lkml.org 
[lkml]   [2019]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 03/24] dt-bindings: PCI: keystone: Add "reg-names" binding information
Date
Add "reg-names" binding information in order for device tree node
to be populated with the correct register strings. This will break
old dt compatibility. However Keystone PCI has never worked
in upstream kernel due to lack of SERDES support. Before SERDES
support is added, cleanup the Keystone PCI dt-bindngs. This new
binding will also be used by PCI in AM654 platform.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
Documentation/devicetree/bindings/pci/pci-keystone.txt | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/pci-keystone.txt b/Documentation/devicetree/bindings/pci/pci-keystone.txt
index 2030ee0dc4f9..3a551687cfa2 100644
--- a/Documentation/devicetree/bindings/pci/pci-keystone.txt
+++ b/Documentation/devicetree/bindings/pci/pci-keystone.txt
@@ -12,8 +12,10 @@ described here as well as properties that are not applicable.
Required Properties:-

compatibility: "ti,keystone-pcie"
-reg: index 1 is the base address and length of DW application registers.
- index 2 is the base address and length of PCI device ID register.
+reg: Three register ranges as listed in the reg-names property
+reg-names: "dbics" for the DesignWare PCIe registers, "app" for the
+ TI specific application registers, "config" for the
+ configuration space address

pcie_msi_intc : Interrupt controller device node for MSI IRQ chip
interrupt-cells: should be set to 1
--
2.17.1
\
 
 \ /
  Last update: 2019-01-14 14:26    [W:0.151 / U:10.940 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site