lkml.org 
[lkml]   [2019]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/3] dt-bindings: iio: chemical: pms7003: add device tree support
On Sun, Jan 06, 2019 at 06:16:14PM +0100, Tomasz Duszynski wrote:
> Add device tree support for Plantower PMS7003 particulate matter sensor.
>
> Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
> ---
> .../bindings/iio/chemical/plantower,pms7003.txt | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt
> new file mode 100644
> index 000000000000..79eb538eb932
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt
> @@ -0,0 +1,14 @@
> +* Plantower PMS7003 particulate matter sensor
> +
> +Required properties:
> +- compatible: must be "plantower,pms7003"

Looks like this has reset and set GPIO lines as well as Vcc supply.
Bindings should be complete even if the driver or a platform doesn't use
some parts.

> +
> +Refer to serial/slave-device.txt for generic serial attached device bindings.
> +
> +Example:
> +
> +&uart@0 {
> + pms7003 {
> + compatible = "plantower,pms7003";
> + };
> +};
> --
> 2.20.1
>

\
 
 \ /
  Last update: 2019-01-11 23:16    [W:0.241 / U:0.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site