lkml.org 
[lkml]   [2018]   [Sep]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/4] [media] ad5820: Add support for enable pin
Hi!

> > > > ad5820: dac@0c {
> > > > compatible = "adi,ad5820";
> > > > reg = <0x0c>;
> > > >
> > > > VANA-supply = <&pm8994_l23>;
> > > > enable-gpios = <&msmgpio 26 GPIO_ACTIVE_HIGH>;
> > > > };
> > >
> > > Well, I'm sure you could have gpio-based regulator powered from
> > > pm8994_l23, and outputting to ad5820.
> > >
> > > Does ad5820 chip have a gpio input for enable?
> >
> > xshutdown pin:
> > http://www.analog.com/media/en/technical-documentation/data-sheets/AD5821.pdf
> >
> > (AD5820,AD5821, and AD5823 are compatibles, or at least that is waht
> > the module manufacturer says :)
>
> Aha, sorry for the noise.
>
> 2,3: Acked-by: Pavel Machek <pavel@ucw.cz>

And I forgot to mention. If ad5821 and ad5823 are compatible, it would
be good to mention it somewhere where it is easy to find... That can
save quite a bit of work to someone.

Thanks,
Pavel


--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-09-20 22:21    [W:0.681 / U:0.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site