lkml.org 
[lkml]   [2019]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 02/14] media: ov7670: split register setting from set_framerate() logic
On Tue, Nov 20, 2018 at 11:03:07AM +0100, Lubomir Rintel wrote:
> This will allow us to restore the last set frame rate after the device
> returns from a power off.
>
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
>
> ---
> Changes since v2:
> - This patch was added to the series
>
> drivers/media/i2c/ov7670.c | 30 ++++++++++++++----------------
> 1 file changed, 14 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/media/i2c/ov7670.c b/drivers/media/i2c/ov7670.c
> index ee2302fbdeee..ead0c360df33 100644
> --- a/drivers/media/i2c/ov7670.c
> +++ b/drivers/media/i2c/ov7670.c
> @@ -810,13 +810,24 @@ static void ov7675_get_framerate(struct v4l2_subdev *sd,
> (4 * clkrc);
> }
>
> +static int ov7675_apply_framerate(struct v4l2_subdev *sd)
> +{
> + struct ov7670_info *info = to_state(sd);
> + int ret;
> +
> + ret = ov7670_write(sd, REG_CLKRC, info->clkrc);
> + if (ret < 0)
> + return ret;
> +
> + return ov7670_write(sd, REG_DBLV, info->pll_bypass ? DBLV_BYPASS : DBLV_X4);
> +}
> +
> static int ov7675_set_framerate(struct v4l2_subdev *sd,
> struct v4l2_fract *tpf)
> {
> struct ov7670_info *info = to_state(sd);
> u32 clkrc;
> int pll_factor;
> - int ret;
>
> /*
> * The formula is fps = 5/4*pixclk for YUV/RGB and
> @@ -825,19 +836,10 @@ static int ov7675_set_framerate(struct v4l2_subdev *sd,
> * pixclk = clock_speed / (clkrc + 1) * PLLfactor
> *
> */
> - if (info->pll_bypass) {
> - pll_factor = 1;
> - ret = ov7670_write(sd, REG_DBLV, DBLV_BYPASS);
> - } else {
> - pll_factor = PLL_FACTOR;
> - ret = ov7670_write(sd, REG_DBLV, DBLV_X4);
> - }
> - if (ret < 0)
> - return ret;
> -
> if (tpf->numerator == 0 || tpf->denominator == 0) {
> clkrc = 0;
> } else {
> + pll_factor = info->pll_bypass ? 1 : PLL_FACTOR;
> clkrc = (5 * pll_factor * info->clock_speed * tpf->numerator) /
> (4 * tpf->denominator);
> if (info->fmt->mbus_code == MEDIA_BUS_FMT_SBGGR8_1X8)
> @@ -859,11 +861,7 @@ static int ov7675_set_framerate(struct v4l2_subdev *sd,
> /* Recalculate frame rate */
> ov7675_get_framerate(sd, tpf);
>
> - ret = ov7670_write(sd, REG_CLKRC, info->clkrc);
> - if (ret < 0)
> - return ret;
> -
> - return ov7670_write(sd, REG_DBLV, DBLV_X4);
> + return ov7675_apply_framerate(sd);
> }
>
> static void ov7670_get_framerate_legacy(struct v4l2_subdev *sd,

Unfortunately this one no longer applies due to Jacopo's patch "v4l2: i2c:
ov7670: Fix PLL bypass register values" in my tree. Could you resend it if
you still think it's useful, please?

My tree is here:

<URL:https://git.linuxtv.org/sailus/media_tree.git/log/>

I've applied the rest there, with a trivial patch I'll send briefly.

Thanks.

--
Sakari Ailus

\
 
 \ /
  Last update: 2019-01-15 00:05    [W:0.069 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site