lkml.org 
[lkml]   [2019]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v10 02/27] PM / Domains: Add support for CPU devices to genpd
Date
On Wednesday, December 19, 2018 11:02:05 AM CET Ulf Hansson wrote:
> On Wed, 19 Dec 2018 at 10:53, Daniel Lezcano <daniel.lezcano@linaro.org> wrote:
> >
> > On 29/11/2018 18:46, Ulf Hansson wrote:
> > > To enable a device belonging to a CPU to be attached to a PM domain managed
> > > by genpd, let's do a few changes to it, as to make it convenient to manage
> > > the specifics around CPUs.
> > >
> > > To be able to quickly find out what CPUs that are attached to a genpd,
> > > which typically becomes useful from a genpd governor as following changes
> > > is about to show, let's add a cpumask to the struct generic_pm_domain. At
> > > the point when a CPU device gets attached to a genpd, let's update its
> > > cpumask. Moreover, let's also propagate changes to the cpumask upwards in
> > > the topology to the master PM domains. In this way, the cpumask for a genpd
> > > hierarchically reflects all CPUs attached to the topology below it.
> > >
> > > Finally, let's make this an opt-in feature, to avoid having to manage CPUs
> > > and the cpumask for a genpd that doesn't need it. For that reason, let's
> > > add a new genpd configuration bit, GENPD_FLAG_CPU_DOMAIN.
> > >
> > > Cc: Lina Iyer <ilina@codeaurora.org>
> > > Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
> > > Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
> > > ---
> > >
> > > Changes in v10:
> > > - Don't allocate the cpumask when not used.
> > > - Simplify the code that updates the cpumask.
> > > - Document the GENPD_FLAG_CPU_DOMAIN.
> > >
> > > ---
> > > drivers/base/power/domain.c | 66 ++++++++++++++++++++++++++++++++++++-
> > > include/linux/pm_domain.h | 13 ++++++++
> > > 2 files changed, 78 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
> > > index e27b91d36a2a..c3ff8e395308 100644
> > > --- a/drivers/base/power/domain.c
> > > +++ b/drivers/base/power/domain.c
> > > @@ -20,6 +20,7 @@
> > > #include <linux/sched.h>
> > > #include <linux/suspend.h>
> > > #include <linux/export.h>
> > > +#include <linux/cpu.h>
> > >
> > > #include "power.h"
> > >
> > > @@ -126,6 +127,7 @@ static const struct genpd_lock_ops genpd_spin_ops = {
> > > #define genpd_is_irq_safe(genpd) (genpd->flags & GENPD_FLAG_IRQ_SAFE)
> > > #define genpd_is_always_on(genpd) (genpd->flags & GENPD_FLAG_ALWAYS_ON)
> > > #define genpd_is_active_wakeup(genpd) (genpd->flags & GENPD_FLAG_ACTIVE_WAKEUP)
> > > +#define genpd_is_cpu_domain(genpd) (genpd->flags & GENPD_FLAG_CPU_DOMAIN)
> > >
> > > static inline bool irq_safe_dev_in_no_sleep_domain(struct device *dev,
> > > const struct generic_pm_domain *genpd)
> > > @@ -1377,6 +1379,56 @@ static void genpd_free_dev_data(struct device *dev,
> > > dev_pm_put_subsys_data(dev);
> > > }
> > >
> > > +static void __genpd_update_cpumask(struct generic_pm_domain *genpd,
> > > + int cpu, bool set, unsigned int depth)
> > > +{
> > > + struct gpd_link *link;
> > > +
> > > + if (!genpd_is_cpu_domain(genpd))
> > > + return;
> >
> > With this test, we won't continue updating the cpumask for the other
> > masters. Is it done on purpose ?
>
> Correct, and yes it's on purpose.
>
> We are not even allocating the cpumask for the genpd in question,
> unless it has the GENPD_FLAG_CPU_DOMAIN set.

So this patch is generally fine by me. You can add my ACK to it when
submitting it again, unless it is changed, so I know I've seen it
already.

\
 
 \ /
  Last update: 2019-01-11 11:56    [W:0.081 / U:0.152 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site