lkml.org 
[lkml]   [2019]   [Jan]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v8 4/4] clk: meson: add sub MMC clock controller driver
Date
Hi Stephen,

Thank you for your time.
Please see my comments below.

On 2019/1/10 4:48, Stephen Boyd wrote:
> Quoting Jianxin Pan (2018-12-17 08:24:10)
>> diff --git a/drivers/clk/meson/mmc-clkc.c b/drivers/clk/meson/mmc-clkc.c
>> new file mode 100644
>> index 0000000..2582a98
>> --- /dev/null
>> +++ b/drivers/clk/meson/mmc-clkc.c
>> @@ -0,0 +1,304 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Amlogic Meson MMC Sub Clock Controller Driver
>> + *
>> + * Copyright (c) 2017 Baylibre SAS.
>> + * Author: Jerome Brunet <jbrunet@baylibre.com>
>> + *
>> + * Copyright (c) 2018 Amlogic, inc.
>> + * Author: Yixun Lan <yixun.lan@amlogic.com>
>> + * Author: Jianxin Pan <jianxin.pan@amlogic.com>
>> + */
>> +
>> +#include <linux/clk.h>
>
> Do you need this include?
>
Yes, It's also a clock-consumer.
devm_clk_get() gets clock from dts as the parent of mux.
Thank you for your review.
>> +#include <linux/clk-provider.h>
>> +#include <linux/module.h>
>> +#include <linux/regmap.h>
>> +#include <linux/slab.h>
>> +#include <linux/of_device.h>
>> +#include <linux/mfd/syscon.h>
>
> Is this used?
Yes, syscon_node_to_regmap() is used in mmc_clkc_probe().
>
>> +#include <linux/platform_device.h>
> [...]
>> + init.num_parents = 1;
>> +
>> + clk = mmc_clkc_register_clk(dev, map, &init, suffix, data);
>> + if (IS_ERR(clk))
>> + dev_err(dev, "%s clock registration failed\n", suffix);
>> +
>> + return clk;
>> +}
>> +
>> +static int mmc_clkc_probe(struct platform_device *pdev)
>> +{
>> + struct clk_hw_onecell_data *onecell_data;
>> + struct device *dev = &pdev->dev;
>> + struct mmc_clkc_data *data;
>> + struct regmap *map;
>> + struct clk_regmap *clk, *core;
>> + struct meson_sclk_div_data *div_data;
>> +
>> + /*cast to drop the const in match->data*/
>> + data = (struct mmc_clkc_data *)of_device_get_match_data(dev);
>
> Is that necessary? Maybe the users of this should take a const argument
> and copy things?
OK, I can alloc two extra memory for PHASE_RX and PHASE_TX data, and then copy from const data to them.
>
>> + if (!data)
>> + return -ENODEV;
>> +
>> + map = syscon_node_to_regmap(dev->of_node);
>> + if (IS_ERR(map)) {
>> + dev_err(dev, "could not find mmc clock controller\n");
>> + return PTR_ERR(map);
>> + }
>> +
>> + onecell_data = devm_kzalloc(dev, sizeof(*onecell_data) +
>> + sizeof(*onecell_data->hws) * MMC_MAX_CLKS,
>
> struct_size()?
>
OK, I will change it in the next version.
Thank you for your review.
> .
>

\
 
 \ /
  Last update: 2019-01-15 17:29    [W:0.057 / U:1.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site