lkml.org 
[lkml]   [2018]   [Sep]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 0/8] add generic builtin command line
On 27 September 2018 at 18:55, Maksym Kokhan
<maksym.kokhan@globallogic.com> wrote:
> There were series of patches [1] for 4.3.0-rc3, that allowed
> architectures to use a generic builtin command line. I have rebased
> these patches on kernel 4.19.0-rc4.
>

Could you please elaborate on the purpose of this series? Is it simply
to align between architectures? Does it solve an actual problem?

> Things, modified in comparison with original patches:
> * There was some bug for mips, in the case when CONFIG_CMDLINE_PREPEND
> and CONFIG_CMDLINE_APPEND are empty and CMDLINE_OVERRIDE is not set,
> command line from bootloader was ignored, so I fixed it, modifying
> patch "add generic builtin command line".
>
> * Implemented new patch to resolve conflict with new kernel, which
> modify EFI stub code. Unfortunately, I don't have capability to test
> this modification on real arm board with EFI.
>
> * Removed new realisation of mips builtin command line, which was
> created after 4.3.0-rc3.
>
> * Kernel 4.3.0-rc3 with original patches could not be compiled for
> powerpc due to prom_init.c checking by prom_init_check.sh. So I added
> strlcat (which is used by cmdline_add_builtin macro) to
> prom_init_check.sh whitelist.
>
> Patches have been tested in QEMU for x86, arm (little-endian), arm64
> (little-endian), mips (little-endian, 32-bit) and powerpc
> (big-endian, 64-bit), everything works perfectly. Also it was tested
> on linux-next (next-20180924 tag) for all listed above architectures.
>
> [1] : https://lore.kernel.org/patchwork/patch/604992/
>
> Daniel Walker (7):
> add generic builtin command line
> drivers: of: ifdef out cmdline section
> x86: convert to generic builtin command line
> arm: convert to generic builtin command line
> arm64: convert to generic builtin command line
> mips: convert to generic builtin command line
> powerpc: convert to generic builtin command line
>
> Maksym Kokhan (1):
> efi: modify EFI stub code for arm/arm64
>
> arch/arm/Kconfig | 38 +-----------------
> arch/arm/kernel/atags_parse.c | 14 ++-----
> arch/arm/kernel/devtree.c | 2 +
> arch/arm64/Kconfig | 17 +-------
> arch/arm64/kernel/setup.c | 3 ++
> arch/mips/Kconfig | 24 +----------
> arch/mips/Kconfig.debug | 47 ----------------------
> arch/mips/kernel/setup.c | 41 ++-----------------
> arch/powerpc/Kconfig | 23 +----------
> arch/powerpc/kernel/prom.c | 4 ++
> arch/powerpc/kernel/prom_init.c | 8 ++--
> arch/powerpc/kernel/prom_init_check.sh | 2 +-
> arch/x86/Kconfig | 44 +--------------------
> arch/x86/kernel/setup.c | 19 ++-------
> drivers/firmware/efi/libstub/arm-stub.c | 10 ++---
> drivers/of/fdt.c | 2 +-
> include/linux/cmdline.h | 70 +++++++++++++++++++++++++++++++++
> init/Kconfig | 68 ++++++++++++++++++++++++++++++++
> 18 files changed, 173 insertions(+), 263 deletions(-)
> create mode 100644 include/linux/cmdline.h
>
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2018-09-27 19:07    [W:0.098 / U:0.760 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site