lkml.org 
[lkml]   [2018]   [Sep]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: dts: gta04: add serial console wakeup irq
* Andreas Kemnade <andreas@kemnade.info> [180925 05:32]:
> Hi Tony,
>
> On Mon, 24 Sep 2018 15:03:45 -0700
> Tony Lindgren <tony@atomide.com> wrote:
>
> > * Andreas Kemnade <andreas@kemnade.info> [180923 08:12]:
> > > This enables the possibility to have more aggressive runtime pm
> > > by providing proper wakeup irq for the serial console.
> >
> > Thanks applying to omap-for-v4.20/dt.
> >
> > FYI, you can now grep wake /proc/interrupts and see the
> > wakeirq counts increase when they trigger. Might be handy
> > for debugging PM stuff.
> >
> thanks for that information, you also had a patch for checking
> pm which was explicitely marked as not-to-merge. Is there
> any up-to-date version of it?

It's still the same so no updates to it.

> Well, for debugging I check first average currents via bq27000
> attached to omap_hdq. omap_hdq gets stuck after first transaction
> after idling uarts which does not happen when CM_AUTOIDLE1_CORE.AUTO_HDQ
> is cleared. Reloading the omap_hdq module to try to fix things
> makes w1 really freak out (patch already sent for that).
> Well, will do some rtfm and hopefully come back with a patch.
> afaicr there was something special...

Hmm sounds like drivers/w1/masters/omap_hdq.c needs to implement
PM runtime calls, it's probably just enabled because of only
needing the interconnect fck that the uart happens to keep
enabled.

> The result are power management problem in /dev/brain ;-)

:)

Tony


\
 
 \ /
  Last update: 2018-09-25 18:48    [W:0.043 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site