lkml.org 
[lkml]   [2018]   [Sep]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] clocksource/drivers/timer-atmel-pit: Properly handle error cases
Date
From: Alexandre Belloni <alexandre.belloni@bootlin.com>

The smatch utility reports a possible leak:

smatch warnings:
drivers/clocksource/timer-atmel-pit.c:183 at91sam926x_pit_dt_init() warn: possible memory leak of 'data'

Ensure data is freed before exiting with an error.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
drivers/clocksource/timer-atmel-pit.c | 20 ++++++++++++++------
1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/drivers/clocksource/timer-atmel-pit.c b/drivers/clocksource/timer-atmel-pit.c
index ec8a437..2fab18f 100644
--- a/drivers/clocksource/timer-atmel-pit.c
+++ b/drivers/clocksource/timer-atmel-pit.c
@@ -180,26 +180,29 @@ static int __init at91sam926x_pit_dt_init(struct device_node *node)
data->base = of_iomap(node, 0);
if (!data->base) {
pr_err("Could not map PIT address\n");
- return -ENXIO;
+ ret = -ENXIO;
+ goto exit;
}

data->mck = of_clk_get(node, 0);
if (IS_ERR(data->mck)) {
pr_err("Unable to get mck clk\n");
- return PTR_ERR(data->mck);
+ ret = PTR_ERR(data->mck);
+ goto exit;
}

ret = clk_prepare_enable(data->mck);
if (ret) {
pr_err("Unable to enable mck\n");
- return ret;
+ goto exit;
}

/* Get the interrupts property */
data->irq = irq_of_parse_and_map(node, 0);
if (!data->irq) {
pr_err("Unable to get IRQ from DT\n");
- return -EINVAL;
+ ret = -EINVAL;
+ goto exit;
}

/*
@@ -227,7 +230,7 @@ static int __init at91sam926x_pit_dt_init(struct device_node *node)
ret = clocksource_register_hz(&data->clksrc, pit_rate);
if (ret) {
pr_err("Failed to register clocksource\n");
- return ret;
+ goto exit;
}

/* Set up irq handler */
@@ -236,7 +239,8 @@ static int __init at91sam926x_pit_dt_init(struct device_node *node)
"at91_tick", data);
if (ret) {
pr_err("Unable to setup IRQ\n");
- return ret;
+ clocksource_unregister(&data->clksrc);
+ goto exit;
}

/* Set up and register clockevents */
@@ -254,6 +258,10 @@ static int __init at91sam926x_pit_dt_init(struct device_node *node)
clockevents_register_device(&data->clkevt);

return 0;
+
+exit:
+ kfree(data);
+ return ret;
}
TIMER_OF_DECLARE(at91sam926x_pit, "atmel,at91sam9260-pit",
at91sam926x_pit_dt_init);
--
2.7.4
\
 
 \ /
  Last update: 2018-09-27 16:52    [W:0.043 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site