lkml.org 
[lkml]   [2018]   [Sep]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/2] mmc: dt-bindings: add "bus-clk" for MT2712
From
Date
On Sat, 2018-09-29 at 01:34 +0800, Sean Wang wrote:
> On Fri, 2018-09-28 at 19:40 +0800, Chaotian Jing wrote:
> > On MT2712 MSDC0/3, HCLK/bus-clk need gate/ungate together,
> > or will hang when access MSDC register.
> >
> > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
> > ---
> > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 1 +
> > 1 file changed, 1 insertion(+)
> >
> > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> > index f33467a..182299b 100644
> > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> > @@ -22,6 +22,7 @@ Required properties:
> > "source" - source clock (required)
> > "hclk" - HCLK which used for host (required)
> > "source_cg" - independent source clock gate (required for MT2712)
> > + "bus_clk" - bus clk used for internal register access(required for MT2712 MSDC0/3)
>
> use a full name in the description such as changing "clk" to "clock" and
>
> add an extra blank char prior to left parenthesis
>
OK, fixed at v1 version.

> > - pinctrl-names: should be "default", "state_uhs"
> > - pinctrl-0: should contain default/high speed pin ctrl
> > - pinctrl-1: should contain uhs mode pin ctrl
>
>


\
 
 \ /
  Last update: 2018-09-29 04:39    [W:0.051 / U:1.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site