lkml.org 
[lkml]   [2019]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/2] dt-bindings: rtc: Add bindings for Cadence RTC
Date
This patch adds a DT binding documentation for
Cadence RTC controller.

Signed-off-by: Jan Kotas <jank@cadence.com>
---
Documentation/devicetree/bindings/rtc/cdns,rtc.txt | 25 ++++++++++++++++++++++
1 file changed, 25 insertions(+)
create mode 100644 Documentation/devicetree/bindings/rtc/cdns,rtc.txt

diff --git a/Documentation/devicetree/bindings/rtc/cdns,rtc.txt b/Documentation/devicetree/bindings/rtc/cdns,rtc.txt
new file mode 100644
index 000000000..40713bbbe
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/cdns,rtc.txt
@@ -0,0 +1,25 @@
+Cadence Real Time Clock
+
+The Cadence RTC controller with date, time and alarm capabilities.
+The alarm may wake the system from low-power state.
+
+Required properties:
+- compatible: Should be "cdns,rtc-r109v3"
+- reg: Specifies base physical address and size of the register area.
+- interrupts: A single interrupt specifier.
+- clocks: Must contain two entries:
+ - pclk: APB registers clock
+ - ref_clk: reference 1Hz of 100Hz clock, depending on IP configuration
+ See ../clocks/clock-bindings.txt for details.
+
+Example:
+ rtc0: rtc@fd080000 {
+ compatible = "cdns,rtc-r109v3";
+ reg = <0xfd080000 0x1000>;
+
+ clock-names = "pclk", "ref_clk";
+ clocks = <&sysclock>, <&refclock>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+ };
--
2.15.0
\
 
 \ /
  Last update: 2019-01-11 16:15    [W:0.068 / U:6.248 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site