lkml.org 
[lkml]   [2019]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] clocksource: sun5i: fail gracefully when clock rate is unavailable
Date
If the clock tree is not fully populated when the timer-sun5i init code
is called, attempts to get the clock rate for the timer would fail and
return 0.

Make the init code for both clock events and clocksource check the
returned clock rate and fail gracefully if the result is 0, instead of
causing a divide by 0 exception later on.

Fixes: 4a59058f0b09 ("clocksource/drivers/sun5i: Refactor the current code")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
drivers/clocksource/timer-sun5i.c | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/drivers/clocksource/timer-sun5i.c b/drivers/clocksource/timer-sun5i.c
index 3b56ea3f52af..552c5254390c 100644
--- a/drivers/clocksource/timer-sun5i.c
+++ b/drivers/clocksource/timer-sun5i.c
@@ -202,6 +202,11 @@ static int __init sun5i_setup_clocksource(struct device_node *node,
}

rate = clk_get_rate(clk);
+ if (!rate) {
+ pr_err("Couldn't get parent clock rate\n");
+ ret = -EINVAL;
+ goto err_disable_clk;
+ }

cs->timer.base = base;
cs->timer.clk = clk;
@@ -275,6 +280,11 @@ static int __init sun5i_setup_clockevent(struct device_node *node, void __iomem
}

rate = clk_get_rate(clk);
+ if (!rate) {
+ pr_err("Couldn't get parent clock rate\n");
+ ret = -EINVAL;
+ goto err_disable_clk;
+ }

ce->timer.base = base;
ce->timer.ticks_per_jiffy = DIV_ROUND_UP(rate, HZ);
--
2.20.1
\
 
 \ /
  Last update: 2019-01-10 07:22    [W:0.075 / U:0.612 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site