lkml.org 
[lkml]   [2018]   [Sep]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 8/8] dt-binding: mtd: Document gpio-addr-flash
On Wed, Sep 05, 2018 at 04:36:43PM +0200, Ricardo Ribalda Delgado wrote:
> Add documentation for gpio-addr-flash. This binding allow creating
> flash devices that are paged using GPIOs.
>
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
> ---
> .../bindings/mtd/gpio-addr-flash.txt | 46 +++++++++++++++++++
> 1 file changed, 46 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mtd/gpio-addr-flash.txt
>
> diff --git a/Documentation/devicetree/bindings/mtd/gpio-addr-flash.txt b/Documentation/devicetree/bindings/mtd/gpio-addr-flash.txt
> new file mode 100644
> index 000000000000..4279e8cad09b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/gpio-addr-flash.txt
> @@ -0,0 +1,46 @@
> +Memory Mapped flash with some address lines addressed using GPIOs
> +
> +Handle the case where a flash device is mostly addressed using physical
> +line and supplemented by GPIOs. This way you can hook up say a 8MiB flash
> +to a 2MiB memory range and use the GPIOs to select a particular range.
> +
> + - compatible : "cfi-gpio-addr-flash"
> + - reg : Address range of the mtd chip that is memory mapped, this is,
> + on the previous example 2MiB.
> + - bank-width : Width (in bytes) of the bank. Equal to the
> + device width times the number of interleaved chips.
> + - probe-type : (optional) "cfi_probe", "jedec_probe". How the mtd chip
> + is going to be probed. If omitted, assumed to be equal to "cfi_probe".

Why not just a bool prop for jedec mode? As-is, the '_probe' part is
redundant.

> + - #address-cells, #size-cells : Must be present if the device has
> + sub-nodes representing partitions (see below). In this case
> + both #address-cells and #size-cells must be equal to 1.

Perhaps most importantly, where's 'gpios' property?

> +
> +The device tree may optionally contain sub-nodes describing partitions of the
> +address space. See partition.txt for more detail.
> +
> +Example:
> +
> + cfi_flash_0: cfi_flash {

flash@300000

> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "cfi-gpio-addr-flash";
> + bank-width = <2>;
> + reg = < 0x00300000 0x00200000 >;
> + gpios = <&gpio_0 3 0>, <&gpio_0 4 0>;
> + partition@0 {

All these under a partitions node is now recommended.

> + reg = < 0x0 0x200000 >;
> + label = "Golden Bitstream";
> + };
> + partition@200000 {
> + reg = < 0x200000 0x200000 >;
> + label = "User Bitstream";
> + };
> + partition@400000 {
> + reg = < 0x400000 0x200000 >;
> + label = "V4L Controls";
> + };
> + partition@600000 {
> + reg = < 0x600000 0x200000 >;
> + label = "Production Data";
> + };
> + } ;
> --
> 2.18.0
>

\
 
 \ /
  Last update: 2018-09-25 22:49    [W:0.149 / U:0.664 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site