lkml.org 
[lkml]   [2019]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 1/2] ARCv2: LIB: memeset: fix doing prefetchw outside of buffer
Date
On 1/14/19 7:17 AM, Eugeniy Paltsev wrote:
> Current ARCv2 memeset implementation may call 'prefetchw'
> instruction for address which lies outside of memset area.
> So we got one modified (dirty) cache line outside of memset
> area. This may lead to data corruption if this area is used
> for DMA IO.
>
> Another issue is that current ARCv2 memeset implementation
> may call 'prealloc' instruction for L1 cache line which
> doesn't fully belongs to memeset area in case of 128B L1 D$
> line length. That leads to data corruption.
>
> Fix prefetchw/prealloc instructions using in case of 64B L1 data
> cache line (default case) and don't use prefetch* instructions
> for other possible L1 data cache line lengths (32B and 128B).
>
> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
> ---
> arch/arc/lib/memset-archs.S | 30 +++++++++++++++++++++++-------
> 1 file changed, 23 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arc/lib/memset-archs.S b/arch/arc/lib/memset-archs.S
> index 62ad4bcb841a..c7717832336f 100644
> --- a/arch/arc/lib/memset-archs.S
> +++ b/arch/arc/lib/memset-archs.S
> @@ -7,11 +7,32 @@
> */
>
> #include <linux/linkage.h>
> +#include <asm/cache.h>
>
> #undef PREALLOC_NOT_AVAIL
>
> +/*
> + * The memset implementation below is optimized to use prefetchw and prealloc
> + * instruction in case of CPU with 64B L1 data cache line (L1_CACHE_SHIFT == 6)
> + * If you want to implement optimized memset for other possible L1 data cache
> + * line lengths (32B and 128B) you should rewrite code carefully checking
> + * we don't call any prefetchw/prealloc instruction for L1 cache lines which
> + * don't belongs to memset area.

Good point. FWIW, it is possible to support those non common line lengths by using
L1_CACHE_SHIFT etc in asm code below but I agree its not worth the trouble.

> + */
> +#if L1_CACHE_SHIFT!=6
> +# define PREALLOC_INSTR(...)
> +# define PREFETCHW_INSTR(...)
> +#else /* L1_CACHE_SHIFT!=6 */
> +# define PREFETCHW_INSTR(...) prefetchw __VA_ARGS__
> +# ifdef PREALLOC_NOT_AVAIL
> +# define PREALLOC_INSTR(...) prefetchw __VA_ARGS__
> +# else
> +# define PREALLOC_INSTR(...) prealloc __VA_ARGS__
> +# endif
> +#endif /* L1_CACHE_SHIFT!=6 */
> +
> ENTRY_CFI(memset)
> - prefetchw [r0] ; Prefetch the write location
> + PREFETCHW_INSTR([r0]) ; Prefetch the first write location
> mov.f 0, r2
> ;;; if size is zero
> jz.d [blink]
> @@ -48,11 +69,7 @@ ENTRY_CFI(memset)
>
> lpnz @.Lset64bytes
> ;; LOOP START
> -#ifdef PREALLOC_NOT_AVAIL
> - prefetchw [r3, 64] ;Prefetch the next write location
> -#else
> - prealloc [r3, 64]
> -#endif
> + PREALLOC_INSTR([r3, 64]) ;Prefetch the next write location

These are not solving the issue - I'd break this up and move these bits to your
next patch.

> #ifdef CONFIG_ARC_HAS_LL64
> std.ab r4, [r3, 8]
> std.ab r4, [r3, 8]
> @@ -85,7 +102,6 @@ ENTRY_CFI(memset)
> lsr.f lp_count, r2, 5 ;Last remaining max 124 bytes
> lpnz .Lset32bytes
> ;; LOOP START
> - prefetchw [r3, 32] ;Prefetch the next write location

So the real fix for issue at hand is this line. I'll keep this for the fix and
beef up the changelog. Thing is existing code was already skipping the last 64B
from the main loop (thus avoided prefetching the next line), but then reintroduced
prefetchw is last 32B loop, spoiling the party. That prefetchw was pointless anyways

-Vineet

\
 
 \ /
  Last update: 2019-01-15 02:10    [W:0.055 / U:3.564 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site