lkml.org 
[lkml]   [2019]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] iio:st_pressure:initial lps22hh sensor support
Date
From: mario tesi <mario.tesi@st.com>

Initial support for ST LPS22HH pressure sensor. Datasheet:
http://www2.st.com/resource/en/datasheet/lps22hh.pdf

Features:
* pressure, temperature data and timestamping channels
* sampling frequency selection [1..200] Hz
* interrupt based trigger
* over I2C or SPI interface

Signed-off-by: mario tesi <mario.tesi@st.com>
---
drivers/iio/pressure/Kconfig | 2 +-
drivers/iio/pressure/st_pressure.h | 2 +
drivers/iio/pressure/st_pressure_core.c | 69 +++++++++++++++++++++++++++++++++
drivers/iio/pressure/st_pressure_i2c.c | 5 +++
drivers/iio/pressure/st_pressure_spi.c | 5 +++
5 files changed, 82 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig
index eaa7cfc..efeb89f 100644
--- a/drivers/iio/pressure/Kconfig
+++ b/drivers/iio/pressure/Kconfig
@@ -165,7 +165,7 @@ config IIO_ST_PRESS
select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
help
Say yes here to build support for STMicroelectronics pressure
- sensors: LPS001WP, LPS25H, LPS331AP, LPS22HB.
+ sensors: LPS001WP, LPS25H, LPS331AP, LPS22HB, LPS22HH.

This driver can also be built as a module. If so, these modules
will be created:
diff --git a/drivers/iio/pressure/st_pressure.h b/drivers/iio/pressure/st_pressure.h
index e67eb0d..5794660 100644
--- a/drivers/iio/pressure/st_pressure.h
+++ b/drivers/iio/pressure/st_pressure.h
@@ -21,6 +21,7 @@ enum st_press_type {
LPS22HB,
LPS33HW,
LPS35HW,
+ LPS22HH,
ST_PRESS_MAX,
};

@@ -30,6 +31,7 @@ enum st_press_type {
#define LPS22HB_PRESS_DEV_NAME "lps22hb"
#define LPS33HW_PRESS_DEV_NAME "lps33hw"
#define LPS35HW_PRESS_DEV_NAME "lps35hw"
+#define LPS22HH_PRESS_DEV_NAME "lps22hh"

/**
* struct st_sensors_platform_data - default press platform data
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index 4ddb6cf..38dcdb7 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -492,6 +492,75 @@
.multi_read_bit = false,
.bootime = 2,
},
+ {
+ /*
+ * CUSTOM VALUES FOR LPS22HH SENSOR
+ * See LPS22HH datasheet:
+ * http://www2.st.com/resource/en/datasheet/lps22hh.pdf
+ */
+ .wai = 0xb3,
+ .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
+ .sensors_supported = {
+ [0] = LPS22HH_PRESS_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_press_lps22hb_channels,
+ .num_ch = ARRAY_SIZE(st_press_lps22hb_channels),
+ .odr = {
+ .addr = 0x10,
+ .mask = 0x70,
+ .odr_avl = {
+ { .hz = 1, .value = 0x01 },
+ { .hz = 10, .value = 0x02 },
+ { .hz = 25, .value = 0x03 },
+ { .hz = 50, .value = 0x04 },
+ { .hz = 75, .value = 0x05 },
+ { .hz = 100, .value = 0x06 },
+ { .hz = 200, .value = 0x07 },
+ },
+ },
+ .pw = {
+ .addr = 0x10,
+ .mask = 0x70,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .fs = {
+ .fs_avl = {
+ /*
+ * Pressure and temperature sensitivity values
+ * as defined in table 3 of LPS22HH datasheet.
+ */
+ [0] = {
+ .num = ST_PRESS_FS_AVL_1260MB,
+ .gain = ST_PRESS_KPASCAL_NANO_SCALE,
+ .gain2 = ST_PRESS_LPS22HB_LSB_PER_CELSIUS,
+ },
+ },
+ },
+ .bdu = {
+ .addr = 0x10,
+ .mask = BIT(1),
+ },
+ .drdy_irq = {
+ .int1 = {
+ .addr = 0x12,
+ .mask = BIT(2),
+ .addr_od = 0x11,
+ .mask_od = BIT(5),
+ },
+ .addr_ihl = 0x11,
+ .mask_ihl = BIT(6),
+ .stat_drdy = {
+ .addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+ .mask = 0x03,
+ },
+ },
+ .sim = {
+ .addr = 0x10,
+ .value = BIT(0),
+ },
+ .multi_read_bit = false,
+ .bootime = 2,
+ },
};

static int st_press_write_raw(struct iio_dev *indio_dev,
diff --git a/drivers/iio/pressure/st_pressure_i2c.c b/drivers/iio/pressure/st_pressure_i2c.c
index 2026a10..a60849d 100644
--- a/drivers/iio/pressure/st_pressure_i2c.c
+++ b/drivers/iio/pressure/st_pressure_i2c.c
@@ -45,6 +45,10 @@
.compatible = "st,lps35hw",
.data = LPS35HW_PRESS_DEV_NAME,
},
+ {
+ .compatible = "st,lps22hh",
+ .data = LPS22HH_PRESS_DEV_NAME,
+ },
{},
};
MODULE_DEVICE_TABLE(of, st_press_of_match);
@@ -69,6 +73,7 @@
{ LPS22HB_PRESS_DEV_NAME, LPS22HB },
{ LPS33HW_PRESS_DEV_NAME, LPS33HW },
{ LPS35HW_PRESS_DEV_NAME, LPS35HW },
+ { LPS22HH_PRESS_DEV_NAME, LPS22HH },
{},
};
MODULE_DEVICE_TABLE(i2c, st_press_id_table);
diff --git a/drivers/iio/pressure/st_pressure_spi.c b/drivers/iio/pressure/st_pressure_spi.c
index 9a3441b..79a12ed 100644
--- a/drivers/iio/pressure/st_pressure_spi.c
+++ b/drivers/iio/pressure/st_pressure_spi.c
@@ -49,6 +49,10 @@
.compatible = "st,lps35hw",
.data = LPS35HW_PRESS_DEV_NAME,
},
+ {
+ .compatible = "st,lps22hh",
+ .data = LPS22HH_PRESS_DEV_NAME,
+ },
{},
};
MODULE_DEVICE_TABLE(of, st_press_of_match);
@@ -93,6 +97,7 @@ static int st_press_spi_remove(struct spi_device *spi)
{ LPS22HB_PRESS_DEV_NAME },
{ LPS33HW_PRESS_DEV_NAME },
{ LPS35HW_PRESS_DEV_NAME },
+ { LPS22HH_PRESS_DEV_NAME },
{},
};
MODULE_DEVICE_TABLE(spi, st_press_id_table);
--
1.9.1
\
 
 \ /
  Last update: 2019-01-14 18:26    [W:0.053 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site