lkml.org 
[lkml]   [2018]   [Sep]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 26/27] mmc: mmci: add DT bindings for STM32 sdmmc
Date
From: Ludovic Barre <ludovic.barre@st.com>

STM32 sdmmc variant has support to:
-Indicate signal directions (only one property
for d0dir, d123dir, cmd_dir)
-Select command and data phase relation.
-Select "clock in" from an external driver.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
---
Documentation/devicetree/bindings/mmc/mmci.txt | 9 +++++++++
drivers/mmc/host/mmci.c | 6 ++++++
drivers/mmc/host/mmci.h | 1 +
3 files changed, 16 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/mmci.txt b/Documentation/devicetree/bindings/mmc/mmci.txt
index e952707..d678933 100644
--- a/Documentation/devicetree/bindings/mmc/mmci.txt
+++ b/Documentation/devicetree/bindings/mmc/mmci.txt
@@ -19,6 +19,7 @@ Optional properties:
the ID provided by the HW
- vqmmc-supply : phandle to the regulator device tree node, mentioned
as the VCCQ/VDD_IO supply in the eMMC/SD specs.
+specific for ux500 variant:
- st,sig-dir-dat0 : bus signal direction pin used for DAT[0].
- st,sig-dir-dat2 : bus signal direction pin used for DAT[2].
- st,sig-dir-dat31 : bus signal direction pin used for DAT[3] and DAT[1].
@@ -26,6 +27,14 @@ Optional properties:
- st,sig-dir-cmd : cmd signal direction pin used for CMD.
- st,sig-pin-fbclk : feedback clock signal pin used.

+specific for sdmmc variant:
+- st,sig-dir : signal direction polarity used for cmd, dat0 dat123.
+- st,neg-edge : data & command phase relation, generated on
+ sd clock falling edge.
+- st,use-ckin : use ckin pin from an external driver to sample
+ the receive data (example: with voltage
+ switch transceiver).
+
Deprecated properties:
- mmc-cap-mmc-highspeed : indicates whether MMC is high speed capable.
- mmc-cap-sd-highspeed : indicates whether SD is high speed capable.
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index d622fbb..ce230cd 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -1708,6 +1708,12 @@ static int mmci_of_parse(struct device_node *np, struct mmc_host *mmc)
host->pwr_reg_add |= MCI_ST_CMDDIREN;
if (of_get_property(np, "st,sig-pin-fbclk", NULL))
host->pwr_reg_add |= MCI_ST_FBCLKEN;
+ if (of_get_property(np, "st,sig-dir", NULL))
+ host->pwr_reg_add |= MCI_STM32_DIRPOL;
+ if (of_get_property(np, "st,neg-edge", NULL))
+ host->clk_reg_add |= MCI_STM32_CLK_NEGEDGE;
+ if (of_get_property(np, "st,use-ckin ", NULL))
+ host->clk_reg_add |= MCI_STM32_CLK_SELCKIN;

if (of_get_property(np, "mmc-cap-mmc-highspeed", NULL))
mmc->caps |= MMC_CAP_MMC_HIGHSPEED;
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index 50098fa..3ad568c 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -389,6 +389,7 @@ struct mmci_host {
u32 pwr_reg;
u32 pwr_reg_add;
u32 clk_reg;
+ u32 clk_reg_add;
u32 datactrl_reg;
u32 busy_status;
u32 mask1_reg;
--
2.7.4
\
 
 \ /
  Last update: 2018-09-18 12:59    [W:0.119 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site