lkml.org 
[lkml]   [2019]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC RESEND PATCH] kvm: arm64: export memory error recovery capability to user space
From
Date
Hi James/Peter,
thanks for this discussion, and sorry for my late response due to vacation.

On 2018/12/22 2:17, James Morse wrote:
> Hi Peter,
>
> On 19/12/2018 19:02, Peter Maydell wrote:
>> On Mon, 17 Dec 2018 at 15:56, James Morse <james.morse@arm.com> wrote:
>>> I don't think this really matters. Its only the NMIlike notifications that the
>>> guest doesn't have to register or poll. The ones we support today extend the
>>> architectures existing behaviour: you would have taken an external-abort on a
>>> real system, whether you know about the additional metadata doesn't matter to Qemu.
>>
>> Consider the case where we booted the guest using a DTB and no ACPI
>> table at all -- we certainly can't just call QEMU code that tries to
>> add entries to a nonexistent table.
>
> Sure, because you know which of the two sets of firmware-table you're providing.
>
> I'm taking the behaviour of physical machines as the template for what we should
> do here. I can boot a DT-only kernel on Seattle. Firmware has no idea I did
> this, it will still take DRAM uncorrected-error IRQs in firmware, and generate
> CPER records in the POLLed areas. But the kernel will never look, because it
> booted with DT.
> What happens if the kernel goes on to access the corrupt location? It either
> gets corrupt values back, or an external abort, depending on the design of the
> memory-controller.
>
> X-gene uses an IRQ for its firmware-first notification. Booted with DT that
> interrupt can be asserted, but as the OS has didn't know to register it, its
> never taken. We eventually get the same corrupt-values/external-abort behaviour.
>
> KVM/Linux is acting as the memory controller using stage2. When an error is
> detected by the host it unmaps the page from stage2, and refuses to map it again
> until its fixed up in Qemu's memory map (which can happen automatically). If the
> kernel can't fix it itself, the AO signal is like the DRAM-IRQ above, and the AR
> like the external abort.
> We don't have a parallel to the 'gets corrupt values back' behaviour as Linux
> will always unmap hwpoison pages from user-space/guests.
>
> If the host-kernel wasn't build with CONFIG_MEMORY_FAILURE, its like the memory
> controller doesn't support any of the above. I think knowing this is the closest
> to what you want.
>
>
>> My main point is that there
>> needs to be logic in Dongjiu's QEMU patches that checks more than
>> just "does this KVM feature exist". I'm not sufficiently familiar
>> with all this RAS stuff to be certain what those checks should
>> be and what the right choices are; I just know we need to check
>> *something*...
>
> I think this is the crux of where we don't see this the same way.
> The v8.2 RAS stuff is new, RAS support on arm64 is not. Kernel support arrived
> at roughly the same time, but not CPU support. There are v8.0 systems that
> support RAS. There are DT systems that can do the same with edac drivers.
> The physical v8.0 systems that do this, are doing it without any extra CPU support.
>
> I think x86's behaviour here includes some history, which we don't have.
>>From the order of the HEST entries, it looks like the machine-check stuff came
> first, then firmware-first using a 'GHES' entry in that table.
> I think Qemu on x86 only supports the emulated machine check stuff, so it needs
> to check KVM has the widget to do this.
> If Qemu on x86 supported firmware-first, I don't think there would be anything
> to check. (details below)

Peter, I summarize James's main idea, James think QEMU does not needs to check *something* if Qemu support firmware-first.
What do we do for your comments?

>
>
>>>> Let us see the X86's QEMU logic:
>>>> 1. Before the vCPU created, it will set a default env->mcg_cap value with
>>>
>>>> MCE_CAP_DEF flag, MCG_SER_P means it expected the guest CPU model supports
>>>> RAS error recovery.[1] 2. when the vCPU initialize, it will check whether host
>>>> kernel support this feature[2]. Only when host kernel and default env->mcg_cap
>>>> value all expected this feature, then it will setup vCPU support RAS error
>>>> recovery[3].
>>>
>>> This looks like KVM exposing a CPU capability to Qemu, which then configures the
>>> behaviour KVM gives to the guest. This doesn't tell you anything about what the
>>> guest supports.
>>
>> It tells you what the *guest CPU* supports, which for x86 is a combination
>> of (a) what did the user/machine model ask for and (b) what can KVM
>> actually implement. I don't much care whether the guest OS supports
>> anything or not, that's its business... but it does seem odd to me
>> that the equivalent Arm code is not similarly saying "what were we
>> asked for, and what can we do?".
>
> The flow is something like:
> For AO, generate CPER records, and notify the OS via NOTIFY_POLL (which isn't
> really a notification) or some flavour of IRQ.
> To do this, Qemu needs to be able to write to its reserved area of guest memory,
> and possibly trigger an interrupt.
>
> For AR, generate CPER records and notify the OS via external abort. (the
> presence of the CPER records makes this NOTIFY_SEA or NOTIFY_SEI).
> To do this, Qemu again needs to be able to write to guest memory, set guest
> registers (KVM_SET_ONE_REG()). If it wants to inject an
> SError-Interrupt/Asynchronous-external-abort while the guest has it masked, it
> needs KVM_SET_VCPU_EVENTS().
>
> Nothing here depends on the CPU or kernel configuration. This is all ACPI stuff,
> so its the same on x86. (The only difference is external-abort becomes NMI,
> which is probably done through SET_VCPU_EVENTS())
>
> What were we asked for? Qemu wants to know if it can write to guest memory,
> guest registers (for synchronous external abort) and trigger interrupts. It has
> always been able to do these things.
>
>
>> I think one question here which it would be good to answer is:
>> if we are modelling a guest and we haven't specifically provided
>> it an ACPI table to tell it about memory errors, what do we do
>> when we get a sigbus from the host? We have basically two choices:
>> (1) send the guest an SError (aka asynchronous external abort)
>> anyway (with no further info about what the memory error is)
>
> For an AR signal an external abort is valid. Its up to the implementation
> whether these are synchronous or asynchronous. Qemu can only take a signal for
> something that was synchronous, so you can choose between the two.
> Synchronous external abort is marginally better as an unaware OS knows its
> affects this thread, and may be able to kill it.
> SError with an imp-def ESR is indistinguishable from 'part of the soc fell out',
> and should always result in a panic().
>
>
>> (2) just stop QEMU (as we would for a memory error in QEMU's
>> own memory)
>
> This is also valid. A machine may take external-abort to EL3 and then
> reboot/crash/burn.
>
>
> Just in case this is the deeper issue: I keep picking on memory-errors, what
> about CPU errors?
> Linux can't handle these at all, unless they are also memory errors. If we take
> an imprecise abort from a guest KVM can't tell Qemu using signals. We don't have
> any mechanism to tell user-space about imprecise exceptions. In this case KVM
> throws an imp-def SError back at the affected vcpu, these are allowed to be
> imprecise, as this is the closest thing we have.
>
> This does mean that any AO/AR signal Qemu gets is a memory error.
>
>
> Happy New Year,
>
> James
>
> .
>

\
 
 \ /
  Last update: 2019-01-10 13:10    [W:0.076 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site