lkml.org 
[lkml]   [2019]   [Jan]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 1/4] tee: add bus driver framework for TEE based devices
On Fri, 11 Jan 2019 at 20:39, Bhupesh Sharma <bhsharma@redhat.com> wrote:
>
> Hi Sumit,
>
> Thanks for the patch. Some nitpicks in-line:
>

Apologies for delay in my response as I was on leave. Please find my
comments inline.

Will include these nitpicks in v4 but let me wait for any further
major comments.

> On 01/11/2019 05:17 PM, Sumit Garg wrote:
> > Introduce a generic TEE bus driver concept for TEE based kernel drivers
> > which would like to communicate with TEE based devices/services.
> >
> > In this TEE bus concept, devices/services are identified via Universally
> > Unique Identifier (UUID) and drivers register a table of device UUIDs
> > which they can support.
> >
> > So this TEE bus framework registers a match() callback function which
> > iterates over the driver UUID table to find a corresponding match for
> > device UUID. If a match is found, then this particular device is probed
> > via corresponding probe api registered by the driver. This process
> > happens whenever a device or a driver is registered with TEE bus.
> >
> > Also this framework allows for device enumeration to be specific to
> > corresponding TEE implementation like OP-TEE etc.
> >
> > Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
> > ---
> > drivers/tee/tee_core.c | 43 ++++++++++++++++++++++++++++++++++++++++---
> > include/linux/tee_drv.h | 36 ++++++++++++++++++++++++++++++++++++
> > 2 files changed, 76 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/tee/tee_core.c b/drivers/tee/tee_core.c
> > index 7b2bb4c..a685940 100644
> > --- a/drivers/tee/tee_core.c
> > +++ b/drivers/tee/tee_core.c
> > @@ -15,7 +15,6 @@
> > #define pr_fmt(fmt) "%s: " fmt, __func__
> >
> > #include <linux/cdev.h>
> > -#include <linux/device.h>
> > #include <linux/fs.h>
> > #include <linux/idr.h>
> > #include <linux/module.h>
> > @@ -1027,6 +1026,30 @@ int tee_client_invoke_func(struct tee_context *ctx,
> > }
> > EXPORT_SYMBOL_GPL(tee_client_invoke_func);
> >
> > +static int tee_client_device_match(struct device *dev,
> > + struct device_driver *drv)
> > +{
> > + struct tee_client_device *tee_device;
> > + const struct tee_client_device_id *id_table;
> > +
> > + tee_device = to_tee_client_device(dev);
> > + id_table = to_tee_client_driver(drv)->id_table;
> > +
> > + while (!uuid_is_null(&id_table->uuid)) {
> > + if (uuid_equal(&tee_device->id.uuid, &id_table->uuid))
> > + return 1;
> > + id_table++;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +struct bus_type tee_bus_type = {
> > + .name = "tee",
> > + .match = tee_client_device_match,
> > +};
> > +EXPORT_SYMBOL_GPL(tee_bus_type);
> > +
> > static int __init tee_init(void)
> > {
> > int rc;
> > @@ -1040,10 +1063,23 @@ static int __init tee_init(void)
> > rc = alloc_chrdev_region(&tee_devt, 0, TEE_NUM_DEVICES, "tee");
> > if (rc) {
> > pr_err("failed to allocate char dev region\n");
> > - class_destroy(tee_class);
> > - tee_class = NULL;
> > + goto chrdev_err;
> > }
> >
> > + rc = bus_register(&tee_bus_type);
> > + if (rc) {
> > + pr_err("failed to register tee bus\n");
> > + goto bus_err;
> > + }
> > +
> > + return 0;
> > +
> > +bus_err:
> > + unregister_chrdev_region(tee_devt, TEE_NUM_DEVICES);
> > +chrdev_err:
> > + class_destroy(tee_class);
> > + tee_class = NULL;
> > +
>
> Hmm.. these error paths/labels look out-of-order.
> See 'drivers/i2c/i2c-dev.c' for example.
>
> Normally our error paths in an __init function is of the same order as
> the __exit function implementation. So this should be changed to
> something like:
>
> +out_unreg_class:
> + class_destroy(tee_class);
> + tee_class = NULL;
> +out_unreg_chrdev:
> + unregister_chrdev_region(tee_devt, TEE_NUM_DEVICES);
>

It seems that prior to this patch also allocation order in __init
function differed from release order in __exit function. Will correct
that too along with this.

> > return rc;
> > }
> >
> > @@ -1052,6 +1088,7 @@ static void __exit tee_exit(void)
> > class_destroy(tee_class);
> > tee_class = NULL;
> > unregister_chrdev_region(tee_devt, TEE_NUM_DEVICES);
> > + bus_unregister(&tee_bus_type);
>
> Since the __exit function order is the reverse of the __init one, lets
> reorder this as:
>
> + bus_unregister(&tee_bus_type);
> class_destroy(tee_class);
> tee_class = NULL;
> unregister_chrdev_region(tee_devt, TEE_NUM_DEVICES);
>

Ok.

> See 'drivers/i2c/i2c-dev.c' for example.
>
> > }
> >
> > subsys_initcall(tee_init);
> > diff --git a/include/linux/tee_drv.h b/include/linux/tee_drv.h
> > index 6cfe058..ed16bf1 100644
> > --- a/include/linux/tee_drv.h
> > +++ b/include/linux/tee_drv.h
> > @@ -20,6 +20,8 @@
> > #include <linux/kref.h>
> > #include <linux/list.h>
> > #include <linux/tee.h>
> > +#include <linux/device.h>
> > +#include <linux/uuid.h>
>
> If possible, let's keep alphabetical order of header files when making
> changes in the patch.
>

Ok.

> >
> > /*
> > * The file describes the API provided by the generic TEE driver to the
> > @@ -538,4 +540,38 @@ static inline bool tee_param_is_memref(struct tee_param *param)
> > }
> > }
> >
> > +extern struct bus_type tee_bus_type;
> > +
> > +/**
> > + * struct tee_client_device_id - tee based device identifier
> > + * @uuid: For TEE based client devices we use the device uuid
> > + * as the identifier.
> > + */
> > +struct tee_client_device_id {
> > + uuid_t uuid;
> > +};
>
> Hmm.. Do we really need a struct for a single element, rather lets use a
> simple typedef here.
>

Agree, will rather use typedef here.

> > +
> > +/**
> > + * struct tee_client_device - tee based device
> > + * @id: device identifier
> > + * @dev: device structure
> > + */
> > +struct tee_client_device {
> > + struct tee_client_device_id id;
> > + struct device dev;
> > +};
>
> Add a blank line here.
>

Ok.

> > +#define to_tee_client_device(d) container_of(d, struct tee_client_device, dev)
> > +
> > +/**
> > + * struct tee_client_driver - tee client driver
> > + * @id_table: device id table supported by this driver
> > + * @driver: driver structure
> > + */
> > +struct tee_client_driver {
> > + const struct tee_client_device_id *id_table;
> > + struct device_driver driver;
> > +};
>
> Add a blank line here.

Ok.

-Sumit

> > +#define to_tee_client_driver(d) \
> > + container_of(d, struct tee_client_driver, driver)
> > +
> > #endif /*__TEE_DRV_H*/
> >
>
> Thanks,
> Bhupesh

\
 
 \ /
  Last update: 2019-01-15 12:55    [W:0.053 / U:0.420 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site