lkml.org 
[lkml]   [2019]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 4/4] dt-bindings: pinctrl: Add ZynqMP pin controller bindings
On Fri, Jan 04, 2019 at 01:56:22PM -0800, Jolly Shah wrote:
> From: Rajan Vaja <rajan.vaja@xilinx.com>
>
> Add documentation to describe Xilinx ZynqMP pin controller
> bindings.
>
> Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
> Signed-off-by: Jolly Shah <jollys@xilinx.com>
> ---
> .../bindings/pinctrl/xlnx,zynqmp-pinctrl.txt | 275 +++++++++++++++++++++
> 1 file changed, 275 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.txt
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.txt
> new file mode 100644
> index 0000000..acf44a5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.txt
> @@ -0,0 +1,275 @@
> + Binding for Xilinx ZynqMP Pinctrl
> +
> +Required properties:
> +- compatible: "xlnx,zynqmp-pinctrl"
> +
> +Please refer to pinctrl-bindings.txt in this directory for details of the
> +common pinctrl bindings used by client devices, including the meaning of the
> +phrase "pin configuration node".
> +
> +ZynqMP's pin configuration nodes act as a container for an arbitrary number of
> +subnodes. Each of these subnodes represents some desired configuration for a
> +pin, a group, or a list of pins or groups. This configuration can include the
> +mux function to select on those pin(s)/group(s), and various pin configuration
> +parameters, such as pull-up, slew rate, etc.
> +
> +Each configuration node can consist of multiple nodes describing the pinmux and
> +pinconf options. Those nodes can be pinmux nodes or pinconf nodes.
> +
> +The name of each subnode is not important; all subnodes should be enumerated
> +and processed purely based on their content.
> +
> +Required properties for pinmux nodes are:
> + - groups: A list of pinmux groups.
> + - function: The name of a pinmux function to activate for the specified set
> + of groups.
> +
> +Required properties for configuration nodes:
> +One of:
> + - pins: A list of pin names
> + - groups: A list of pinmux groups.
> +
> +The following generic properties as defined in pinctrl-bindings.txt are valid
> +to specify in a pinmux subnode:
> + groups, function
> +
> +The following generic properties as defined in pinctrl-bindings.txt are valid
> +to specify in a pinconf subnode:
> + groups, pins, bias-disable, bias-pull-up, bias-pull-down, slew-rate
> +
> + Valid arguments for 'slew-rate' are 'SLEW_RATE_SLOW' and 'SLEW_RATE_FAST' to
> + select between slow and fast respectively.
> +
> + Valid values for groups are:
> + ethernet0_0_grp, ethernet1_0_grp, ethernet2_0_grp,
> + ethernet3_0_grp, gemtsu0_0_grp, gemtsu0_1_grp,
> + gemtsu0_2_grp, mdio0_0_grp, mdio1_0_grp,
> + mdio1_1_grp, mdio2_0_grp, mdio3_0_grp,
> + qspi0_0_grp, qspi_ss_0_grp, qspi_fbclk_0_grp,
> + spi0_0_grp, spi0_ss_0_grp, spi0_ss_1_grp,
> + spi0_ss_2_grp, spi0_1_grp, spi0_ss_3_grp,
> + spi0_ss_4_grp, spi0_ss_5_grp, spi0_2_grp,
> + spi0_ss_6_grp, spi0_ss_7_grp, spi0_ss_8_grp,
> + spi0_3_grp, spi0_ss_9_grp, spi0_ss_10_grp,
> + spi0_ss_11_grp, spi0_4_grp, spi0_ss_12_grp,
> + spi0_ss_13_grp, spi0_ss_14_grp, spi0_5_grp,
> + spi0_ss_15_grp, spi0_ss_16_grp, spi0_ss_17_grp,
> + spi1_0_grp, spi1_ss_0_grp, spi1_ss_1_grp,
> + spi1_ss_2_grp, spi1_1_grp, spi1_ss_3_grp,
> + spi1_ss_4_grp, spi1_ss_5_grp, spi1_2_grp,
> + spi1_ss_6_grp, spi1_ss_7_grp, spi1_ss_8_grp,
> + spi1_3_grp, spi1_ss_9_grp, spi1_ss_10_grp,
> + spi1_ss_11_grp, spi1_4_grp, spi1_ss_12_grp,
> + spi1_ss_13_grp, spi1_ss_14_grp, spi1_5_grp,
> + spi1_ss_15_grp, spi1_ss_16_grp, spi1_ss_17_grp,
> + sdio0_0_grp, sdio0_1_grp, sdio0_2_grp,
> + sdio0_3_grp, sdio0_4_grp, sdio0_5_grp,
> + sdio0_6_grp, sdio0_7_grp, sdio0_8_grp,
> + sdio0_9_grp, sdio0_10_grp, sdio0_11_grp,
> + sdio0_12_grp, sdio0_13_grp, sdio0_14_grp,
> + sdio0_15_grp, sdio0_16_grp, sdio0_17_grp,
> + sdio0_18_grp, sdio0_19_grp, sdio0_20_grp,
> + sdio0_21_grp, sdio0_22_grp, sdio0_23_grp,
> + sdio0_24_grp, sdio0_25_grp, sdio0_26_grp,
> + sdio0_27_grp, sdio0_28_grp, sdio0_29_grp,
> + sdio0_30_grp, sdio0_31_grp, sdio0_32_grp,
> + sdio0_pc_0_grp, sdio0_cd_0_grp, sdio0_wp_0_grp,
> + sdio0_pc_1_grp, sdio0_cd_1_grp, sdio0_wp_1_grp,
> + sdio0_pc_2_grp, sdio0_cd_2_grp, sdio0_wp_2_grp,
> + sdio1_0_grp, sdio1_1_grp, sdio1_2_grp,
> + sdio1_3_grp, sdio1_4_grp, sdio1_5_grp,
> + sdio1_6_grp, sdio1_7_grp, sdio1_8_grp,
> + sdio1_9_grp, sdio1_10_grp, sdio1_11_grp,
> + sdio1_12_grp, sdio1_13_grp, sdio1_14_grp,
> + sdio1_15_grp, sdio1_pc_0_grp, sdio1_cd_0_grp,
> + sdio1_wp_0_grp, sdio1_pc_1_grp, sdio1_cd_1_grp,
> + sdio1_wp_1_grp, nand0_0_grp, nand0_ce_0_grp,
> + nand0_rb_0_grp, nand0_dqs_0_grp, nand0_ce_1_grp,
> + nand0_rb_1_grp, nand0_dqs_1_grp, can0_0_grp,
> + can0_1_grp, can0_2_grp, can0_3_grp,
> + can0_4_grp, can0_5_grp, can0_6_grp,
> + can0_7_grp, can0_8_grp, can0_9_grp,
> + can0_10_grp, can0_11_grp, can0_12_grp,
> + can0_13_grp, can0_14_grp, can0_15_grp,
> + can0_16_grp, can0_17_grp, can0_18_grp,
> + can1_0_grp, can1_1_grp, can1_2_grp,
> + can1_3_grp, can1_4_grp, can1_5_grp,
> + can1_6_grp, can1_7_grp, can1_8_grp,
> + can1_9_grp, can1_10_grp, can1_11_grp,
> + can1_12_grp, can1_13_grp, can1_14_grp,
> + can1_15_grp, can1_16_grp, can1_17_grp,
> + can1_18_grp, can1_19_grp, uart0_0_grp,
> + uart0_1_grp, uart0_2_grp, uart0_3_grp,
> + uart0_4_grp, uart0_5_grp, uart0_6_grp,
> + uart0_7_grp, uart0_8_grp, uart0_9_grp,
> + uart0_10_grp, uart0_11_grp, uart0_12_grp,
> + uart0_13_grp, uart0_14_grp, uart0_15_grp,
> + uart0_16_grp, uart0_17_grp, uart0_18_grp,
> + uart1_0_grp, uart1_1_grp, uart1_2_grp,
> + uart1_3_grp, uart1_4_grp, uart1_5_grp,
> + uart1_6_grp, uart1_7_grp, uart1_8_grp,
> + uart1_9_grp, uart1_10_grp, uart1_11_grp,
> + uart1_12_grp, uart1_13_grp, uart1_14_grp,
> + uart1_15_grp, uart1_16_grp, uart1_17_grp,
> + uart1_18_grp, i2c0_0_grp, i2c0_1_grp,
> + i2c0_2_grp, i2c0_3_grp, i2c0_4_grp,
> + i2c0_5_grp, i2c0_6_grp, i2c0_7_grp,
> + i2c0_8_grp, i2c0_9_grp, i2c0_10_grp,
> + i2c0_11_grp, i2c0_12_grp, i2c0_13_grp,
> + i2c0_14_grp, i2c0_15_grp, i2c0_16_grp,
> + i2c0_17_grp, i2c0_18_grp, i2c1_0_grp,
> + i2c1_1_grp, i2c1_2_grp, i2c1_3_grp,
> + i2c1_4_grp, i2c1_5_grp, i2c1_6_grp,
> + i2c1_7_grp, i2c1_8_grp, i2c1_9_grp,
> + i2c1_10_grp, i2c1_11_grp, i2c1_12_grp,
> + i2c1_13_grp, i2c1_14_grp, i2c1_15_grp,
> + i2c1_16_grp, i2c1_17_grp, i2c1_18_grp,
> + i2c1_19_grp, ttc0_clk_0_grp, ttc0_wav_0_grp,
> + ttc0_clk_1_grp, ttc0_wav_1_grp, ttc0_clk_2_grp,
> + ttc0_wav_2_grp, ttc0_clk_3_grp, ttc0_wav_3_grp,
> + ttc0_clk_4_grp, ttc0_wav_4_grp, ttc0_clk_5_grp,
> + ttc0_wav_5_grp, ttc0_clk_6_grp, ttc0_wav_6_grp,
> + ttc0_clk_7_grp, ttc0_wav_7_grp, ttc0_clk_8_grp,
> + ttc0_wav_8_grp, ttc1_clk_0_grp, ttc1_wav_0_grp,
> + ttc1_clk_1_grp, ttc1_wav_1_grp, ttc1_clk_2_grp,
> + ttc1_wav_2_grp, ttc1_clk_3_grp, ttc1_wav_3_grp,
> + ttc1_clk_4_grp, ttc1_wav_4_grp, ttc1_clk_5_grp,
> + ttc1_wav_5_grp, ttc1_clk_6_grp, ttc1_wav_6_grp,
> + ttc1_clk_7_grp, ttc1_wav_7_grp, ttc1_clk_8_grp,
> + ttc1_wav_8_grp, ttc2_clk_0_grp, ttc2_wav_0_grp,
> + ttc2_clk_1_grp, ttc2_wav_1_grp, ttc2_clk_2_grp,
> + ttc2_wav_2_grp, ttc2_clk_3_grp, ttc2_wav_3_grp,
> + ttc2_clk_4_grp, ttc2_wav_4_grp, ttc2_clk_5_grp,
> + ttc2_wav_5_grp, ttc2_clk_6_grp, ttc2_wav_6_grp,
> + ttc2_clk_7_grp, ttc2_wav_7_grp, ttc2_clk_8_grp,
> + ttc2_wav_8_grp, ttc3_clk_0_grp, ttc3_wav_0_grp,
> + ttc3_clk_1_grp, ttc3_wav_1_grp, ttc3_clk_2_grp,
> + ttc3_wav_2_grp, ttc3_clk_3_grp, ttc3_wav_3_grp,
> + ttc3_clk_4_grp, ttc3_wav_4_grp, ttc3_clk_5_grp,
> + ttc3_wav_5_grp, ttc3_clk_6_grp, ttc3_wav_6_grp,
> + ttc3_clk_7_grp, ttc3_wav_7_grp, ttc3_clk_8_grp,
> + ttc3_wav_8_grp, swdt0_clk_0_grp, swdt0_rst_0_grp,
> + swdt0_clk_1_grp, swdt0_rst_1_grp, swdt0_clk_2_grp,
> + swdt0_rst_2_grp, swdt0_clk_3_grp, swdt0_rst_3_grp,
> + swdt0_clk_4_grp, swdt0_rst_4_grp, swdt0_clk_5_grp,
> + swdt0_rst_5_grp, swdt0_clk_6_grp, swdt0_rst_6_grp,
> + swdt0_clk_7_grp, swdt0_rst_7_grp, swdt0_clk_8_grp,
> + swdt0_rst_8_grp, swdt0_clk_9_grp, swdt0_rst_9_grp,
> + swdt0_clk_10_grp, swdt0_rst_10_grp, swdt0_clk_11_grp,
> + swdt0_rst_11_grp, swdt0_clk_12_grp, swdt0_rst_12_grp,
> + swdt1_clk_0_grp, swdt1_rst_0_grp, swdt1_clk_1_grp,
> + swdt1_rst_1_grp, swdt1_clk_2_grp, swdt1_rst_2_grp,
> + swdt1_clk_3_grp, swdt1_rst_3_grp, swdt1_clk_4_grp,
> + swdt1_rst_4_grp, swdt1_clk_5_grp, swdt1_rst_5_grp,
> + swdt1_clk_6_grp, swdt1_rst_6_grp, swdt1_clk_7_grp,
> + swdt1_rst_7_grp, swdt1_clk_8_grp, swdt1_rst_8_grp,
> + swdt1_clk_9_grp, swdt1_rst_9_grp, swdt1_clk_10_grp,
> + swdt1_rst_10_grp, swdt1_clk_11_grp, swdt1_rst_11_grp,
> + swdt1_clk_12_grp, swdt1_rst_12_grp, gpio0_0_grp,
> + gpio0_1_grp, gpio0_2_grp, gpio0_3_grp,
> + gpio0_4_grp, gpio0_5_grp, gpio0_6_grp,
> + gpio0_7_grp, gpio0_8_grp, gpio0_9_grp,
> + gpio0_10_grp, gpio0_11_grp, gpio0_12_grp,
> + gpio0_13_grp, gpio0_14_grp, gpio0_15_grp,
> + gpio0_16_grp, gpio0_17_grp, gpio0_18_grp,
> + gpio0_19_grp, gpio0_20_grp, gpio0_21_grp,
> + gpio0_22_grp, gpio0_23_grp, gpio0_24_grp,
> + gpio0_25_grp, gpio0_26_grp, gpio0_27_grp,
> + gpio0_28_grp, gpio0_29_grp, gpio0_30_grp,
> + gpio0_31_grp, gpio0_32_grp, gpio0_33_grp,
> + gpio0_34_grp, gpio0_35_grp, gpio0_36_grp,
> + gpio0_37_grp, gpio0_38_grp, gpio0_39_grp,
> + gpio0_40_grp, gpio0_41_grp, gpio0_42_grp,
> + gpio0_43_grp, gpio0_44_grp, gpio0_45_grp,
> + gpio0_46_grp, gpio0_47_grp, gpio0_48_grp,
> + gpio0_49_grp, gpio0_50_grp, gpio0_51_grp,
> + gpio0_52_grp, gpio0_53_grp, gpio0_54_grp,
> + gpio0_55_grp, gpio0_56_grp, gpio0_57_grp,
> + gpio0_58_grp, gpio0_59_grp, gpio0_60_grp,
> + gpio0_61_grp, gpio0_62_grp, gpio0_63_grp,
> + gpio0_64_grp, gpio0_65_grp, gpio0_66_grp,
> + gpio0_67_grp, gpio0_68_grp, gpio0_69_grp,
> + gpio0_70_grp, gpio0_71_grp, gpio0_72_grp,
> + gpio0_73_grp, gpio0_74_grp, gpio0_75_grp,
> + gpio0_76_grp, gpio0_77_grp, usb0_0_grp,
> + usb1_0_grp, pmu0_0_grp, pmu0_1_grp,
> + pmu0_2_grp, pmu0_3_grp, pmu0_4_grp,
> + pmu0_5_grp, pmu0_6_grp, pmu0_7_grp,
> + pmu0_8_grp, pmu0_9_grp, pmu0_10_grp,
> + pmu0_11_grp, pcie0_0_grp, pcie0_1_grp,
> + pcie0_2_grp, pcie0_3_grp, pcie0_4_grp,
> + pcie0_5_grp, pcie0_6_grp, pcie0_7_grp,
> + csu0_0_grp, csu0_1_grp, csu0_2_grp,
> + csu0_3_grp, csu0_4_grp, csu0_5_grp,
> + csu0_6_grp, csu0_7_grp, csu0_8_grp,
> + csu0_9_grp, csu0_10_grp, csu0_11_grp,
> + dpaux0_0_grp, dpaux0_1_grp, dpaux0_2_grp,
> + dpaux0_3_grp, pjtag0_0_grp, pjtag0_1_grp,
> + pjtag0_2_grp, pjtag0_3_grp, pjtag0_4_grp,
> + pjtag0_5_grp, trace0_0_grp, trace0_clk_0_grp,
> + trace0_1_grp, trace0_clk_1_grp, trace0_2_grp,
> + trace0_clk_2_grp, testscan0_0_grp
> +
> + Valid values for pins are:
> + MIO0 - MIO77
> +
> + Valid values for function are:
> + ethernet0, ethernet1, ethernet2, ethernet3, gemtsu0, usb0, usb1, mdio0,
> + mdio1, mdio2, mdio3, qspi0, qspi_fbclk, qspi_ss, spi0, spi1, spi0_ss,
> + spi1_ss, sdio0, sdio0_pc, sdio0_wp, sdio0_cd, sdio1, sdio1_pc, sdio1_wp,
> + sdio1_cd, nand0, nand0_ce, nand0_rb, nand0_dqs, can0, can1, uart0, uart1,
> + i2c0, i2c1, ttc0_clk, ttc0_wav, ttc1_clk, ttc1_wav, ttc2_clk, ttc2_wav,
> + ttc3_clk, ttc3_wav, swdt0_clk, swdt0_rst, swdt1_clk, swdt1_rst, gpio0, pmu0,
> + pcie0, csu0, dpaux0, pjtag0, trace0, trace0_clk, testscan0
> +
> +The following driver-specific properties as defined here are valid to specify in
> +a pin configuration subnode:
> + - io-standard: Configure the pin to use the selected IO standard. Valid
> + arguments are 'IO_STANDARD_LVCMOS33' and 'IO_STANDARD_LVCMOS18'.
> + - schmitt-cmos: Selects either Schmitt or CMOS input for MIO pins. Valid
> + arguments are 'PIN_INPUT_TYPE_SCHMITT' and 'PIN_INPUT_TYPE_CMOS'.
> +
> +Example:
> +
> +firmware {
> + zynqmp_firmware: zynqmp-firmware {
> + compatible = "xlnx,zynqmp-firmware";
> + method = "smc";
> +
> + pinctrl0: pinctrl@ff180000 {

The address here should be dropped.

Otherwise, looks fine.

Reviewed-by: Rob Herring <robh@kernel.org>

> + compatible = "xlnx,zynqmp-pinctrl";
> +
> + pinctrl_uart1_default: uart1-default {
> + mux {
> + groups = "uart0_4_grp";
> + function = "uart0";
> + };
> +
> + conf {
> + groups = "uart0_4_grp";
> + slew-rate = <SLEW_RATE_SLOW>;
> + io-standard = <IO_STANDARD_LVCMOS18>;
> + };
> +
> + conf-rx {
> + pins = "MIO18";
> + bias-high-impedance;
> + };
> +
> + conf-tx {
> + pins = "MIO19";
> + bias-disable;
> + schmitt-cmos = <PIN_INPUT_TYPE_CMOS>;
> + };
> + };
> + };
> + };
> +};
> +
> +uart1 {
> + ...
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1_default>;
> + ...
> +
> +};
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2019-01-11 21:09    [W:0.049 / U:5.128 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site