lkml.org 
[lkml]   [2019]   [Jan]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v5 08/14] ARM: dts: qcom: pm8941: add interrupt controller properties
    Date
    Add interrupt controller properties now that spmi-gpio is a proper
    hierarchical IRQ chip. The interrupts property is no longer needed so
    remove it. Code was tested on the LG Nexus 5 (hammerhead) phone.

    Signed-off-by: Brian Masney <masneyb@onstation.org>
    Reviewed-by: Stephen Boyd <sboyd@kernel.org>
    Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
    ---
    Changes since v4:
    - None

    Changes since v3:
    - None

    Changes since v2:
    - Remove interrupt-parent property

    Changes since v1:
    - Interrupts are now two cells instead of four cells.
    - Drop unnecessary interrupts property.

    arch/arm/boot/dts/qcom-pm8941.dtsi | 38 ++----------------------------
    1 file changed, 2 insertions(+), 36 deletions(-)

    diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
    index 2515c5c217ac..e65049e0fb45 100644
    --- a/arch/arm/boot/dts/qcom-pm8941.dtsi
    +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
    @@ -64,42 +64,8 @@
    reg = <0xc000>;
    gpio-controller;
    #gpio-cells = <2>;
    - interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
    - <0 0xc1 0 IRQ_TYPE_NONE>,
    - <0 0xc2 0 IRQ_TYPE_NONE>,
    - <0 0xc3 0 IRQ_TYPE_NONE>,
    - <0 0xc4 0 IRQ_TYPE_NONE>,
    - <0 0xc5 0 IRQ_TYPE_NONE>,
    - <0 0xc6 0 IRQ_TYPE_NONE>,
    - <0 0xc7 0 IRQ_TYPE_NONE>,
    - <0 0xc8 0 IRQ_TYPE_NONE>,
    - <0 0xc9 0 IRQ_TYPE_NONE>,
    - <0 0xca 0 IRQ_TYPE_NONE>,
    - <0 0xcb 0 IRQ_TYPE_NONE>,
    - <0 0xcc 0 IRQ_TYPE_NONE>,
    - <0 0xcd 0 IRQ_TYPE_NONE>,
    - <0 0xce 0 IRQ_TYPE_NONE>,
    - <0 0xcf 0 IRQ_TYPE_NONE>,
    - <0 0xd0 0 IRQ_TYPE_NONE>,
    - <0 0xd1 0 IRQ_TYPE_NONE>,
    - <0 0xd2 0 IRQ_TYPE_NONE>,
    - <0 0xd3 0 IRQ_TYPE_NONE>,
    - <0 0xd4 0 IRQ_TYPE_NONE>,
    - <0 0xd5 0 IRQ_TYPE_NONE>,
    - <0 0xd6 0 IRQ_TYPE_NONE>,
    - <0 0xd7 0 IRQ_TYPE_NONE>,
    - <0 0xd8 0 IRQ_TYPE_NONE>,
    - <0 0xd9 0 IRQ_TYPE_NONE>,
    - <0 0xda 0 IRQ_TYPE_NONE>,
    - <0 0xdb 0 IRQ_TYPE_NONE>,
    - <0 0xdc 0 IRQ_TYPE_NONE>,
    - <0 0xdd 0 IRQ_TYPE_NONE>,
    - <0 0xde 0 IRQ_TYPE_NONE>,
    - <0 0xdf 0 IRQ_TYPE_NONE>,
    - <0 0xe0 0 IRQ_TYPE_NONE>,
    - <0 0xe1 0 IRQ_TYPE_NONE>,
    - <0 0xe2 0 IRQ_TYPE_NONE>,
    - <0 0xe3 0 IRQ_TYPE_NONE>;
    + interrupt-controller;
    + #interrupt-cells = <2>;

    boost_bypass_n_pin: boost-bypass {
    pins = "gpio21";
    --
    2.17.2
    \
     
     \ /
      Last update: 2019-01-17 01:37    [W:3.846 / U:0.132 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site