lkml.org 
[lkml]   [2018]   [Sep]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 00/10] GICv3 support for kexec/kdump on EFI systems
From
Date
Hi Marc

On 9/21/2018 1:59 PM, Marc Zyngier wrote:
> The GICv3 architecture has the remarkable feature that once LPI tables
> have been assigned to redistributors and that LPI delivery is enabled,
> there is no guarantee that LPIs can be turned off (and most
> implementations do not allow it), nor can it be reprogrammed to use
> other tables.
>
> This is a bit of a problem for kexec, where the secondary kernel
> completely looses track of the previous allocations. If the secondary
> kernel doesn't allocate the tables exactly the same way, no LPIs will
> be delivered by the GIC (which continues to use the old tables), and
> memory previously allocated for the pending tables will be slowly
> corrupted, one bit at a time.
>
> The workaround for this is based on a series[1] by Ard Biesheuvel,
> which adds the required infrastructure for memory reservations to be
> passed from one kernel to another using an EFI table.
>
> This infrastructure is then used to register the allocation of GIC
> tables with EFI, and allow the GIC driver to safely reuse the existing
> programming if it detects that the tables have been correctly
> registered. On non-EFI systems, there is not much we can do.
>
> This has been tested on a TX2 system both as a host and a guest. I'd
> welcome additional testing of different HW. For convenience, I've
> stashed a branch containing the whole thing at [2].
I tested [2] from the 4.19-rc4 set which included this series and [1].
Tested kexec on Centriq system with ITS support (46 core).  On-board was a MLX CX5 NIC, verified MSIs are active in /proc/interrupts.
Prior to this we used a workaround from Shanker to reuse the same tables in the kexec'ed kernel.
Let me know if further testing is needed, and thanks for adding this support.
> [1] https://marc.info/?l=linux-efi&m=153754757208163&w=2
> [2] https://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms.git/log/?h=irq/gicv3-kdump
>
> Marc Zyngier (10):
> irqchip/gic-v3-its: Change initialization ordering for LPIs
> irqchip/gic-v3-its: Consolidate LPI_PENDBASE_SZ usage
> irqchip/gic-v3-its: Split property table clearing from allocation
> irqchip/gic-v3-its: Move pending table allocation to init time
> irqchip/gic-v3-its: Keep track of property table's PA and VA
> irqchip/gic-v3-its: Allow use of pre-programmed LPI tables
> irqchip/gic-v3-its: Use pre-programmed redistributor tables with kdump
> kernels
> irqchip/gic-v3-its: Check that all RDs have the same property table
> irqchip/gic-v3-its: Register LPI tables with EFI config table
> irqchip/gic-v3-its: Allow use of LPI tables in reserved memory
>
> drivers/irqchip/irq-gic-v3-its.c | 249 ++++++++++++++++++++++-------
> drivers/irqchip/irq-gic-v3.c | 20 ++-
> include/linux/irqchip/arm-gic-v3.h | 4 +-
> 3 files changed, 208 insertions(+), 65 deletions(-)
>

--
Qualcomm Datacenter Technologies as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.

\
 
 \ /
  Last update: 2018-09-27 23:11    [W:0.805 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site