lkml.org 
[lkml]   [2019]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [RFC][PATCH] hwmon: (ina2xx) Improve current and power reading precision
    Hi Guenter,

    On Thu, Jan 17, 2019 at 03:13:23PM -0800, Guenter Roeck wrote:

    > I have one claim stating that your change won't make a difference,
    > and your claim that it would. That leaves me with no choice but to
    > spend a large amount of time with the datasheet, and possibly with
    > my evaluation boards, trying to find out who is correct. Unfortunately,
    > time is scarce to come by those days. I would very much prefer for
    > you folks to sort out your differences and present me with a single
    > opinion.
    >
    > Long term the best solution would really be to replace the hwmon
    > driver with the iio driver and use the iio-hwmon bridge. The ina2xx
    > driver doesn't support limits, so there is no real benefit of using
    > the hwmon driver over the iio driver, at least assuming that the
    > iio driver supports all the attributes. So maybe you should make your
    > case for the changes in the iio driver.

    Thanks for the input. Let's drop this hwmon change then.

    \
     
     \ /
      Last update: 2019-01-18 00:16    [W:4.037 / U:0.004 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site