lkml.org 
[lkml]   [2018]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/2] crypto: skcipher: Remove VLA usage for SKCIPHER_REQUEST_ON_STACK
On Thu, Sep 6, 2018 at 1:22 PM, Kees Cook <keescook@chromium.org> wrote:
> On Wed, Sep 5, 2018 at 5:43 PM, Kees Cook <keescook@chromium.org> wrote:
>> On Wed, Sep 5, 2018 at 3:49 PM, Ard Biesheuvel
>> <ard.biesheuvel@linaro.org> wrote:
>>> On 5 September 2018 at 23:05, Kees Cook <keescook@chromium.org> wrote:
>>>> On Wed, Sep 5, 2018 at 2:18 AM, Ard Biesheuvel
>>>> <ard.biesheuvel@linaro.org> wrote:
>>>>> On 4 September 2018 at 20:16, Kees Cook <keescook@chromium.org> wrote:
>>>>>> In the quest to remove all stack VLA usage from the kernel[1], this
>>>>>> caps the skcipher request size similar to other limits and adds a sanity
>>>>>> check at registration. Looking at instrumented tcrypt output, the largest
>>>>>> is for lrw:
>>>>>>
>>>>>> crypt: testing lrw(aes)
>>>>>> crypto_skcipher_set_reqsize: 8
>>>>>> crypto_skcipher_set_reqsize: 88
>>>>>> crypto_skcipher_set_reqsize: 472
>>>>>>
>>>>>
>>>>> Are you sure this is a representative sampling? I haven't double
>>>>> checked myself, but we have plenty of drivers for peripherals in
>>>>> drivers/crypto that implement block ciphers, and they would not turn
>>>>> up in tcrypt unless you are running on a platform that provides the
>>>>> hardware in question.
>>>>
>>>> Hrm, excellent point. Looking at this again:
>>>> [...]
>>>> And of the crt_ablkcipher.reqsize assignments/initializers, I found:
>>>>
>>>> ablkcipher reqsize:
>>>> 1 struct dcp_aes_req_ctx
>>>> 8 struct atmel_tdes_reqctx
>>>> 8 struct cryptd_blkcipher_request_ctx
>>>> 8 struct mtk_aes_reqctx
>>>> 8 struct omap_des_reqctx
>>>> 8 struct s5p_aes_reqctx
>>>> 8 struct sahara_aes_reqctx
>>>> 8 struct stm32_cryp_reqctx
>>>> 8 struct stm32_cryp_reqctx
>>>> 16 struct ablk_ctx
>>>> 24 struct atmel_aes_reqctx
>>>> 48 struct omap_aes_reqctx
>>>> 48 struct omap_aes_reqctx
>>>> 48 struct qat_crypto_request
>>>> 56 struct artpec6_crypto_request_context
>>>> 64 struct chcr_blkcipher_req_ctx
>>>> 80 struct spacc_req
>>>> 80 struct virtio_crypto_sym_request
>>>> 136 struct qce_cipher_reqctx
>>>> 168 struct n2_request_context
>>>> 328 struct ccp_des3_req_ctx
>>>> 400 struct ccp_aes_req_ctx
>>>> 536 struct hifn_request_context
>>>> 992 struct cvm_req_ctx
>>>> 2456 struct iproc_reqctx_s
>
> All of these are ASYNC (they're all crt_ablkcipher), so IIUC, I can ignore them.
>
>>>> The base ablkcipher wrapper is:
>>>> 80 struct ablkcipher_request
>>>>
>>>> And in my earlier skcipher wrapper analysis, lrw was the largest
>>>> skcipher wrapper:
>>>> 384 struct rctx
>>>>
>>>> iproc_reqctx_s is an extreme outlier, with cvm_req_ctx at a bit less than half.
>>>>
>>>> Making this a 2920 byte fixed array doesn't seem sensible at all
>>>> (though that's what's already possible to use with existing
>>>> SKCIPHER_REQUEST_ON_STACK users).
>>>>
>>>> What's the right path forward here?
>>>>
>>>
>>> The skcipher implementations based on crypto IP blocks are typically
>>> asynchronous, and I wouldn't be surprised if a fair number of
>>> SKCIPHER_REQUEST_ON_STACK() users are limited to synchronous
>>> skciphers.
>>
>> Looks similar to ahash vs shash. :) Yes, so nearly all
>> crypto_alloc_skcipher() users explicitly mask away ASYNC. What's left
>> appears to be:
>>
>> crypto/drbg.c: sk_tfm = crypto_alloc_skcipher(ctr_name, 0, 0);
>> crypto/tcrypt.c: tfm = crypto_alloc_skcipher(algo, 0, async ? 0
>> : CRYPTO_ALG_ASYNC);
>> drivers/crypto/omap-aes.c: ctx->ctr =
>> crypto_alloc_skcipher("ecb(aes)", 0, 0);
>> drivers/md/dm-crypt.c: cc->cipher_tfm.tfms[i] =
>> crypto_alloc_skcipher(ciphermode, 0, 0);
>> drivers/md/dm-integrity.c: ic->journal_crypt =
>> crypto_alloc_skcipher(ic->journal_crypt_alg.alg_string, 0, 0);
>> fs/crypto/keyinfo.c: struct crypto_skcipher *tfm =
>> crypto_alloc_skcipher("ecb(aes)", 0, 0);
>> fs/crypto/keyinfo.c: ctfm = crypto_alloc_skcipher(mode->cipher_str, 0, 0);
>> fs/ecryptfs/crypto.c: crypt_stat->tfm =
>> crypto_alloc_skcipher(full_alg_name, 0, 0);
>>
>> I'll cross-reference this with SKCIPHER_REQUEST_ON_STACK...
>
> None of these use SKCIPHER_REQUEST_ON_STACK that I can find.
>
>>> So we could formalize this and limit SKCIPHER_REQUEST_ON_STACK() to
>>> synchronous skciphers, which implies that the reqsize limit only has
>>> to apply synchronous skciphers as well. But before we can do this, we
>>> have to identify the remaining occurrences that allow asynchronous
>>> skciphers to be used, and replace them with heap allocations.
>>
>> Sounds good; thanks!
>
> crypto_init_skcipher_ops_blkcipher() doesn't touch reqsize at all, so
> the only places I can find it gets changed are with direct callers of
> crypto_skcipher_set_reqsize(), which, when wrapping a sync blkcipher
> start with a reqsize == 0. So, the remaining non-ASYNC callers ask
> for:
>
> 4 struct sun4i_cipher_req_ctx
> 96 struct crypto_rfc3686_req_ctx
> 375 sum:
> 160 crypto_skcipher_blocksize(cipher) (max)
> 152 struct crypto_cts_reqctx
> 63 align_mask (max)
> 384 struct rctx
>
> So, following your patch to encrypt/decrypt, I can add reqsize check
> there. How does this look, on top of your patch?
>
> --- a/include/crypto/skcipher.h
> +++ b/include/crypto/skcipher.h
> @@ -144,9 +144,10 @@ struct skcipher_alg {
> /*
> * This must only ever be used with synchronous algorithms.
> */
> +#define MAX_SYNC_SKCIPHER_REQSIZE 384
> #define SKCIPHER_REQUEST_ON_STACK(name, tfm) \
> char __##name##_desc[sizeof(struct skcipher_request) + \
> - crypto_skcipher_reqsize(tfm)] CRYPTO_MINALIGN_ATTR = { 1 } \
> + MAX_SYNC_SKCIPHER_REQSIZE] CRYPTO_MINALIGN_ATTR = { 1 } \
> struct skcipher_request *name = (void *)__##name##_desc

If the lack of named initializer is too ugly, we could do something crazy like:

#define MAX_SYNC_SKCIPHER_REQSIZE 384
struct skcipher_request_on_stack {
union {
struct skcipher_request req;
char bytes[sizeof(struct skcipher_request) +
MAX_SYNC_SKCIPHER_REQSIZE];
};
};

/*
* This must only ever be used with synchronous algorithms.
*/
#define SKCIPHER_REQUEST_ON_STACK(name) \
struct skcipher_request_on_stack __##name##_req = \
{ req.__onstack = 1 }; \
struct skcipher_request *name = &(__##name##_req.req)


-Kees

--
Kees Cook
Pixel Security

\
 
 \ /
  Last update: 2018-09-07 00:23    [W:1.069 / U:0.528 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site