lkml.org 
[lkml]   [2019]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v4 2/9] dt/bindings: drm/komeda: Add DT bindings for ARM display processor D71
On Thu, Jan 03, 2019 at 11:40:04AM +0000, james qian wang (Arm Technology China) wrote:
> From: "james qian wang (Arm Technology China)" <james.qian.wang@arm.com>
>
> Add DT bindings documentation for the ARM display processor D71 and later
> IPs.
>
> Changes in v4:
> - Deleted unnecessary address-cells, size-cells [Liviu Dudau]
>
> Changes in v3:
> - Deleted unnecessary property: interrupt-names.
> - Dropped 'ports' and moving 'port' up a level.
>
> Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
> ---
> .../bindings/display/arm/arm,komeda.txt | 73 +++++++++++++++++++
> 1 file changed, 73 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/arm/arm,komeda.txt
>
> diff --git a/Documentation/devicetree/bindings/display/arm/arm,komeda.txt b/Documentation/devicetree/bindings/display/arm/arm,komeda.txt
> new file mode 100644
> index 000000000000..919d651d3e8c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/arm/arm,komeda.txt
> @@ -0,0 +1,73 @@
> +Device Tree bindings for Arm Komeda display driver
> +
> +Required properties:
> +- compatible: Should be "arm,mali-d71"
> +- reg: Physical base address and length of the registers in the system
> +- interrupts: the interrupt line number of the device in the system
> +- clocks: A list of phandle + clock-specifier pairs, one for each entry
> + in 'clock-names'
> +- clock-names: A list of clock names. It should contain:
> + - "mclk": for the main processor clock
> + - "pclk": for the APB interface clock
> +- #address-cells: Must be 1
> +- #size-cells: Must be 0
> +
> +Required properties for sub-node: pipeline@nq
> +Each device contains one or two pipeline sub-nodes (at least one), each
> +pipeline node should provide properties:
> +- reg: Zero-indexed identifier for the pipeline
> +- clocks: A list of phandle + clock-specifier pairs, one for each entry
> + in 'clock-names'
> +- clock-names: should contain:
> + - "pxclk": pixel clock
> + - "aclk": AXI interface clock
> +
> +- port: each pipeline connect to an encoder input port. The connection is
> + modeled using the OF graph bindings specified in
> + Documentation/devicetree/bindings/graph.txt
> +
> +Optional properties:
> + - memory-region: phandle to a node describing memory (see
> + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
> + to be used for the framebuffer; if not present, the framebuffer may
> + be located anywhere in memory.
> +
> +Example:
> +/ {
> + ...
> +
> + dp0: display@c00000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "arm,mali-d71";
> + reg = <0xc00000 0x20000>;
> + interrupts = <0 168 4>;
> + clocks = <&dpu_mclk>, <&dpu_aclk>;
> + clock-names = "mclk", "pclk";
> +
> + dp0_pipe0: pipeline@0 {
> + clocks = <&fpgaosc2>, <&dpu_aclk>;
> + clock-names = "pxclk", "aclk";
> + reg = <0>;
> +
> + port@0 {
Drop the '@0'

> + dp0_pipe0_out: endpoint {
> + remote-endpoint = <&db_dvi0_in>;
> + };
> + };
> + };
> +
> + dp0_pipe1: pipeline@1 {
> + clocks = <&fpgaosc2>, <&dpu_aclk>;
> + clock-names = "pxclk", "aclk";
> + reg = <1>;
> +
> + port@0 {

And here.

With that,

Reviewed-by: Rob Herring <robh@kernel.org>

> + dp0_pipe1_out: endpoint {
> + remote-endpoint = <&db_dvi1_in>;
> + };
> + };
> + };
> + };
> + ...
> +};
> --
> 2.17.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

\
 
 \ /
  Last update: 2019-01-11 17:17    [W:0.069 / U:20.368 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site