lkml.org 
[lkml]   [2018]   [Sep]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v2 00/14] MT8183 IOMMU SUPPORT
    Date
    This patchset mainly adds support for mt8183 IOMMU and SMI.

    mt8183 has only one M4U like mt8173 and is also MTK IOMMU gen2 which
    uses ARM Short-Descriptor translation table format.

    The mt8183 M4U-SMI HW diagram is as below:

    EMI
    |
    M4U
    |
    ----------
    | |
    gals0-rx gals1-rx
    | |
    | |
    gals0-tx gals1-tx
    | |
    ------------
    SMI Common
    ------------
    |
    +-----+-----+--------+-----+-----+-------+-------+
    | | | | | | | |
    | | gals-rx gals-rx | gals-rx gals-rx gals-rx
    | | | | | | | |
    | | | | | | | |
    | | gals-tx gals-tx | gals-tx gals-tx gals-tx
    | | | | | | | |
    larb0 larb1 IPU0 IPU1 larb4 larb5 larb6 CCU
    disp vdec img cam venc img cam

    All the connections are HW fixed, SW can NOT adjust it.

    Compared with mt8173, we add a GALS(Global Async Local Sync) module
    between SMI-common and M4U, and additional GALS between larb2/3/5/6
    and SMI-common. GALS can help synchronize for the modules in different
    clock frequency, it can be seen as a "asynchronous fifo".

    GALS can only help transfer the command/data while it doesn't have
    the configuring register, thus it has the special "smi" clock and it
    doesn't have the "apb" clock. From the diagram above, we add "gals0"
    and "gals1" clocks for smi-common and add a "gals" clock for smi-larb.

    From the diagram above, IPU0/IPU1(Image Processor Unit) and CCU(Camera
    Control Unit) is connected with smi-common directly, we can take them
    as "larb2", "larb3" and "larb7", and their register spaces are
    different with the normal larb.

    This patchset is based on v4.19-rc1.
    the patch 1/2/3/4/5/6 add the iommu/smi support for mt8183;
    the patch 7/8/9/10 add mmu1 support;
    the last patches contain some minor changes:
    -patch 11 fix a issue.
    -patch 12 improve the code flow(add shutdown).
    -patch 13 cleanup some smi codes(delete need_larbid).
    -patch 14 switch to SPDX license.
    this patchset don't contain the dtsi part since it need depend on the
    ccf and power-domain nodes which has not been accepted.

    change notes:
    v2: 1) Fix typo in the commit message of dt-binding.
    2) Change larb2/larb3 to the special larbs.
    3) Refactor the larb-id remapped array(larbid_remapped), then we
    don't need add the new function(mtk_iommu_get_larbid).
    4) Add a new patch for v7s two helpers(paddr_to_iopte and
    iopte_to_paddr).
    5) Change some comment for MTK 4GB mode.

    v1:
    http://lists.infradead.org/pipermail/linux-mediatek/2018-September/014881.html

    Yong Wu (14):
    dt-bindings: mediatek: Add binding for mt8183 IOMMU and SMI
    iommu/mediatek: Use a struct as the platform data
    memory: mtk-smi: Use a general config_port interface
    iommu/io-pgtable-arm-v7s: Add paddr_to_iopte and iopte_to_paddr
    helpers
    iommu/io-pgtable-arm-v7s: Extend MediaTek 4GB Mode
    iommu/mediatek: Add mt8183 IOMMU support
    iommu/mediatek: Add mmu1 support
    memory: mtk-smi: Invoke pm runtime_callback to enable clocks
    memory: mtk-smi: Use a struct for the platform data for smi-common
    memory: mtk-smi: Add bus_sel for mt8183
    iommu/mediatek: Add VLD_PA_RANGE register backup when suspend
    iommu/mediatek: Add shutdown callback
    memory: mtk-smi: Get rid of need_larbid
    iommu/mediatek: Switch to SPDX license identifier

    .../devicetree/bindings/iommu/mediatek,iommu.txt | 15 +-
    .../memory-controllers/mediatek,smi-common.txt | 11 +-
    .../memory-controllers/mediatek,smi-larb.txt | 3 +
    drivers/iommu/io-pgtable-arm-v7s.c | 75 ++++--
    drivers/iommu/io-pgtable.h | 7 +-
    drivers/iommu/mtk_iommu.c | 133 ++++++----
    drivers/iommu/mtk_iommu.h | 23 +-
    drivers/iommu/mtk_iommu_v1.c | 10 +-
    drivers/memory/mtk-smi.c | 267 ++++++++++++++-------
    include/dt-bindings/memory/mt2701-larb-port.h | 10 +-
    include/dt-bindings/memory/mt8173-larb-port.h | 10 +-
    include/dt-bindings/memory/mt8183-larb-port.h | 130 ++++++++++
    include/soc/mediatek/smi.h | 10 +-
    13 files changed, 492 insertions(+), 212 deletions(-)
    create mode 100644 include/dt-bindings/memory/mt8183-larb-port.h

    --
    1.9.1


    \
     
     \ /
      Last update: 2018-09-24 11:00    [W:4.100 / U:0.324 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site