Messages in this thread Patch in this message | | | From | Nicolin Chen <> | Subject | [PATCH v3 1/2] dt-bindings: hwmon: ina3221: Add ti,single-shot property | Date | Thu, 17 Jan 2019 15:12:52 -0800 |
| |
By default, ina3221, as a hardware monitor, continuously measures the inputs and generates corresponding data. However, for battery powered devices, this mode might be power consuming.
This patch adds a "ti,single-shot" property to allow changing the default continuous mode to single-shot operating mode.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> --- Changelog v2->v3: * Added "Reviewed-by" from Rob v1->v2: * N/A
Documentation/devicetree/bindings/hwmon/ina3221.txt | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings/hwmon/ina3221.txt b/Documentation/devicetree/bindings/hwmon/ina3221.txt index a7b25caa2b8e..fa63b6171407 100644 --- a/Documentation/devicetree/bindings/hwmon/ina3221.txt +++ b/Documentation/devicetree/bindings/hwmon/ina3221.txt @@ -6,6 +6,16 @@ Texas Instruments INA3221 Device Tree Bindings - reg: I2C address Optional properties: + - ti,single-shot: This chip has two power modes: single-shot (chip takes one + measurement and then shuts itself down) and continuous ( + chip takes continuous measurements). The continuous mode is + more reliable and suitable for hardware monitor type device, + but the single-shot mode is more power-friendly and useful + for battery-powered device which cares power consumptions + while still needs some measurements occasionally. + If this property is present, the single-shot mode will be + used, instead of the default continuous one for monitoring. + = The node contains optional child nodes for three channels = = Each child node describes the information of input source = -- 2.17.1
| |