lkml.org 
[lkml]   [2019]   [Jan]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 3/4] usb: musb: Extract set toggle as a separate interface
From
Date


On 15/01/2019 02:43, min.guo@mediatek.com wrote:
> From: Min Guo <min.guo@mediatek.com>
>
> Add a common interface for set data toggle
>
> Signed-off-by: Min Guo <min.guo@mediatek.com>
> ---
> drivers/usb/musb/musb_host.c | 37 +++++++++++++++++++++++--------------
> 1 file changed, 23 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
> index b59ce9a..16d0ba4 100644
> --- a/drivers/usb/musb/musb_host.c
> +++ b/drivers/usb/musb/musb_host.c
> @@ -306,6 +306,25 @@ static inline void musb_save_toggle(struct musb_qh *qh, int is_in,
> usb_settoggle(urb->dev, qh->epnum, !is_in, csr ? 1 : 0);
> }
>
> +static inline u16 musb_set_toggle(struct musb_qh *qh, int is_in,
> + struct urb *urb)
> +{
> + u16 csr = 0;
> + u16 toggle = 0;
> +
> + toggle = usb_gettoggle(urb->dev, qh->epnum, !is_in);
> +
> + if (is_in)
> + csr = toggle ? (MUSB_RXCSR_H_WR_DATATOGGLE
> + | MUSB_RXCSR_H_DATATOGGLE) : 0;
> + else
> + csr = toggle ? (MUSB_TXCSR_H_WR_DATATOGGLE
> + | MUSB_TXCSR_H_DATATOGGLE)
> + : MUSB_TXCSR_CLRDATATOG;

Can we switch the if and use is_out logic as function parameter. This would make
the code easier to understand.

Regards,
Matthias

> +
> + return csr;
> +}
> +
> /*
> * Advance this hardware endpoint's queue, completing the specified URB and
> * advancing to either the next URB queued to that qh, or else invalidating
> @@ -772,13 +791,8 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
> );
> csr |= MUSB_TXCSR_MODE;
>
> - if (!hw_ep->tx_double_buffered) {
> - if (usb_gettoggle(urb->dev, qh->epnum, 1))
> - csr |= MUSB_TXCSR_H_WR_DATATOGGLE
> - | MUSB_TXCSR_H_DATATOGGLE;
> - else
> - csr |= MUSB_TXCSR_CLRDATATOG;
> - }
> + if (!hw_ep->tx_double_buffered)
> + csr |= musb_set_toggle(qh, !is_out, urb);
>
> musb_writew(epio, MUSB_TXCSR, csr);
> /* REVISIT may need to clear FLUSHFIFO ... */
> @@ -860,17 +874,12 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
>
> /* IN/receive */
> } else {
> - u16 csr;
> + u16 csr = 0;
>
> if (hw_ep->rx_reinit) {
> musb_rx_reinit(musb, qh, epnum);
> + csr |= musb_set_toggle(qh, !is_out, urb);
>
> - /* init new state: toggle and NYET, maybe DMA later */
> - if (usb_gettoggle(urb->dev, qh->epnum, 0))
> - csr = MUSB_RXCSR_H_WR_DATATOGGLE
> - | MUSB_RXCSR_H_DATATOGGLE;
> - else
> - csr = 0;
> if (qh->type == USB_ENDPOINT_XFER_INT)
> csr |= MUSB_RXCSR_DISNYET;
>
>

\
 
 \ /
  Last update: 2019-01-15 16:19    [W:0.101 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site