lkml.org 
[lkml]   [2019]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC v3 14/21] iommu: introduce device fault data
From
Date
On 10/01/2019 18:45, Jacob Pan wrote:
> On Tue, 8 Jan 2019 11:26:26 +0100
> Eric Auger <eric.auger@redhat.com> wrote:
>
>> From: Jacob Pan <jacob.jun.pan@linux.intel.com>
>>
>> Device faults detected by IOMMU can be reported outside IOMMU
>> subsystem for further processing. This patch intends to provide
>> a generic device fault data such that device drivers can be
>> communicated with IOMMU faults without model specific knowledge.
>>
>> The proposed format is the result of discussion at:
>> https://lkml.org/lkml/2017/11/10/291
>> Part of the code is based on Jean-Philippe Brucker's patchset
>> (https://patchwork.kernel.org/patch/9989315/).
>>
>> The assumption is that model specific IOMMU driver can filter and
>> handle most of the internal faults if the cause is within IOMMU driver
>> control. Therefore, the fault reasons can be reported are grouped
>> and generalized based common specifications such as PCI ATS.
>>
>> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
>> Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
>> Signed-off-by: Liu, Yi L <yi.l.liu@linux.intel.com>
>> Signed-off-by: Ashok Raj <ashok.raj@intel.com>
>> Signed-off-by: Eric Auger <eric.auger@redhat.com>
>> [moved part of the iommu_fault_event struct in the uapi, enriched
>> the fault reasons to be able to map unrecoverable SMMUv3 errors]
>> ---
>> include/linux/iommu.h | 55 ++++++++++++++++++++++++-
>> include/uapi/linux/iommu.h | 83
>> ++++++++++++++++++++++++++++++++++++++ 2 files changed, 136
>> insertions(+), 2 deletions(-)
>>
>> diff --git a/include/linux/iommu.h b/include/linux/iommu.h
>> index 244c1a3d5989..1dedc2d247c2 100644
>> --- a/include/linux/iommu.h
>> +++ b/include/linux/iommu.h
>> @@ -49,13 +49,17 @@ struct bus_type;
>> struct device;
>> struct iommu_domain;
>> struct notifier_block;
>> +struct iommu_fault_event;
>>
>> /* iommu fault flags */
>> -#define IOMMU_FAULT_READ 0x0
>> -#define IOMMU_FAULT_WRITE 0x1
>> +#define IOMMU_FAULT_READ (1 << 0)
>> +#define IOMMU_FAULT_WRITE (1 << 1)
>> +#define IOMMU_FAULT_EXEC (1 << 2)
>> +#define IOMMU_FAULT_PRIV (1 << 3)
>>
>> typedef int (*iommu_fault_handler_t)(struct iommu_domain *,
>> struct device *, unsigned long, int, void *);
>> +typedef int (*iommu_dev_fault_handler_t)(struct iommu_fault_event *,
>> void *);
>> struct iommu_domain_geometry {
>> dma_addr_t aperture_start; /* First address that can be
>> mapped */ @@ -255,6 +259,52 @@ struct iommu_device {
>> struct device *dev;
>> };
>>
>> +/**
>> + * struct iommu_fault_event - Generic per device fault data
>> + *
>> + * - PCI and non-PCI devices
>> + * - Recoverable faults (e.g. page request), information based on
>> PCI ATS
>> + * and PASID spec.
>> + * - Un-recoverable faults of device interest
>> + * - DMA remapping and IRQ remapping faults
>> + *
>> + * @fault: fault descriptor
>> + * @device_private: if present, uniquely identify device-specific
>> + * private data for an individual page request.
>> + * @iommu_private: used by the IOMMU driver for storing
>> fault-specific
>> + * data. Users should not modify this field before
>> + * sending the fault response.
>> + */
>> +struct iommu_fault_event {
>> + struct iommu_fault fault;
>> + u64 device_private;
> I think we want to move device_private to uapi since it gets injected
> into the guest, then returned by guest in case of page response. For
> VT-d we also need 128 bits of private data. VT-d spec. 7.7.1

Ah, I didn't notice the format changed in VT-d rev3. On that topic, how
do we manage future extensions to the iommu_fault struct? Should we add
~48 bytes of padding after device_private, along with some flags telling
which field is valid, or deal with it using a structure version like we
do for the invalidate and bind structs? In the first case, iommu_fault
wouldn't fit in a 64-byte cacheline anymore, but I'm not sure we care.

> For exception tracking (e.g. unanswered page request), I can add timer
> and list info later when I include PRQ. sounds ok?
>> + u64 iommu_private;
[...]
>> +/**
>> + * struct iommu_fault - Generic fault data
>> + *
>> + * @type contains fault type
>> + * @reason fault reasons if relevant outside IOMMU driver.
>> + * IOMMU driver internal faults are not reported.
>> + * @addr: tells the offending page address
>> + * @fetch_addr: tells the address that caused an abort, if any
>> + * @pasid: contains process address space ID, used in shared virtual
>> memory
>> + * @page_req_group_id: page request group index
>> + * @last_req: last request in a page request group
>> + * @pasid_valid: indicates if the PRQ has a valid PASID
>> + * @prot: page access protection flag:
>> + * IOMMU_FAULT_READ, IOMMU_FAULT_WRITE
>> + */
>> +
>> +struct iommu_fault {
>> + __u32 type; /* enum iommu_fault_type */
>> + __u32 reason; /* enum iommu_fault_reason */
>> + __u64 addr;
>> + __u64 fetch_addr;
>> + __u32 pasid;
>> + __u32 page_req_group_id;
>> + __u32 last_req;
>> + __u32 pasid_valid;
>> + __u32 prot;
>> + __u32 access;

What does @access contain? Can it be squashed into @prot?

Thanks,
Jean

> relocated to uapi, Yi can you confirm?
> __u64 device_private[2];
>
>> +};
>> #endif /* _UAPI_IOMMU_H */
>
> _______________________________________________
> iommu mailing list
> iommu@lists.linux-foundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/iommu
>

\
 
 \ /
  Last update: 2019-01-11 12:07    [W:0.153 / U:0.380 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site