lkml.org 
[lkml]   [2018]   [Sep]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v3] arm64: dts: rockchip: add initial dts support for Rockpro64
    Date
    Rockpro64 is a rockchip RK3399 based board from pine64.org.
    This patch adds basic device node support for Rockpro64 board and make it able
    to bring up.

    Peripheral Works
    - Sdcard
    - USB 2.0, 3.0
    - Leds
    - Ethernet
    - Debug console

    Not working:
    - USB Type-C

    Signed-off-by: Akash Gajjar <Akash_Gajjar@mentor.com>
    ---
    changes for v2
    - Added support for usb 2.0, 3.0
    - Added fusb302 node and its regulator support
    - Cleanup pinctrl node
    - Remove backlight, pcie, sound codec node inherited from firefly-rk3399 dts
    changes for v3
    - Added copyright properly
    - Typo correction in commit message

    Documentation/devicetree/bindings/arm/rockchip.txt | 4 +
    arch/arm64/boot/dts/rockchip/Makefile | 1 +
    arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts | 692 +++++++++++++++++++++
    3 files changed, 697 insertions(+)
    create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts

    diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
    index acfd3c7..ac95183 100644
    --- a/Documentation/devicetree/bindings/arm/rockchip.txt
    +++ b/Documentation/devicetree/bindings/arm/rockchip.txt
    @@ -160,6 +160,10 @@ Rockchip platforms device tree bindings
    Required root node properties:
    - compatible = "pine64,rock64", "rockchip,rk3328";

    +- Pine64 RockPro64 board:
    + Required root node properties:
    + - compatible = "pine64,rockpro64", "rockchip,rk3399";
    +
    - Rockchip PX3 Evaluation board:
    Required root node properties:
    - compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
    diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
    index b0092d9..03d523a 100644
    --- a/arch/arm64/boot/dts/rockchip/Makefile
    +++ b/arch/arm64/boot/dts/rockchip/Makefile
    @@ -14,5 +14,6 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb
    dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-bob.dtb
    dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb
    dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
    +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
    dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
    dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
    diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
    new file mode 100644
    index 0000000..1d35f54
    --- /dev/null
    +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
    @@ -0,0 +1,692 @@
    +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
    +/*
    + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
    + * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
    + */
    +
    +/dts-v1/;
    +#include <dt-bindings/input/linux-event-codes.h>
    +#include <dt-bindings/pwm/pwm.h>
    +#include "rk3399.dtsi"
    +#include "rk3399-opp.dtsi"
    +
    +/ {
    + model = "Pine64 RockPro64";
    + compatible = "pine64,rockpro64", "rockchip,rk3399";
    +
    + chosen {
    + stdout-path = "serial2:1500000n8";
    + };
    +
    + clkin_gmac: external-gmac-clock {
    + compatible = "fixed-clock";
    + clock-frequency = <125000000>;
    + clock-output-names = "clkin_gmac";
    + #clock-cells = <0>;
    + };
    +
    + dc_12v: dc-12v {
    + compatible = "regulator-fixed";
    + regulator-name = "dc_12v";
    + regulator-always-on;
    + regulator-boot-on;
    + regulator-min-microvolt = <12000000>;
    + regulator-max-microvolt = <12000000>;
    + };
    +
    + gpio-keys {
    + compatible = "gpio-keys";
    + autorepeat;
    + pinctrl-names = "default";
    + pinctrl-0 = <&pwrbtn>;
    +
    + power {
    + debounce-interval = <100>;
    + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
    + label = "GPIO Key Power";
    + linux,code = <KEY_POWER>;
    + wakeup-source;
    + };
    + };
    +
    + leds {
    + compatible = "gpio-leds";
    + pinctrl-names = "default";
    + pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
    +
    + work-led {
    + label = "work";
    + default-state = "on";
    + gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
    + };
    +
    + diy-led {
    + label = "diy";
    + default-state = "off";
    + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
    + };
    + };
    +
    + sdio_pwrseq: sdio-pwrseq {
    + compatible = "mmc-pwrseq-simple";
    + clocks = <&rk808 1>;
    + clock-names = "ext_clock";
    + pinctrl-names = "default";
    + pinctrl-0 = <&wifi_enable_h>;
    +
    + /*
    + * On the module itself this is one of these (depending
    + * on the actual card populated):
    + * - SDIO_RESET_L_WL_REG_ON
    + * - PDN (power down when low)
    + */
    + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
    + };
    +
    + /* switched by pmic_sleep */
    + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
    + compatible = "regulator-fixed";
    + regulator-name = "vcc1v8_s3";
    + regulator-always-on;
    + regulator-boot-on;
    + regulator-min-microvolt = <1800000>;
    + regulator-max-microvolt = <1800000>;
    + vin-supply = <&vcc_1v8>;
    + };
    +
    + vcc3v3_pcie: vcc3v3-pcie-regulator {
    + compatible = "regulator-fixed";
    + enable-active-high;
    + gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
    + pinctrl-names = "default";
    + pinctrl-0 = <&pcie_pwr_en>;
    + regulator-name = "vcc3v3_pcie";
    + regulator-always-on;
    + regulator-boot-on;
    + vin-supply = <&dc_12v>;
    + };
    +
    + vcc3v3_sys: vcc3v3-sys {
    + compatible = "regulator-fixed";
    + regulator-name = "vcc3v3_sys";
    + regulator-always-on;
    + regulator-boot-on;
    + regulator-min-microvolt = <3300000>;
    + regulator-max-microvolt = <3300000>;
    + vin-supply = <&vcc_sys>;
    + };
    +
    + /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
    + vcc5v0_host: vcc5v0-host-regulator {
    + compatible = "regulator-fixed";
    + enable-active-high;
    + gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
    + pinctrl-names = "default";
    + pinctrl-0 = <&vcc5v0_host_en>;
    + regulator-name = "vcc5v0_host";
    + regulator-always-on;
    + vin-supply = <&vcc_sys>;
    + };
    +
    + vcc5v0_typec: vcc5v0-typec-regulator {
    + compatible = "regulator-fixed";
    + enable-active-high;
    + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
    + pinctrl-names = "default";
    + pinctrl-0 = <&vcc5v0_typec_en>;
    + regulator-name = "vcc5v0_typec";
    + regulator-always-on;
    + vin-supply = <&vcc_sys>;
    + };
    +
    + vcc_sys: vcc-sys {
    + compatible = "regulator-fixed";
    + regulator-name = "vcc_sys";
    + regulator-always-on;
    + regulator-boot-on;
    + regulator-min-microvolt = <5000000>;
    + regulator-max-microvolt = <5000000>;
    + vin-supply = <&dc_12v>;
    + };
    +
    + vdd_log: vdd-log {
    + compatible = "pwm-regulator";
    + pwms = <&pwm2 0 25000 1>;
    + regulator-name = "vdd_log";
    + regulator-always-on;
    + regulator-boot-on;
    + regulator-min-microvolt = <800000>;
    + regulator-max-microvolt = <1400000>;
    + vin-supply = <&vcc_sys>;
    + };
    +};
    +
    +&cpu_l0 {
    + cpu-supply = <&vdd_cpu_l>;
    +};
    +
    +&cpu_l1 {
    + cpu-supply = <&vdd_cpu_l>;
    +};
    +
    +&cpu_l2 {
    + cpu-supply = <&vdd_cpu_l>;
    +};
    +
    +&cpu_l3 {
    + cpu-supply = <&vdd_cpu_l>;
    +};
    +
    +&cpu_b0 {
    + cpu-supply = <&vdd_cpu_b>;
    +};
    +
    +&cpu_b1 {
    + cpu-supply = <&vdd_cpu_b>;
    +};
    +
    +&emmc_phy {
    + status = "okay";
    +};
    +
    +&gmac {
    + assigned-clocks = <&cru SCLK_RMII_SRC>;
    + assigned-clock-parents = <&clkin_gmac>;
    + clock_in_out = "input";
    + phy-supply = <&vcc_lan>;
    + phy-mode = "rgmii";
    + pinctrl-names = "default";
    + pinctrl-0 = <&rgmii_pins>;
    + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
    + snps,reset-active-low;
    + snps,reset-delays-us = <0 10000 50000>;
    + tx_delay = <0x28>;
    + rx_delay = <0x11>;
    + status = "okay";
    +};
    +
    +&i2c0 {
    + clock-frequency = <400000>;
    + i2c-scl-rising-time-ns = <168>;
    + i2c-scl-falling-time-ns = <4>;
    + status = "okay";
    +
    + rk808: pmic@1b {
    + compatible = "rockchip,rk808";
    + reg = <0x1b>;
    + interrupt-parent = <&gpio1>;
    + interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
    + #clock-cells = <1>;
    + clock-output-names = "xin32k", "rk808-clkout2";
    + pinctrl-names = "default";
    + pinctrl-0 = <&pmic_int_l>;
    + rockchip,system-power-controller;
    + wakeup-source;
    +
    + vcc1-supply = <&vcc_sys>;
    + vcc2-supply = <&vcc_sys>;
    + vcc3-supply = <&vcc_sys>;
    + vcc4-supply = <&vcc_sys>;
    + vcc6-supply = <&vcc_sys>;
    + vcc7-supply = <&vcc_sys>;
    + vcc8-supply = <&vcc3v3_sys>;
    + vcc9-supply = <&vcc_sys>;
    + vcc10-supply = <&vcc_sys>;
    + vcc11-supply = <&vcc_sys>;
    + vcc12-supply = <&vcc3v3_sys>;
    + vddio-supply = <&vcc1v8_pmu>;
    +
    + regulators {
    + vdd_center: DCDC_REG1 {
    + regulator-name = "vdd_center";
    + regulator-always-on;
    + regulator-boot-on;
    + regulator-min-microvolt = <750000>;
    + regulator-max-microvolt = <1350000>;
    + regulator-ramp-delay = <6001>;
    + regulator-state-mem {
    + regulator-off-in-suspend;
    + };
    + };
    +
    + vdd_cpu_l: DCDC_REG2 {
    + regulator-name = "vdd_cpu_l";
    + regulator-always-on;
    + regulator-boot-on;
    + regulator-min-microvolt = <750000>;
    + regulator-max-microvolt = <1350000>;
    + regulator-ramp-delay = <6001>;
    + regulator-state-mem {
    + regulator-off-in-suspend;
    + };
    + };
    +
    + vcc_ddr: DCDC_REG3 {
    + regulator-name = "vcc_ddr";
    + regulator-always-on;
    + regulator-boot-on;
    + regulator-state-mem {
    + regulator-on-in-suspend;
    + };
    + };
    +
    + vcc_1v8: DCDC_REG4 {
    + regulator-name = "vcc_1v8";
    + regulator-always-on;
    + regulator-boot-on;
    + regulator-min-microvolt = <1800000>;
    + regulator-max-microvolt = <1800000>;
    + regulator-state-mem {
    + regulator-on-in-suspend;
    + regulator-suspend-microvolt = <1800000>;
    + };
    + };
    +
    + vcc1v8_dvp: LDO_REG1 {
    + regulator-name = "vcc1v8_dvp";
    + regulator-always-on;
    + regulator-boot-on;
    + regulator-min-microvolt = <1800000>;
    + regulator-max-microvolt = <1800000>;
    + regulator-state-mem {
    + regulator-off-in-suspend;
    + };
    + };
    +
    + vcc2v8_dvp: LDO_REG2 {
    + regulator-name = "vcc2v8_dvp";
    + regulator-always-on;
    + regulator-boot-on;
    + regulator-min-microvolt = <2800000>;
    + regulator-max-microvolt = <2800000>;
    + regulator-state-mem {
    + regulator-off-in-suspend;
    + };
    + };
    +
    + vcc1v8_pmu: LDO_REG3 {
    + regulator-name = "vcc1v8_pmu";
    + regulator-always-on;
    + regulator-boot-on;
    + regulator-min-microvolt = <1800000>;
    + regulator-max-microvolt = <1800000>;
    + regulator-state-mem {
    + regulator-on-in-suspend;
    + regulator-suspend-microvolt = <1800000>;
    + };
    + };
    +
    + vcc_sdio: LDO_REG4 {
    + regulator-name = "vcc_sdio";
    + regulator-always-on;
    + regulator-boot-on;
    + regulator-min-microvolt = <1800000>;
    + regulator-max-microvolt = <3000000>;
    + regulator-state-mem {
    + regulator-on-in-suspend;
    + regulator-suspend-microvolt = <3000000>;
    + };
    + };
    +
    + vcca3v0_codec: LDO_REG5 {
    + regulator-name = "vcca3v0_codec";
    + regulator-always-on;
    + regulator-boot-on;
    + regulator-min-microvolt = <3000000>;
    + regulator-max-microvolt = <3000000>;
    + regulator-state-mem {
    + regulator-off-in-suspend;
    + };
    + };
    +
    + vcc_1v5: LDO_REG6 {
    + regulator-name = "vcc_1v5";
    + regulator-always-on;
    + regulator-boot-on;
    + regulator-min-microvolt = <1500000>;
    + regulator-max-microvolt = <1500000>;
    + regulator-state-mem {
    + regulator-on-in-suspend;
    + regulator-suspend-microvolt = <1500000>;
    + };
    + };
    +
    + vcca1v8_codec: LDO_REG7 {
    + regulator-name = "vcca1v8_codec";
    + regulator-always-on;
    + regulator-boot-on;
    + regulator-min-microvolt = <1800000>;
    + regulator-max-microvolt = <1800000>;
    + regulator-state-mem {
    + regulator-off-in-suspend;
    + };
    + };
    +
    + vcc_3v0: LDO_REG8 {
    + regulator-name = "vcc_3v0";
    + regulator-always-on;
    + regulator-boot-on;
    + regulator-min-microvolt = <3000000>;
    + regulator-max-microvolt = <3000000>;
    + regulator-state-mem {
    + regulator-on-in-suspend;
    + regulator-suspend-microvolt = <3000000>;
    + };
    + };
    +
    + vcc3v3_s3: vcc_lan: SWITCH_REG1 {
    + regulator-name = "vcc3v3_s3";
    + regulator-always-on;
    + regulator-boot-on;
    + regulator-state-mem {
    + regulator-off-in-suspend;
    + };
    + };
    +
    + vcc3v3_s0: SWITCH_REG2 {
    + regulator-name = "vcc3v3_s0";
    + regulator-always-on;
    + regulator-boot-on;
    + regulator-state-mem {
    + regulator-off-in-suspend;
    + };
    + };
    + };
    + };
    +
    + vdd_cpu_b: regulator@40 {
    + compatible = "silergy,syr827";
    + reg = <0x40>;
    + fcs,suspend-voltage-selector = <0>;
    + regulator-name = "vdd_cpu_b";
    + regulator-min-microvolt = <712500>;
    + regulator-max-microvolt = <1500000>;
    + regulator-ramp-delay = <1000>;
    + regulator-always-on;
    + regulator-boot-on;
    + vin-supply = <&vcc_sys>;
    +
    + regulator-state-mem {
    + regulator-off-in-suspend;
    + };
    + };
    +
    + vdd_gpu: regulator@41 {
    + compatible = "silergy,syr828";
    + reg = <0x41>;
    + fcs,suspend-voltage-selector = <1>;
    + regulator-name = "vdd_gpu";
    + regulator-min-microvolt = <712500>;
    + regulator-max-microvolt = <1500000>;
    + regulator-ramp-delay = <1000>;
    + regulator-always-on;
    + regulator-boot-on;
    + vin-supply = <&vcc_sys>;
    +
    + regulator-state-mem {
    + regulator-off-in-suspend;
    + };
    + };
    +};
    +
    +&i2c1 {
    + i2c-scl-rising-time-ns = <300>;
    + i2c-scl-falling-time-ns = <15>;
    + status = "okay";
    +};
    +
    +&i2c3 {
    + i2c-scl-rising-time-ns = <450>;
    + i2c-scl-falling-time-ns = <15>;
    + status = "okay";
    +};
    +
    +&i2c4 {
    + i2c-scl-rising-time-ns = <600>;
    + i2c-scl-falling-time-ns = <20>;
    + status = "okay";
    +
    + fusb0: typec-portc@22 {
    + compatible = "fcs,fusb302";
    + reg = <0x22>;
    + interrupt-parent = <&gpio1>;
    + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
    + pinctrl-names = "default";
    + pinctrl-0 = <&fusb0_int>;
    + vbus-supply = <&vcc5v0_typec>;
    + status = "okay";
    + };
    +};
    +
    +&i2s0 {
    + rockchip,playback-channels = <8>;
    + rockchip,capture-channels = <8>;
    + status = "okay";
    +};
    +
    +&i2s1 {
    + rockchip,playback-channels = <2>;
    + rockchip,capture-channels = <2>;
    + status = "okay";
    +};
    +
    +&i2s2 {
    + status = "okay";
    +};
    +
    +&io_domains {
    + status = "okay";
    +
    + bt656-supply = <&vcc1v8_dvp>;
    + audio-supply = <&vcca1v8_codec>;
    + sdmmc-supply = <&vcc_sdio>;
    + gpio1830-supply = <&vcc_3v0>;
    +};
    +
    +&pmu_io_domains {
    + pmu1830-supply = <&vcc_3v0>;
    + status = "okay";
    +};
    +
    +&pinctrl {
    + buttons {
    + pwrbtn: pwrbtn {
    + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
    + };
    + };
    +
    + fusb302x {
    + fusb0_int: fusb0-int {
    + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
    + };
    + };
    +
    + leds {
    + work_led_gpio: work_led-gpio {
    + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
    + };
    +
    + diy_led_gpio: diy_led-gpio {
    + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
    + };
    + };
    +
    + lcd-panel {
    + lcd_panel_reset: lcd-panel-reset {
    + rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
    + };
    + };
    +
    + pcie {
    + pcie_pwr_en: pcie-pwr-en {
    + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
    + };
    + };
    +
    + pmic {
    + pmic_int_l: pmic-int-l {
    + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
    + };
    +
    + vsel1_gpio: vsel1-gpio {
    + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
    + };
    +
    + vsel2_gpio: vsel2-gpio {
    + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
    + };
    + };
    +
    + sdio-pwrseq {
    + wifi_enable_h: wifi-enable-h {
    + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
    + };
    + };
    +
    + usb-typec {
    + vcc5v0_typec_en: vcc5v0_typec_en {
    + rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
    + };
    + };
    +
    + usb2 {
    + vcc5v0_host_en: vcc5v0-host-en {
    + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
    + };
    + };
    +};
    +
    +&pwm0 {
    + status = "okay";
    +};
    +
    +&pwm2 {
    + status = "okay";
    +};
    +
    +&saradc {
    + vref-supply = <&vcca1v8_s3>;
    + status = "okay";
    +};
    +
    +&sdmmc {
    + bus-width = <4>;
    + cap-mmc-highspeed;
    + cap-sd-highspeed;
    + cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
    + disable-wp;
    + max-frequency = <150000000>;
    + pinctrl-names = "default";
    + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
    + status = "okay";
    +};
    +
    +&sdhci {
    + bus-width = <8>;
    + mmc-hs400-1_8v;
    + mmc-hs400-enhanced-strobe;
    + non-removable;
    + status = "okay";
    +};
    +
    +&tcphy0 {
    + status = "okay";
    +};
    +
    +&tcphy1 {
    + status = "okay";
    +};
    +
    +&tsadc {
    + /* tshut mode 0:CRU 1:GPIO */
    + rockchip,hw-tshut-mode = <1>;
    + /* tshut polarity 0:LOW 1:HIGH */
    + rockchip,hw-tshut-polarity = <1>;
    + status = "okay";
    +};
    +
    +&u2phy0 {
    + status = "okay";
    +
    + u2phy0_otg: otg-port {
    + status = "okay";
    + };
    +
    + u2phy0_host: host-port {
    + phy-supply = <&vcc5v0_host>;
    + status = "okay";
    + };
    +};
    +
    +&u2phy1 {
    + status = "okay";
    +
    + u2phy1_otg: otg-port {
    + status = "okay";
    + };
    +
    + u2phy1_host: host-port {
    + phy-supply = <&vcc5v0_host>;
    + status = "okay";
    + };
    +};
    +
    +&uart0 {
    + pinctrl-names = "default";
    + pinctrl-0 = <&uart0_xfer &uart0_cts>;
    + status = "okay";
    +};
    +
    +&uart2 {
    + status = "okay";
    +};
    +
    +&usb_host0_ehci {
    + status = "okay";
    +};
    +
    +&usb_host0_ohci {
    + status = "okay";
    +};
    +
    +&usb_host1_ehci {
    + status = "okay";
    +};
    +
    +&usb_host1_ohci {
    + status = "okay";
    +};
    +
    +&usbdrd3_0 {
    + status = "okay";
    +};
    +
    +&usbdrd_dwc3_0 {
    + status = "okay";
    + dr_mode = "otg";
    +};
    +
    +&usbdrd3_1 {
    + status = "okay";
    +};
    +
    +&usbdrd_dwc3_1 {
    + status = "okay";
    + dr_mode = "host";
    +};
    +
    +&vopb {
    + status = "okay";
    +};
    +
    +&vopb_mmu {
    + status = "okay";
    +};
    +
    +&vopl {
    + status = "okay";
    +};
    +
    +&vopl_mmu {
    + status = "okay";
    +};
    --
    1.9.1
    \
     
     \ /
      Last update: 2018-09-26 08:32    [W:2.806 / U:0.004 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site