lkml.org 
[lkml]   [2019]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 14/15] PCI: designware-plat: Remove setting epc->features in Designware plat EP driver
Date
Now that pci-epf-test uses get_features callback and
dw_plat_pcie_epc_features in Designware plat EP driver already indicates
it doesn't support linkup notification and is MSIX capable, remove setting
epc->features which is not used anymore by the endpoint function driver.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/pci/controller/dwc/pcie-designware-plat.c | 4 ----
1 file changed, 4 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware-plat.c b/drivers/pci/controller/dwc/pcie-designware-plat.c
index bd0516afc86f..3be87126aef3 100644
--- a/drivers/pci/controller/dwc/pcie-designware-plat.c
+++ b/drivers/pci/controller/dwc/pcie-designware-plat.c
@@ -70,14 +70,10 @@ static const struct dw_pcie_ops dw_pcie_ops = {
static void dw_plat_pcie_ep_init(struct dw_pcie_ep *ep)
{
struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
- struct pci_epc *epc = ep->epc;
enum pci_barno bar;

for (bar = BAR_0; bar <= BAR_5; bar++)
dw_pcie_ep_reset_bar(pci, bar);
-
- epc->features |= EPC_FEATURE_NO_LINKUP_NOTIFIER;
- epc->features |= EPC_FEATURE_MSIX_AVAILABLE;
}

static int dw_plat_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
--
2.17.1
\
 
 \ /
  Last update: 2019-01-14 12:18    [W:2.144 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site