lkml.org 
[lkml]   [2018]   [Sep]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/2] mmc: sdhci-msm: Re-initialize DLL if MCLK is gated dynamically
From
Date
Hi Doug,


On 9/26/2018 3:58 AM, Doug Anderson wrote:
> Hi,
>
> On Tue, Sep 25, 2018 at 8:05 AM Veerabhadrarao Badiganti
> <vbadigan@codeaurora.org> wrote:
>> + /*
>> + * Whenever core-clock is gated dynamically, it's needed to
>> + * re-initialize the DLL when the clock is ungated.
>> + */
>> + if (msm_host->restore_dll_cfg_needed && msm_host->clk_rate) {
>> + msm_host->restore_dll_cfg = true;
>> + mmc_retune_needed(host->mmc);
> Using the boolean "restore_dll_cfg" to communicate like this seems
> really fragile. I have no basis in fact, but I worry that something
> will happen in the meantime that really ought to invalidate the
> "saved_tuning_phase" but the boolean will still be set.
>
> Is there a reason you can't just call msm_config_cm_dll_phase()
> directly from sdhci_msm_runtime_resume()? Perhaps after the
> clk_bulk_prepare_enable() call below?

I can do that.

But we don't need to restore the clock phase for all speed modes since
every mode
doesn't use DLL. Only few speed modes (only SDR104 mode for SD card)
would need to restore DLL setting. So I would need to do some extra checks
for performing this operation for only required speed modes.
And we should re-initialize the DLL first before programming the phase.

I wanted to reuse the existing logic which does all these things. So did
this way.

>
> -Doug
Thanks
Veera

\
 
 \ /
  Last update: 2018-09-27 13:00    [W:2.517 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site