lkml.org 
[lkml]   [2018]   [Sep]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v7 3/4] dt-bindings: power: supply: qcom_bms: Add bindings
From


On 16 September 2018 13:10:45 BST, Sebastian Reichel <sebastian.reichel@collabora.com> wrote:
>Hi,
>
>Sorry for my long delay in reviewing this. I like the binding,
>but the "qcom," specific properties should become common properties
>in
>
>Documentation/devicetree/bindings/power/supply/battery.txt
Thanks for the review, what bindings for ocv would you prefer? The spreadtrum ones or mine?
>and referenced via monitored-battery.
>
>-- Sebastian
>
>On Thu, Jun 14, 2018 at 04:14:16PM +0100, Craig Tatlor wrote:
>> Add bindings for the Qualcomm Battery Monitoring system.
>>
>> Signed-off-by: Craig Tatlor <ctatlor97@gmail.com>
>> Reviewed-by: Rob Herring <robh@kernel.org>
>> ---
>>
>> * Changes from v6:
>> s/celcius/celsius
>> change uah to uAh.
>>
>> * Changes from v5:
>
>> Mentions which values are 8 bit.
>
>>
>
>> * Changes from v4:
>
>> Uses proper units and expands some definitions,
>
>> along with changing vadc@ to adc@.
>>
>> .../bindings/power/supply/qcom_bms.txt | 92
>+++++++++++++++++++
>> 1 file changed, 92 insertions(+)
>> create mode 100644
>Documentation/devicetree/bindings/power/supply/qcom_bms.txt
>>
>> diff --git
>a/Documentation/devicetree/bindings/power/supply/qcom_bms.txt
>b/Documentation/devicetree/bindings/power/supply/qcom_bms.txt
>> new file mode 100644
>> index 000000000000..dc0a9ab9aa64
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/power/supply/qcom_bms.txt
>> @@ -0,0 +1,92 @@
>> +Qualcomm Battery Monitoring System
>> +
>> +The Qualcomm Battery Monitoring System is found inside of Qualcomm
>PM8941
>> +PMICs. It provides open circuit voltage (OCV) and coulomb counter
>registers
>> +that allow the OS to infer a capacity level.
>> +
>> +Required properties:
>> +- compatible: Should contain "qcom,pm8941-bms".
>> +- reg: Specifies the SPMI address and
>length of the
>> + controller's registers.
>> +- interrupts: OCV threshold interrupt.
>> +- io-channels: Should contain IIO channel specifier
>for the
>> + ADC channel that reports battery temperature.
>> +- io-channel-names: Should contain "temp".
>> +- qcom,fcc-temp-legend-celsius: An 8 bit array containing the
>temperature,
>> + in degC, for each column of the full charge
>> + capacity lookup table.
>> +- qcom,fcc-lut-microamp-hours: An array of full charge capacity
>values in uAh,
>> + one entry for each temperature defined in in
>> + qcom,fcc-temp-legend-celsius.
>> +- qcom,ocv-temp-legend-celsius: An 8 bit array containing the
>temperature,
>> + in degC, for each column of the OCV lookup
>> + table.
>> +- qcom,ocv-capacity-legend: An 8 bit array containing the
>capacity for each
>> + row of the OCV lookup table.
>> +- qcom,ocv-lut-microvolt: An array of OCV values in uV, one
>entry for each
>> + capacity defined in qcom,ocv-capacity-legend.
>> +
>> +Example:
>> + pm8941_vadc: adc@3100 {
>> + compatible = "qcom,spmi-vadc";
>> + reg = <0x3100>;
>> + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + #io-channel-cells = <1>;
>> +
>> + bat_temp {
>> + reg = <VADC_LR_MUX1_BAT_THERM>;
>> + };
>> + };
>> +
>> + bms@4000 {
>> + compatible = "qcom,pm8941-bms";
>> + reg = <0x4000>;
>> + interrupts = <0x0 0x40 0x4 IRQ_TYPE_EDGE_RISING>;
>> + interrupt-names = "ocv_thr";
>> +
>> + io-channels = <&pm8941_vadc VADC_LR_MUX1_BAT_THERM>;
>> + io-channel-names = "temp";
>> +
>> + qcom,fcc-temp-legend-celsius = /bits/ 8 <(-10) 0 25 50 65>;
>> + qcom,fcc-lut-microamp-hours = <3230000 3260000 3380000 3410000
>3360000>;
>> +
>> + qcom,ocv-capacity-legend = /bits/ 8 <100 95 90 85 80 75
>> + 70 65 60 55 50 45
>> + 40 35 30 25 20 15
>> + 10 9 8 7 6 5 4 3 2
>> + 1 0>;
>> + qcom,ocv-temp-legend-celsius = /bits/ 8 <(-10) 0 25 50 65>;
>> + qcom,ocv-lut-microvolt = <43050000 43050000 43030000 42990000
>42950000
>> + 42770000 42570000 42550000 42510000 42310000
>> + 42180000 41980000 41970000 41920000 41720000
>> + 41590000 41390000 41450000 41400000 41200000
>> + 41010000 40810000 40920000 40890000 40690000
>> + 40480000 40280000 40440000 40420000 40220000
>> + 40040000 39840000 40010000 39980000 39780000
>> + 39620000 39420000 39550000 39560000 39360000
>> + 39210000 39010000 39090000 39160000 38960000
>> + 38830000 38630000 38740000 38790000 38590000
>> + 38550000 38350000 38440000 38430000 38230000
>> + 38310000 38110000 38230000 38180000 37980000
>> + 38190000 37990000 38040000 38000000 37800000
>> + 38060000 37860000 37900000 37840000 37640000
>> + 37890000 37690000 37770000 37660000 37460000
>> + 37720000 37520000 37560000 37450000 37250000
>> + 37480000 37280000 37290000 37250000 37050000
>> + 37240000 37040000 37020000 36990000 36790000
>> + 37030000 36830000 36730000 36700000 36500000
>> + 36940000 36740000 36670000 36640000 36440000
>> + 36850000 36650000 36600000 36590000 36390000
>> + 36750000 36550000 36520000 36550000 36350000
>> + 36690000 36490000 36380000 36400000 36200000
>> + 36460000 36260000 36180000 36120000 35920000
>> + 36080000 35880000 35680000 35640000 35440000
>> + 35510000 35310000 35050000 35020000 34820000
>> + 34730000 34530000 34300000 34250000 34050000
>> + 33870000 33670000 33040000 32820000 32620000
>> + 30000000 30000000 30000000 30000000 30000000>;
>> + };
>> + };
>> +};
>> --
>> 2.17.0
>>

--
Sent from my Android device with K-9 Mail. Please excuse my brevity.

\
 
 \ /
  Last update: 2018-09-20 16:39    [W:0.151 / U:0.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site