lkml.org 
[lkml]   [2018]   [Sep]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [RFC PATCH] selinux: add a fallback to defcontext for native labeling
Date
Quoting Stephen Smalley (2018-09-19 12:00:33)
> On 09/19/2018 12:52 PM, Taras Kondratiuk wrote:
> > When files on NFSv4 server are not properly labeled (label doesn't match
> > a policy on a client) they will end up with unlabeled_t type which is
> > too generic. We would like to be able to set a default context per
> > mount. 'defcontext' mount option looks like a nice solution, but it
> > doesn't seem to be fully implemented for native labeling. Default
> > context is stored, but is never used.
> >
> > The patch adds a fallback to a default context if a received context is
> > invalid. If the inode context is already initialized, then it is left
> > untouched to preserve a context set locally on a client.
>
> Can you explain the use case further? Why are you exporting a
> filesystem with security labeling enabled to a client that doesn't
> understand all of the labels used within it? Why wouldn't you just
> disable NFSv4 security labeling and/or use a regular context= mount to
> assign a single context to all files in the mount?

Client and server are two embedded devices. They are part of a bigger
modular system and normally run the same SW version, so they understand
each others NFSv4 SELinux labels. But during migration from one SW
version to another a client and a server may run different versions for
some time.

The immediate issue I'm trying to address is a migration between
releases with and without SELinux policy. A client (with policy) gets
initial SID labels from a server (without policy). Those labels are
considered invalid, so files remain unlabeled. This also causes lots of
errors from nfs_setsecurity() in dmesg.

Using 'context=' at mount point level is an option, but in a normal case
when both sides have a policy we need more granular labels. It is
possible to detect a case when a server doesn't have a policy and
remount with 'context=', but this special case handling looks a bit
ugly. Having something like 'defcontext' whould allow to avoid this
special case and unconditionally assign default context to the
mountpoint.

'defcontext' may also help during migration between SELinux-enabled
releases if a new release introduces labels that are not recognized by
older release. In this case they can also fallback to defcontext.

>
> To be clear, defcontext= doesn't work that way for local/FS_USE_XATTR
> filesystems. The context specified by it is only used for:
> 1) files that don't implement the xattr inode operations at all,
> 2) files that lack a security.selinux xattr,
> 3) the MLS portion of the context if it was missing (strictly as a
> legacy compatibility mechanism for RHEL4 which predated the enabling of
> the MLS field/logic).
>
> A file with a security.selinux xattr that is invalid under policy for
> any reason other than a missing MLS field will be handled as having the
> unlabeled context.

inode_doinit_with_dentry() invokes security_context_to_sid_default()
that invokes security_context_to_sid_core() with 'force' flag. Won't
sidtab_context_to_sid() in this case allocate a new SID for the invalid
xattr context instead of leaving it unlabeled?

>
> So this would be a divergence in semantics for defcontext= between
> local/FS_USE_XATTR and NFS/FS_USE_NATIVE filesystems.

Yeah, I also didn't like this semantics mismatch. But from another point
defcontext allows to assign a context to files that would otherwise be
unlabeled. Something similar I'd like to achive for NFS.

>
> >
> > Signed-off-by: Taras Kondratiuk <takondra@cisco.com>
> > ---
> > security/selinux/hooks.c | 25 ++++++++++++++++++++++++-
> > 1 file changed, 24 insertions(+), 1 deletion(-)
> >
> > diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
> > index ad9a9b8e9979..f7debe798bf5 100644
> > --- a/security/selinux/hooks.c
> > +++ b/security/selinux/hooks.c
> > @@ -6598,7 +6598,30 @@ static void selinux_inode_invalidate_secctx(struct inode *inode)
> > */
> > static int selinux_inode_notifysecctx(struct inode *inode, void *ctx, u32 ctxlen)
> > {
> > - return selinux_inode_setsecurity(inode, XATTR_SELINUX_SUFFIX, ctx, ctxlen, 0);
> > + struct superblock_security_struct *sbsec;
> > + struct inode_security_struct *isec;
> > + int rc;
> > +
> > + rc = selinux_inode_setsecurity(inode, XATTR_SELINUX_SUFFIX, ctx, ctxlen, 0);
>
> In this case, we likely don't gain much by reusing
> selinux_inode_setsecurity() here and could just inline the relevant
> portion of it if we were to make this change. Logically they mean
> different things.
>
> > +
> > + /*
> > + * In case of Native labeling with defcontext mount option fall back
> > + * to a default SID if received context is invalid.
> > + */
> > + if (rc == -EINVAL) {
> > + sbsec = inode->i_sb->s_security;
> > + if (sbsec->behavior == SECURITY_FS_USE_NATIVE &&
> > + sbsec->flags & DEFCONTEXT_MNT) {
> > + isec = inode->i_security;
> > + if (!isec->initialized) {
> > + isec->sclass = inode_mode_to_security_class(inode->i_mode);
> > + isec->sid = sbsec->def_sid;
> > + isec->initialized = 1;
> > + }
> > + rc = 0;
> > + }
> > + }
> > + return rc;
> > }
> >
> > /*
> >
>

\
 
 \ /
  Last update: 2018-09-20 04:42    [W:0.085 / U:1.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site