lkml.org 
[lkml]   [2019]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 13/17] ARM: davinci: dm355: switch to using the clocksource driver
Date
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We now have a proper clocksource driver for davinci. Switch the platform
to using it.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
arch/arm/mach-davinci/dm355.c | 36 ++++++++++++++++++++++-------------
1 file changed, 23 insertions(+), 13 deletions(-)

diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 07ad9d6c9cae..2fd1186ceef6 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -29,7 +29,8 @@
#include <mach/irqs.h>
#include <mach/mux.h>
#include <mach/serial.h>
-#include <mach/time.h>
+
+#include <clocksource/timer-davinci.h>

#include "asp.h"
#include "davinci.h"
@@ -617,16 +618,24 @@ static struct davinci_id dm355_ids[] = {
},
};

-/*
- * T0_BOT: Timer 0, bottom: clockevent source for hrtimers
- * T0_TOP: Timer 0, top : clocksource for generic timekeeping
- * T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code)
- * T1_TOP: Timer 1, top : <unused>
- */
-static struct davinci_timer_info dm355_timer_info = {
- .timers = davinci_timer_instance,
- .clockevent_id = T0_BOT,
- .clocksource_id = T0_TOP,
+static const struct davinci_timer_cfg dm355_timer_cfg = {
+ .reg = {
+ .start = DAVINCI_TIMER0_BASE,
+ .end = DAVINCI_TIMER0_BASE + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = {
+ {
+ .start = IRQ_TINT0_TINT12,
+ .end = IRQ_TINT0_TINT12,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_TINT0_TINT34,
+ .end = IRQ_TINT0_TINT34,
+ .flags = IORESOURCE_IRQ,
+ }
+ }
};

static struct plat_serial8250_port dm355_serial0_platform_data[] = {
@@ -708,7 +717,6 @@ static const struct davinci_soc_info davinci_soc_info_dm355 = {
.intc_type = DAVINCI_INTC_TYPE_AINTC,
.intc_irq_prios = dm355_default_priorities,
.intc_irq_num = DAVINCI_N_AINTC_IRQ,
- .timer_info = &dm355_timer_info,
.sram_dma = 0x00010000,
.sram_len = SZ_32K,
};
@@ -735,6 +743,7 @@ void __init dm355_init_time(void)
{
void __iomem *pll1, *psc;
struct clk *clk;
+ int rv;

clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DM355_REF_FREQ);

@@ -747,7 +756,8 @@ void __init dm355_init_time(void)
clk = clk_get(NULL, "timer0");
WARN(IS_ERR(clk), "Unable to get the timer clock\n");

- davinci_timer_init(clk);
+ rv = davinci_timer_register(clk, &dm355_timer_cfg);
+ WARN(rv, "Unable to register the timer: %d\n", rv);
}

static struct resource dm355_pll2_resources[] = {
--
2.19.1
\
 
 \ /
  Last update: 2019-01-11 18:23    [W:0.201 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site