lkml.org 
[lkml]   [2019]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] rtc: snvs: make sure clock is enabled for interrupt handle
Date
During system suspend, the SNVS RTC's clock will be disabled in
noirq suspend phase, but SNVS RTC's alarm interrupt could still
arrive, system will hang if SNVS RTC driver tries to access register
without clock enabled, this patch fixes the issue of this scenario.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
drivers/rtc/rtc-snvs.c | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/drivers/rtc/rtc-snvs.c b/drivers/rtc/rtc-snvs.c
index b2483a7..0b9eff1 100644
--- a/drivers/rtc/rtc-snvs.c
+++ b/drivers/rtc/rtc-snvs.c
@@ -239,6 +239,9 @@ static irqreturn_t snvs_rtc_irq_handler(int irq, void *dev_id)
u32 lpsr;
u32 events = 0;

+ if (data->clk)
+ clk_enable(data->clk);
+
regmap_read(data->regmap, data->offset + SNVS_LPSR, &lpsr);

if (lpsr & SNVS_LPSR_LPTA) {
@@ -253,6 +256,9 @@ static irqreturn_t snvs_rtc_irq_handler(int irq, void *dev_id)
/* clear interrupt status */
regmap_write(data->regmap, data->offset + SNVS_LPSR, lpsr);

+ if (data->clk)
+ clk_disable(data->clk);
+
return events ? IRQ_HANDLED : IRQ_NONE;
}

--
2.7.4
\
 
 \ /
  Last update: 2019-01-11 08:09    [W:0.038 / U:2.128 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site