lkml.org 
[lkml]   [2019]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCHv2 3/7] mm/memblock: introduce allocation boundary for tracing purpose
On Mon, Jan 14, 2019 at 3:51 PM Mike Rapoport <rppt@linux.ibm.com> wrote:
>
> Hi Pingfan,
>
> On Fri, Jan 11, 2019 at 01:12:53PM +0800, Pingfan Liu wrote:
> > During boot time, there is requirement to tell whether a series of func
> > call will consume memory or not. For some reason, a temporary memory
> > resource can be loan to those func through memblock allocator, but at a
> > check point, all of the loan memory should be turned back.
> > A typical using style:
> > -1. find a usable range by memblock_find_in_range(), said, [A,B]
> > -2. before calling a series of func, memblock_set_current_limit(A,B,true)
> > -3. call funcs
> > -4. memblock_find_in_range(A,B,B-A,1), if failed, then some memory is not
> > turned back.
> > -5. reset the original limit
> >
> > E.g. in the case of hotmovable memory, some acpi routines should be called,
> > and they are not allowed to own some movable memory. Although at present
> > these functions do not consume memory, but later, if changed without
> > awareness, they may do. With the above method, the allocation can be
> > detected, and pr_warn() to ask people to resolve it.
>
> To ensure there were that a sequence of function calls didn't create new
> memblock allocations you can simply check the number of the reserved
> regions before and after that sequence.
>
Yes, thank you point out it.

> Still, I'm not sure it would be practical to try tracking what code that's called
> from x86::setup_arch() did memory allocation.
> Probably a better approach is to verify no memory ended up in the movable
> areas after their extents are known.
>
It is a probability problem whether allocated memory sit on hotmovable
memory or not. And if warning based on the verification, then it is
also a probability problem and maybe we will miss it.

Thanks and regards,
Pingfan

> > Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
> > Cc: Thomas Gleixner <tglx@linutronix.de>
> > Cc: Ingo Molnar <mingo@redhat.com>
> > Cc: Borislav Petkov <bp@alien8.de>
> > Cc: "H. Peter Anvin" <hpa@zytor.com>
> > Cc: Dave Hansen <dave.hansen@linux.intel.com>
> > Cc: Andy Lutomirski <luto@kernel.org>
> > Cc: Peter Zijlstra <peterz@infradead.org>
> > Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
> > Cc: Len Brown <lenb@kernel.org>
> > Cc: Yinghai Lu <yinghai@kernel.org>
> > Cc: Tejun Heo <tj@kernel.org>
> > Cc: Chao Fan <fanc.fnst@cn.fujitsu.com>
> > Cc: Baoquan He <bhe@redhat.com>
> > Cc: Juergen Gross <jgross@suse.com>
> > Cc: Andrew Morton <akpm@linux-foundation.org>
> > Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
> > Cc: Vlastimil Babka <vbabka@suse.cz>
> > Cc: Michal Hocko <mhocko@suse.com>
> > Cc: x86@kernel.org
> > Cc: linux-acpi@vger.kernel.org
> > Cc: linux-mm@kvack.org
> > ---
> > arch/arm/mm/init.c | 3 ++-
> > arch/arm/mm/mmu.c | 4 ++--
> > arch/arm/mm/nommu.c | 2 +-
> > arch/csky/kernel/setup.c | 2 +-
> > arch/microblaze/mm/init.c | 2 +-
> > arch/mips/kernel/setup.c | 2 +-
> > arch/powerpc/mm/40x_mmu.c | 6 ++++--
> > arch/powerpc/mm/44x_mmu.c | 2 +-
> > arch/powerpc/mm/8xx_mmu.c | 2 +-
> > arch/powerpc/mm/fsl_booke_mmu.c | 5 +++--
> > arch/powerpc/mm/hash_utils_64.c | 4 ++--
> > arch/powerpc/mm/init_32.c | 2 +-
> > arch/powerpc/mm/pgtable-radix.c | 2 +-
> > arch/powerpc/mm/ppc_mmu_32.c | 8 ++++++--
> > arch/powerpc/mm/tlb_nohash.c | 6 ++++--
> > arch/unicore32/mm/mmu.c | 2 +-
> > arch/x86/kernel/setup.c | 2 +-
> > arch/xtensa/mm/init.c | 2 +-
> > include/linux/memblock.h | 10 +++++++---
> > mm/memblock.c | 23 ++++++++++++++++++-----
> > 20 files changed, 59 insertions(+), 32 deletions(-)
> >
> > diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
> > index 32e4845..58a4342 100644
> > --- a/arch/arm/mm/init.c
> > +++ b/arch/arm/mm/init.c
> > @@ -93,7 +93,8 @@ __tagtable(ATAG_INITRD2, parse_tag_initrd2);
> > static void __init find_limits(unsigned long *min, unsigned long *max_low,
> > unsigned long *max_high)
> > {
> > - *max_low = PFN_DOWN(memblock_get_current_limit());
> > + memblock_get_current_limit(NULL, max_low);
> > + *max_low = PFN_DOWN(*max_low);
> > *min = PFN_UP(memblock_start_of_DRAM());
> > *max_high = PFN_DOWN(memblock_end_of_DRAM());
> > }
> > diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
> > index f5cc1cc..9025418 100644
> > --- a/arch/arm/mm/mmu.c
> > +++ b/arch/arm/mm/mmu.c
> > @@ -1240,7 +1240,7 @@ void __init adjust_lowmem_bounds(void)
> > }
> > }
> >
> > - memblock_set_current_limit(memblock_limit);
> > + memblock_set_current_limit(0, memblock_limit, false);
> > }
> >
> > static inline void prepare_page_table(void)
> > @@ -1625,7 +1625,7 @@ void __init paging_init(const struct machine_desc *mdesc)
> >
> > prepare_page_table();
> > map_lowmem();
> > - memblock_set_current_limit(arm_lowmem_limit);
> > + memblock_set_current_limit(0, arm_lowmem_limit, false);
> > dma_contiguous_remap();
> > early_fixmap_shutdown();
> > devicemaps_init(mdesc);
> > diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
> > index 7d67c70..721535c 100644
> > --- a/arch/arm/mm/nommu.c
> > +++ b/arch/arm/mm/nommu.c
> > @@ -138,7 +138,7 @@ void __init adjust_lowmem_bounds(void)
> > adjust_lowmem_bounds_mpu();
> > end = memblock_end_of_DRAM();
> > high_memory = __va(end - 1) + 1;
> > - memblock_set_current_limit(end);
> > + memblock_set_current_limit(0, end, false);
> > }
> >
> > /*
> > diff --git a/arch/csky/kernel/setup.c b/arch/csky/kernel/setup.c
> > index dff8b89..e6f88bf 100644
> > --- a/arch/csky/kernel/setup.c
> > +++ b/arch/csky/kernel/setup.c
> > @@ -100,7 +100,7 @@ static void __init csky_memblock_init(void)
> >
> > highend_pfn = max_pfn;
> > #endif
> > - memblock_set_current_limit(PFN_PHYS(max_low_pfn));
> > + memblock_set_current_limit(0, PFN_PHYS(max_low_pfn), false);
> >
> > dma_contiguous_reserve(0);
> >
> > diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c
> > index b17fd8a..cee99da 100644
> > --- a/arch/microblaze/mm/init.c
> > +++ b/arch/microblaze/mm/init.c
> > @@ -353,7 +353,7 @@ asmlinkage void __init mmu_init(void)
> > /* Shortly after that, the entire linear mapping will be available */
> > /* This will also cause that unflatten device tree will be allocated
> > * inside 768MB limit */
> > - memblock_set_current_limit(memory_start + lowmem_size - 1);
> > + memblock_set_current_limit(0, memory_start + lowmem_size - 1, false);
> > }
> >
> > /* This is only called until mem_init is done. */
> > diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
> > index 8c6c48ed..62dabe1 100644
> > --- a/arch/mips/kernel/setup.c
> > +++ b/arch/mips/kernel/setup.c
> > @@ -862,7 +862,7 @@ static void __init arch_mem_init(char **cmdline_p)
> > * with memblock_reserve; memblock_alloc* can be used
> > * only after this point
> > */
> > - memblock_set_current_limit(PFN_PHYS(max_low_pfn));
> > + memblock_set_current_limit(0, PFN_PHYS(max_low_pfn), false);
> >
> > #ifdef CONFIG_PROC_VMCORE
> > if (setup_elfcorehdr && setup_elfcorehdr_size) {
> > diff --git a/arch/powerpc/mm/40x_mmu.c b/arch/powerpc/mm/40x_mmu.c
> > index 61ac468..427bb56 100644
> > --- a/arch/powerpc/mm/40x_mmu.c
> > +++ b/arch/powerpc/mm/40x_mmu.c
> > @@ -141,7 +141,7 @@ unsigned long __init mmu_mapin_ram(unsigned long top)
> > * coverage with normal-sized pages (or other reasons) do not
> > * attempt to allocate outside the allowed range.
> > */
> > - memblock_set_current_limit(mapped);
> > + memblock_set_current_limit(0, mapped, false);
> >
> > return mapped;
> > }
> > @@ -155,5 +155,7 @@ void setup_initial_memory_limit(phys_addr_t first_memblock_base,
> > BUG_ON(first_memblock_base != 0);
> >
> > /* 40x can only access 16MB at the moment (see head_40x.S) */
> > - memblock_set_current_limit(min_t(u64, first_memblock_size, 0x00800000));
> > + memblock_set_current_limit(0,
> > + min_t(u64, first_memblock_size, 0x00800000),
> > + false);
> > }
> > diff --git a/arch/powerpc/mm/44x_mmu.c b/arch/powerpc/mm/44x_mmu.c
> > index 12d9251..3cf127d 100644
> > --- a/arch/powerpc/mm/44x_mmu.c
> > +++ b/arch/powerpc/mm/44x_mmu.c
> > @@ -225,7 +225,7 @@ void setup_initial_memory_limit(phys_addr_t first_memblock_base,
> >
> > /* 44x has a 256M TLB entry pinned at boot */
> > size = (min_t(u64, first_memblock_size, PPC_PIN_SIZE));
> > - memblock_set_current_limit(first_memblock_base + size);
> > + memblock_set_current_limit(0, first_memblock_base + size, false);
> > }
> >
> > #ifdef CONFIG_SMP
> > diff --git a/arch/powerpc/mm/8xx_mmu.c b/arch/powerpc/mm/8xx_mmu.c
> > index 01b7f51..c75bca6 100644
> > --- a/arch/powerpc/mm/8xx_mmu.c
> > +++ b/arch/powerpc/mm/8xx_mmu.c
> > @@ -135,7 +135,7 @@ unsigned long __init mmu_mapin_ram(unsigned long top)
> > * attempt to allocate outside the allowed range.
> > */
> > if (mapped)
> > - memblock_set_current_limit(mapped);
> > + memblock_set_current_limit(0, mapped, false);
> >
> > block_mapped_ram = mapped;
> >
> > diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c
> > index 080d49b..3be24b8 100644
> > --- a/arch/powerpc/mm/fsl_booke_mmu.c
> > +++ b/arch/powerpc/mm/fsl_booke_mmu.c
> > @@ -252,7 +252,8 @@ void __init adjust_total_lowmem(void)
> > pr_cont("%lu Mb, residual: %dMb\n", tlbcam_sz(tlbcam_index - 1) >> 20,
> > (unsigned int)((total_lowmem - __max_low_memory) >> 20));
> >
> > - memblock_set_current_limit(memstart_addr + __max_low_memory);
> > + memblock_set_current_limit(0,
> > + memstart_addr + __max_low_memory, false);
> > }
> >
> > void setup_initial_memory_limit(phys_addr_t first_memblock_base,
> > @@ -261,7 +262,7 @@ void setup_initial_memory_limit(phys_addr_t first_memblock_base,
> > phys_addr_t limit = first_memblock_base + first_memblock_size;
> >
> > /* 64M mapped initially according to head_fsl_booke.S */
> > - memblock_set_current_limit(min_t(u64, limit, 0x04000000));
> > + memblock_set_current_limit(0, min_t(u64, limit, 0x04000000), false);
> > }
> >
> > #ifdef CONFIG_RELOCATABLE
> > diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
> > index 0cc7fbc..30fba80 100644
> > --- a/arch/powerpc/mm/hash_utils_64.c
> > +++ b/arch/powerpc/mm/hash_utils_64.c
> > @@ -925,7 +925,7 @@ static void __init htab_initialize(void)
> > BUG_ON(htab_bolt_mapping(base, base + size, __pa(base),
> > prot, mmu_linear_psize, mmu_kernel_ssize));
> > }
> > - memblock_set_current_limit(MEMBLOCK_ALLOC_ANYWHERE);
> > + memblock_set_current_limit(0, MEMBLOCK_ALLOC_ANYWHERE, false);
> >
> > /*
> > * If we have a memory_limit and we've allocated TCEs then we need to
> > @@ -1867,7 +1867,7 @@ void hash__setup_initial_memory_limit(phys_addr_t first_memblock_base,
> > ppc64_rma_size = min_t(u64, ppc64_rma_size, 0x40000000);
> >
> > /* Finally limit subsequent allocations */
> > - memblock_set_current_limit(ppc64_rma_size);
> > + memblock_set_current_limit(0, ppc64_rma_size, false);
> > } else {
> > ppc64_rma_size = ULONG_MAX;
> > }
> > diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
> > index 3e59e5d..863d710 100644
> > --- a/arch/powerpc/mm/init_32.c
> > +++ b/arch/powerpc/mm/init_32.c
> > @@ -183,5 +183,5 @@ void __init MMU_init(void)
> > #endif
> >
> > /* Shortly after that, the entire linear mapping will be available */
> > - memblock_set_current_limit(lowmem_end_addr);
> > + memblock_set_current_limit(0, lowmem_end_addr, false);
> > }
> > diff --git a/arch/powerpc/mm/pgtable-radix.c b/arch/powerpc/mm/pgtable-radix.c
> > index 9311560..8cd5f2d 100644
> > --- a/arch/powerpc/mm/pgtable-radix.c
> > +++ b/arch/powerpc/mm/pgtable-radix.c
> > @@ -603,7 +603,7 @@ void __init radix__early_init_mmu(void)
> > radix_init_pseries();
> > }
> >
> > - memblock_set_current_limit(MEMBLOCK_ALLOC_ANYWHERE);
> > + memblock_set_current_limit(0, MEMBLOCK_ALLOC_ANYWHERE, false);
> >
> > radix_init_iamr();
> > radix_init_pgtable();
> > diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c
> > index f6f575b..80927ad 100644
> > --- a/arch/powerpc/mm/ppc_mmu_32.c
> > +++ b/arch/powerpc/mm/ppc_mmu_32.c
> > @@ -283,7 +283,11 @@ void setup_initial_memory_limit(phys_addr_t first_memblock_base,
> >
> > /* 601 can only access 16MB at the moment */
> > if (PVR_VER(mfspr(SPRN_PVR)) == 1)
> > - memblock_set_current_limit(min_t(u64, first_memblock_size, 0x01000000));
> > + memblock_set_current_limit(0,
> > + min_t(u64, first_memblock_size, 0x01000000),
> > + false);
> > else /* Anything else has 256M mapped */
> > - memblock_set_current_limit(min_t(u64, first_memblock_size, 0x10000000));
> > + memblock_set_current_limit(0,
> > + min_t(u64, first_memblock_size, 0x10000000),
> > + false);
> > }
> > diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
> > index ae5d568..d074362 100644
> > --- a/arch/powerpc/mm/tlb_nohash.c
> > +++ b/arch/powerpc/mm/tlb_nohash.c
> > @@ -735,7 +735,7 @@ static void __init early_mmu_set_memory_limit(void)
> > * reduces the memory available to Linux. We need to
> > * do this because highmem is not supported on 64-bit.
> > */
> > - memblock_enforce_memory_limit(linear_map_top);
> > + memblock_enforce_memory_limit(0, linear_map_top, false);
> > }
> > #endif
> >
> > @@ -792,7 +792,9 @@ void setup_initial_memory_limit(phys_addr_t first_memblock_base,
> > ppc64_rma_size = min_t(u64, first_memblock_size, 0x40000000);
> >
> > /* Finally limit subsequent allocations */
> > - memblock_set_current_limit(first_memblock_base + ppc64_rma_size);
> > + memblock_set_current_limit(0,
> > + first_memblock_base + ppc64_rma_size,
> > + false);
> > }
> > #else /* ! CONFIG_PPC64 */
> > void __init early_init_mmu(void)
> > diff --git a/arch/unicore32/mm/mmu.c b/arch/unicore32/mm/mmu.c
> > index 040a8c2..6d62529 100644
> > --- a/arch/unicore32/mm/mmu.c
> > +++ b/arch/unicore32/mm/mmu.c
> > @@ -286,7 +286,7 @@ static void __init sanity_check_meminfo(void)
> > int i, j;
> >
> > lowmem_limit = __pa(vmalloc_min - 1) + 1;
> > - memblock_set_current_limit(lowmem_limit);
> > + memblock_set_current_limit(0, lowmem_limit, false);
> >
> > for (i = 0, j = 0; i < meminfo.nr_banks; i++) {
> > struct membank *bank = &meminfo.bank[j];
> > diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
> > index dc8fc5d..a0122cd 100644
> > --- a/arch/x86/kernel/setup.c
> > +++ b/arch/x86/kernel/setup.c
> > @@ -1130,7 +1130,7 @@ void __init setup_arch(char **cmdline_p)
> > memblock_set_bottom_up(true);
> > #endif
> > init_mem_mapping();
> > - memblock_set_current_limit(get_max_mapped());
> > + memblock_set_current_limit(0, get_max_mapped(), false);
> >
> > idt_setup_early_pf();
> >
> > diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c
> > index 30a48bb..b924387 100644
> > --- a/arch/xtensa/mm/init.c
> > +++ b/arch/xtensa/mm/init.c
> > @@ -60,7 +60,7 @@ void __init bootmem_init(void)
> > max_pfn = PFN_DOWN(memblock_end_of_DRAM());
> > max_low_pfn = min(max_pfn, MAX_LOW_PFN);
> >
> > - memblock_set_current_limit(PFN_PHYS(max_low_pfn));
> > + memblock_set_current_limit(0, PFN_PHYS(max_low_pfn), false);
> > dma_contiguous_reserve(PFN_PHYS(max_low_pfn));
> >
> > memblock_dump_all();
> > diff --git a/include/linux/memblock.h b/include/linux/memblock.h
> > index aee299a..49676f0 100644
> > --- a/include/linux/memblock.h
> > +++ b/include/linux/memblock.h
> > @@ -88,6 +88,8 @@ struct memblock_type {
> > */
> > struct memblock {
> > bool bottom_up; /* is bottom up direction? */
> > + bool enforce_checking;
> > + phys_addr_t start_limit;
> > phys_addr_t current_limit;
> > struct memblock_type memory;
> > struct memblock_type reserved;
> > @@ -482,12 +484,14 @@ static inline void memblock_dump_all(void)
> > * memblock_set_current_limit - Set the current allocation limit to allow
> > * limiting allocations to what is currently
> > * accessible during boot
> > - * @limit: New limit value (physical address)
> > + * [start_limit, end_limit]: New limit value (physical address)
> > + * enforcing: whether check against the limit boundary or not
> > */
> > -void memblock_set_current_limit(phys_addr_t limit);
> > +void memblock_set_current_limit(phys_addr_t start_limit,
> > + phys_addr_t end_limit, bool enforcing);
> >
> >
> > -phys_addr_t memblock_get_current_limit(void);
> > +bool memblock_get_current_limit(phys_addr_t *start, phys_addr_t *end);
> >
> > /*
> > * pfn conversion functions
> > diff --git a/mm/memblock.c b/mm/memblock.c
> > index 81ae63c..b792be0 100644
> > --- a/mm/memblock.c
> > +++ b/mm/memblock.c
> > @@ -116,6 +116,8 @@ struct memblock memblock __initdata_memblock = {
> > #endif
> >
> > .bottom_up = false,
> > + .enforce_checking = false,
> > + .start_limit = 0,
> > .current_limit = MEMBLOCK_ALLOC_ANYWHERE,
> > };
> >
> > @@ -261,8 +263,11 @@ phys_addr_t __init_memblock memblock_find_in_range_node(phys_addr_t size,
> > {
> > phys_addr_t kernel_end, ret;
> >
> > + if (unlikely(memblock.enforce_checking)) {
> > + start = memblock.start_limit;
> > + end = memblock.current_limit;
> > /* pump up @end */
> > - if (end == MEMBLOCK_ALLOC_ACCESSIBLE)
> > + } else if (end == MEMBLOCK_ALLOC_ACCESSIBLE)
> > end = memblock.current_limit;
> >
> > /* avoid allocating the first page */
> > @@ -1826,14 +1831,22 @@ void __init_memblock memblock_trim_memory(phys_addr_t align)
> > }
> > }
> >
> > -void __init_memblock memblock_set_current_limit(phys_addr_t limit)
> > +void __init_memblock memblock_set_current_limit(phys_addr_t start,
> > + phys_addr_t end, bool enforcing)
> > {
> > - memblock.current_limit = limit;
> > + memblock.start_limit = start;
> > + memblock.current_limit = end;
> > + memblock.enforce_checking = enforcing;
> > }
> >
> > -phys_addr_t __init_memblock memblock_get_current_limit(void)
> > +bool __init_memblock memblock_get_current_limit(phys_addr_t *start,
> > + phys_addr_t *end)
> > {
> > - return memblock.current_limit;
> > + if (start)
> > + *start = memblock.start_limit;
> > + if (end)
> > + *end = memblock.current_limit;
> > + return memblock.enforce_checking;
> > }
> >
> > static void __init_memblock memblock_dump(struct memblock_type *type)
> > --
> > 2.7.4
> >
>
> --
> Sincerely yours,
> Mike.
>

\
 
 \ /
  Last update: 2019-01-14 09:34    [W:0.082 / U:12.492 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site