lkml.org 
[lkml]   [2019]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv3 07/13] node: Add heterogenous memory access attributes
On Thu, Jan 10, 2019 at 06:07:02PM +0530, Aneesh Kumar K.V wrote:
> Keith Busch <keith.busch@intel.com> writes:
>
> > Heterogeneous memory systems provide memory nodes with different latency
> > and bandwidth performance attributes. Provide a new kernel interface for
> > subsystems to register the attributes under the memory target node's
> > initiator access class. If the system provides this information, applications
> > may query these attributes when deciding which node to request memory.
> >
> > The following example shows the new sysfs hierarchy for a node exporting
> > performance attributes:
> >
> > # tree -P "read*|write*" /sys/devices/system/node/nodeY/classZ/
> > /sys/devices/system/node/nodeY/classZ/
> > |-- read_bandwidth
> > |-- read_latency
> > |-- write_bandwidth
> > `-- write_latency
> >
> > The bandwidth is exported as MB/s and latency is reported in nanoseconds.
> > Memory accesses from an initiator node that is not one of the memory's
> > class "Z" initiator nodes may encounter different performance than
> > reported here. When a subsystem makes use of this interface, initiators
> > of a lower class number, "Z", have better performance relative to higher
> > class numbers. When provided, class 0 is the highest performing access
> > class.
>
> How does the definition of performance relate to bandwidth and latency here?. The
> initiator in this class has the least latency and high bandwidth? Can there
> be a scenario where both are not best for the same node? ie, for a
> target Node Y, initiator Node A gives the highest bandwidth but initiator
> Node B gets the least latency. How such a config can be represented? Or is
> that not possible?

I am not aware of a real platform that has an initiator-target pair with
better latency but worse bandwidth than any different initiator paired to
the same target. If such a thing exists and a subsystem wants to report
that, you can register any arbitrary number of groups or classes and
rank them according to how you want them presented.

\
 
 \ /
  Last update: 2019-01-10 18:33    [W:0.292 / U:0.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site