lkml.org 
[lkml]   [2018]   [Sep]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 04/12] PCI: brcmstb: add dma-range mapping for inbound traffic
On 20 September 2018 at 14:31, Florian Fainelli <f.fainelli@gmail.com> wrote:
> On 09/20/2018 02:04 PM, Ard Biesheuvel wrote:
>> On 20 September 2018 at 13:55, Florian Fainelli <f.fainelli@gmail.com> wrote:
>>> On 09/19/2018 07:19 PM, Ard Biesheuvel wrote:
>>>> On 19 September 2018 at 07:31, Jim Quinlan <jim2101024@gmail.com> wrote:
>>>>> The Broadcom STB PCIe host controller is intimately related to the
>>>>> memory subsystem. This close relationship adds complexity to how cpu
>>>>> system memory is mapped to PCIe memory. Ideally, this mapping is an
>>>>> identity mapping, or an identity mapping off by a constant. Not so in
>>>>> this case.
>>>>>
>>>>> Consider the Broadcom reference board BCM97445LCC_4X8 which has 6 GB
>>>>> of system memory. Here is how the PCIe controller maps the
>>>>> system memory to PCIe memory:
>>>>>
>>>>> memc0-a@[ 0....3fffffff] <=> pci@[ 0....3fffffff]
>>>>> memc0-b@[100000000...13fffffff] <=> pci@[ 40000000....7fffffff]
>>>>> memc1-a@[ 40000000....7fffffff] <=> pci@[ 80000000....bfffffff]
>>>>> memc1-b@[300000000...33fffffff] <=> pci@[ c0000000....ffffffff]
>>>>> memc2-a@[ 80000000....bfffffff] <=> pci@[100000000...13fffffff]
>>>>> memc2-b@[c00000000...c3fffffff] <=> pci@[140000000...17fffffff]
>>>>>
>>>>
>>>> So is describing this as
>>>>
>>>> dma-ranges = <0x0 0x0 0x0 0x0 0x0 0x40000000>,
>>>> <0x0 0x40000000 0x1 0x0 0x0 0x40000000>,
>>>> <0x0 0x80000000 0x0 0x40000000 0x0 0x40000000>,
>>>> <0x0 0xc0000000 0x3 0x0 0x0 0x40000000>,
>>>> <0x1 0x0 0x0 0x80000000 0x0 0x40000000>,
>>>> <0x1 0x40000000 0x0 0xc0000000 0x0 0x40000000>;
>>>>
>>>> not working for you? I haven't tried this myself, but since DT permits
>>>> describing the inbound mappings this way, we should fix the code if it
>>>> doesn't work at the moment.
>>>
>>> You mean encoding the memory controller index in the first cell? If that
>>> works, that's indeed a much cleaner solution, though is it standard
>>> compliant in any form?
>>
>> No those are just memory addresses (although I may have screwed up the
>> order). From Documentation/devicetree/booting-without-of.txt:
>>
>> """
>> Optional property:
>> - dma-ranges: <prop-encoded-array> encoded as arbitrary number of triplets of
>> (child-bus-address, parent-bus-address, length). Each triplet specified
>> describes a contiguous DMA address range.
>> """
>>
>
> Then I am confused by your comment, that's what this patch does, it adds
> support for reading "dma-ranges" from Device Tree and setting up inbound
> windows using that. The only caveat is that because the PCIe root
> complex has some ties with the memory bus architecture it is connected
> to (SCB in our case) there is still a requirement to know the
> translation between a given physical address and its backing memory
> controller/aperture.
>

Ah ok, apologies for the noise then.

I was hoping that having working support for dma-ranges would remove
the need for the special phys<->dma conversion routines.

\
 
 \ /
  Last update: 2018-09-20 23:34    [W:0.121 / U:0.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site