lkml.org 
[lkml]   [2018]   [Sep]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1 1/5] arm64: dts: mt7622: add timer, CCI-400 and PMU nodes
From
Date
Whole series pushed to v4.19-next/dts64

Thanks!

On 18/08/2018 18:02, Ryder Lee wrote:
> Add device tree entries for timer, ARM CCI-400 and its PMU.
> Otherwise, we add a cortex-a53-pmu node to enable hw perfevents.
>
> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
> ---
> change since v1:
> - add a pmu node.
> ---
> arch/arm64/boot/dts/mediatek/mt7622.dtsi | 55 ++++++++++++++++++++++++++++++++
> 1 file changed, 55 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> index de2c47bd..d297100 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> @@ -79,6 +79,7 @@
> #cooling-cells = <2>;
> enable-method = "psci";
> clock-frequency = <1300000000>;
> + cci-control-port = <&cci_control2>;
> };
>
> cpu1: cpu@1 {
> @@ -92,6 +93,7 @@
> #cooling-cells = <2>;
> enable-method = "psci";
> clock-frequency = <1300000000>;
> + cci-control-port = <&cci_control2>;
> };
> };
>
> @@ -113,6 +115,13 @@
> method = "smc";
> };
>
> + pmu {
> + compatible = "arm,cortex-a53-pmu";
> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-affinity = <&cpu0>, <&cpu1>;
> + };
> +
> reserved-memory {
> #address-cells = <2>;
> #size-cells = <2>;
> @@ -218,6 +227,16 @@
> #reset-cells = <1>;
> };
>
> + timer: timer@10004000 {
> + compatible = "mediatek,mt7622-timer",
> + "mediatek,mt6577-timer";
> + reg = <0 0x10004000 0 0x80>;
> + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&infracfg CLK_INFRA_APXGPT_PD>,
> + <&topckgen CLK_TOP_RTC>;
> + clock-names = "system-clk", "rtc-clk";
> + };
> +
> scpsys: scpsys@10006000 {
> compatible = "mediatek,mt7622-scpsys",
> "syscon";
> @@ -325,6 +344,42 @@
> <0 0x10360000 0 0x2000>;
> };
>
> + cci: cci@10390000 {
> + compatible = "arm,cci-400";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0 0x10390000 0 0x1000>;
> + ranges = <0 0 0x10390000 0x10000>;
> +
> + cci_control0: slave-if@1000 {
> + compatible = "arm,cci-400-ctrl-if";
> + interface-type = "ace-lite";
> + reg = <0x1000 0x1000>;
> + };
> +
> + cci_control1: slave-if@4000 {
> + compatible = "arm,cci-400-ctrl-if";
> + interface-type = "ace";
> + reg = <0x4000 0x1000>;
> + };
> +
> + cci_control2: slave-if@5000 {
> + compatible = "arm,cci-400-ctrl-if";
> + interface-type = "ace";
> + reg = <0x5000 0x1000>;
> + };
> +
> + pmu@9000 {
> + compatible = "arm,cci-400-pmu,r1";
> + reg = <0x9000 0x5000>;
> + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> +
> auxadc: adc@11001000 {
> compatible = "mediatek,mt7622-auxadc";
> reg = <0 0x11001000 0 0x1000>;
>

\
 
 \ /
  Last update: 2018-09-25 17:10    [W:0.058 / U:1.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site