lkml.org 
[lkml]   [2018]   [Sep]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCHv5 0/6] Add support for UHS-I on Exynos5422 odroid boards
Date
This is series v4 since my previous patches were incomplete with driver
changes missing.

v5 changes.
drop the cd-gpios wp-gpio gpio pin setting, just add the pinctrl
configration to support write protect.

v4 changes.
squash cd-gpios and wp-gpio changes into single patch.
change the subject prefix to "ARM: dts: exynos:"

These changes add UHS-I tuning for dw_mmc-exynos driver.

Rebased on Krzysztof branch next/dt
[0] git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git

Anand Moon (6):
ARM: dts: exynos: Added UHS-I bus speed support
ARM: dts: exynos: fix regulator min values of LDO13 for Odroid XU3/XU4
ARM: dts: exynos: update maximum frequency for sdcard to 200MHz
ARM: dts: exynos: Add pin configuration for SD write protect on Odroid
XU3/XU4
ARM: dts: exynos: update maximum frequency for emmc to 200MHz
mmc: dw_mmc-exynos: Add tuning for sdr and ddr timing for USH-I mode

arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 7 +++++++
arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 8 ++++++--
arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 1 +
drivers/mmc/host/dw_mmc-exynos.c | 11 +++++++++++
4 files changed, 25 insertions(+), 2 deletions(-)

--
2.17.1

\
 
 \ /
  Last update: 2018-09-27 16:08    [W:0.094 / U:17.840 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site