lkml.org 
[lkml]   [2019]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 4/4] PCI: imx6: Add support for i.MX8MQ
On Fri, Jan 04, 2019 at 08:53:35AM -0800, Andrey Smirnov wrote:
> Add code needed to support i.MX8MQ variant.
>
> Cc: Bjorn Helgaas <bhelgaas@google.com>
> Cc: Fabio Estevam <fabio.estevam@nxp.com>
> Cc: Chris Healy <cphealy@gmail.com>
> Cc: Lucas Stach <l.stach@pengutronix.de>
> Cc: Leonard Crestez <leonard.crestez@nxp.com>
> Cc: "A.s. Dong" <aisheng.dong@nxp.com>
> Cc: Richard Zhu <hongxing.zhu@nxp.com>
> Cc: Rob Herring <robh@kernel.org>,
> Cc: devicetree@vger.kernel.org,
> Cc: linux-imx@nxp.com
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> Cc: linux-pci@vger.kernel.org
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> ---
> .../bindings/pci/fsl,imx6q-pcie.txt | 3 +-
> drivers/pci/controller/dwc/Kconfig | 4 +-
> drivers/pci/controller/dwc/pci-imx6.c | 77 ++++++++++++++++++-
> 3 files changed, 79 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> index d514c1f2365f..920ca93870a8 100644
> --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> @@ -9,6 +9,7 @@ Required properties:
> - "fsl,imx6sx-pcie",
> - "fsl,imx6qp-pcie"
> - "fsl,imx7d-pcie"
> + - "fsl,imx8mq-pcie"
> - reg: base address and length of the PCIe controller
> - interrupts: A list of interrupt outputs of the controller. Must contain an
> entry for each entry in the interrupt-names property.
> @@ -45,7 +46,7 @@ Additional required properties for imx6sx-pcie:
> PCIE_PHY power domains
> - power-domain-names: Must be "pcie", "pcie_phy"
>
> -Additional required properties for imx7d-pcie:
> +Additional required properties for imx7d-pcie and imx8mq-pcie:
> - power-domains: Must be set to a phandle pointing to PCIE_PHY power domain
> - resets: Must contain phandles to PCIe-related reset lines exposed by SRC
> IP block
> diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
> index 6aafec3fad00..83ea318ad989 100644
> --- a/drivers/pci/controller/dwc/Kconfig
> +++ b/drivers/pci/controller/dwc/Kconfig
> @@ -89,8 +89,8 @@ config PCI_EXYNOS
> select PCIE_DW_HOST
>
> config PCI_IMX6
> - bool "Freescale i.MX6/7 PCIe controller"
> - depends on SOC_IMX6Q || SOC_IMX7D || (ARM && COMPILE_TEST)
> + bool "Freescale i.MX6/7/8 PCIe controller"
> + depends on SOC_IMX6Q || SOC_IMX7D || (ARM64 && ARCH_MXC) || ((ARM || ARM64) && COMPILE_TEST)

Since you added the ifdef around the abort handler, I think you can drop
"(ARM || ARM64)" and enable building other arches.

Rob

\
 
 \ /
  Last update: 2019-01-11 20:54    [W:0.075 / U:3.192 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site