lkml.org 
[lkml]   [2019]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] ARM64: dts: meson-gxbb-odroidc2: Fix usb phy regulator warning
From
Date
Hi Anand,

On 11/01/2019 10:22, Anand Moon wrote:
> Add missing vin-supply 5V regulator node on usb_phy nodes needed
> to power usb bus ports. Override the dr_mode from "host" to "peripheral"
> for initialization of dwc2 usb0 phy node,changes fix the below
> warning for usb initialization.

I would have switch the dr_mode to peripheral in another patch,
fix the regulator issue in this patch only.

Neil

>
> [ 1.203900] phy phy-c0000000.phy.0: USB ID detect failed!
> [ 1.208048] phy phy-c0000000.phy.0: phy poweron failed --> -22
> [ 1.213877] WARNING: CPU: 1 PID: 44 at drivers/regulator/core.c:2054 _regulator_put.part.11+0xf0/0xf8
> [ 1.222953] Modules linked in:
> [ 1.225976] CPU: 1 PID: 44 Comm: kworker/1:1 Not tainted 5.0.0-rc1-xc2ml #3
> [ 1.232872] Hardware name: Hardkernel ODROID-C2 (DT)
> [ 1.237794] Workqueue: events deferred_probe_work_func
> [ 1.242878] pstate: 80000005 (Nzcv daif -PAN -UAO)
> [ 1.247623] pc : _regulator_put.part.11+0xf0/0xf8
> [ 1.252280] lr : regulator_put+0x34/0x48
> [ 1.256159] sp : ffff00001176bb00
> [ 1.259437] x29: ffff00001176bb00 x28: 0000000000000000
> [ 1.264698] x27: ffff80007f31beb8 x26: ffff000010eeb7e0
> [ 1.269959] x25: 0000000000000000 x24: 0000000000000009
> [ 1.275220] x23: ffff00001176bbc8 x22: ffff80007ed9d500
> [ 1.280482] x21: ffff0000111bd6c8 x20: ffff80007ed9d700
> [ 1.285743] x19: ffff80007ed9d700 x18: 000000000000006f
> [ 1.291004] x17: 0000000000000000 x16: 0000000000000000
> [ 1.296265] x15: 0000000000000400 x14: 0000000000000400
> [ 1.301527] x13: ff00000000000000 x12: ffffffffffffffff
> [ 1.306788] x11: 0000000000000038 x10: 0000000000000040
> [ 1.312049] x9 : ffff0000111d58b0 x8 : ffff0000111d58a8
> [ 1.317310] x7 : ffff80007ed9db00 x6 : ffff80007ec21b00
> [ 1.322571] x5 : ffff80007f400248 x4 : ffff80007fba9b00
> [ 1.327833] x3 : ffff0000112d9eb8 x2 : ffff80007ec21b00
> [ 1.333094] x1 : 0000000000000000 x0 : 0000000000000001
> [ 1.338356] Call trace:
> [ 1.340773] _regulator_put.part.11+0xf0/0xf8
> [ 1.345085] regulator_put+0x34/0x48
> [ 1.348621] regulator_bulk_free+0x30/0x50
> [ 1.352675] devm_regulator_bulk_release+0x18/0x20
> [ 1.357421] release_nodes+0x1b0/0x220
> [ 1.361127] devres_release_all+0x34/0x50
> [ 1.365094] really_probe+0xec/0x290
> [ 1.368630] driver_probe_device+0x54/0xe8
> [ 1.372684] __device_attach_driver+0xb8/0xe8
> [ 1.376997] bus_for_each_drv+0x78/0xc8
> [ 1.380792] __device_attach+0xd4/0x130
> [ 1.384587] device_initial_probe+0x10/0x18
> [ 1.388727] bus_probe_device+0x90/0x98
> [ 1.392522] deferred_probe_work_func+0x6c/0xa0
> [ 1.397010] process_one_work+0x1e0/0x318
> [ 1.400975] worker_thread+0x228/0x428
> [ 1.404684] kthread+0x124/0x128
> [ 1.407876] ret_from_fork+0x10/0x18
> [ 1.411410] ---[ end trace de5fd1b262c1f56a ]---
> [ 1.416055] WARNING: CPU: 1 PID: 44 at drivers/regulator/core.c:2054 _regulator_put.part.11+0xf0/0xf8
> [ 1.425123] Modules linked in:
> [ 1.428144] CPU: 1 PID: 44 Comm: kworker/1:1 Tainted: G W 5.0.0-rc1-xc2ml #3
> [ 1.436422] Hardware name: Hardkernel ODROID-C2 (DT)
> [ 1.441340] Workqueue: events deferred_probe_work_func
>
> Fixes: 5a0803bd5ae (ARM64: dts: meson-gxbb-odroidc2: Enable USB Nodes)
> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> Cc: Jerome Brunet <jbrunet@baylibre.com>
> Cc: Neil Armstrong <narmstrong@baylibre.com>
> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
> ---
> Fix the following power issue with usb device
>
> [ 795.380156] usb 1-1.2: reset high-speed USB device number 3 using dwc2
> [ 798.356073] usb 1-1.2: reset high-speed USB device number 3 using dwc2
> [ 801.331999] usb 1-1.2: reset high-speed USB device number 3 using dwc2
> [ 804.307919] usb 1-1.2: reset high-speed USB device number 3 using dwc2
> [ 807.283844] usb 1-1.2: reset high-speed USB device number 3 using dwc2
>
> [alarm@archl-c2m ~]$ lsusb -t
> /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc2/1p, 480M
> |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
> |__ Port 1: Dev 4, If 0, Class=Mass Storage, Driver=usb-storage, 480M
> |__ Port 2: Dev 5, If 3, Class=Audio, Driver=, 480M
> |__ Port 2: Dev 5, If 1, Class=Video, Driver=uvcvideo, 480M
> |__ Port 2: Dev 5, If 2, Class=Audio, Driver=, 480M
> |__ Port 2: Dev 5, If 0, Class=Video, Driver=uvcvideo, 480M
> |__ Port 3: Dev 3, If 0, Class=Vendor Specific Class, Driver=, 480M
>
> Similar Fix is need for Odroid C1+ to power on the phy nodes
> ---
> arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> index 2e1cd5e3a246..b4e14ff614c4 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> @@ -28,6 +28,13 @@
> reg = <0x0 0x0 0x0 0x80000000>;
> };
>
> + p5v0: regulator-p5v0 {
> + compatible = "regulator-fixed";
> + regulator-name = "P5V0";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + };
> +
> usb_otg_pwr: regulator-usb-pwrs {
> compatible = "regulator-fixed";
>
> @@ -36,6 +43,8 @@
> regulator-min-microvolt = <5000000>;
> regulator-max-microvolt = <5000000>;
>
> + vin-supply = <&p5v0>;
> +
> gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
> enable-active-high;
> };
> @@ -303,6 +312,7 @@
>
> &usb0 {
> status = "okay";
> + dr_mode = "peripheral";
> };
>
> &usb1 {
>

\
 
 \ /
  Last update: 2019-01-11 14:41    [W:0.039 / U:8.624 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site