lkml.org 
[lkml]   [2019]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 5/5] psi: introduce psi monitor
On Thu, Jan 10, 2019 at 02:07:18PM -0800, Suren Baghdasaryan wrote:
> +/*
> + * psi_update_work represents slowpath accounting part while
> + * psi_group_change represents hotpath part.
> + * There are two potential races between these path:
> + * 1. Changes to group->polling when slowpath checks for new stall, then
> + * hotpath records new stall and then slowpath resets group->polling
> + * flag. This leads to the exit from the polling mode while monitored
> + * states are still changing.
> + * 2. Slowpath overwriting an immediate update scheduled from the hotpath
> + * with a regular update further in the future and missing the
> + * immediate update.
> + * Both races are handled with a retry cycle in the slowpath:
> + *
> + * HOTPATH: | SLOWPATH:
> + * |
> + * A) times[cpu] += delta | E) delta = times[*]
> + * B) start_poll = (delta[poll_mask] &&| if delta[poll_mask]:
> + * cmpxchg(g->polling, 0, 1) == 0)| F) polling_until = now +
> + * | grace_period
> + * | if now > polling_until:
> + * if start_poll: | if g->polling:
> + * C) mod_delayed_work(1) | G) g->polling = polling = 0
> + * else if !delayed_work_pending(): | H) goto SLOWPATH
> + * D) schedule_delayed_work(PSI_FREQ)| else:
> + * | if !g->polling:
> + * | I) g->polling = polling = 1
> + * | J) if delta && first_pass:
> + * | next_avg = calculate_averages()
> + * | if polling:
> + * | next_poll = poll_triggers()
> + * | if (delta && first_pass) || polling:
> + * | K) mod_delayed_work(
> + * | min(next_avg, next_poll))
> + * | if !polling:
> + * | first_pass = false
> + * | L) goto SLOWPATH
> + *
> + * Race #1 is represented by (EABGD) sequence in which case slowpath
> + * deactivates polling mode because it misses new monitored stall and hotpath
> + * doesn't activate it because at (B) g->polling is not yet reset by slowpath
> + * in (G). This race is handled by the (H) retry, which in the race described
> + * above results in the new sequence of (EABGDHEIK) that reactivates polling
> + * mode.
> + *
> + * Race #2 is represented by polling==false && (JABCK) sequence which
> + * overwrites immediate update scheduled at (C) with a later (next_avg) update
> + * scheduled at (K). This race is handled by the (L) retry which results in the
> + * new sequence of polling==false && (JABCKLEIK) that reactivates polling mode
> + * and reschedules next polling update (next_poll).
> + *
> + * Note that retries can't result in an infinite loop because retry #1 happens
> + * only during polling reactivation and retry #2 happens only on the first
> + * pass. Constant reactivations are impossible because polling will stay active
> + * for at least grace_period. Worst case scenario involves two retries (HEJKLE)
> + */

I'm having a fairly hard time with this. There's a distinct lack of
memory ordering, and a suspicious mixing of atomic ops (cmpxchg) and
regular loads and stores (without READ_ONCE/WRITE_ONCE even).

Please clarify.

(also, you look to have a whole bunch of line-breaks that are really not
needed; concattenated the line would not be over 80 chars).

\
 
 \ /
  Last update: 2019-01-14 11:22    [W:0.114 / U:0.496 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site