lkml.org 
[lkml]   [2018]   [Sep]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/4] Add i.MX6ULZ SoC support
From
Date
Hi Anson,

Am 18.09.2018 um 08:19 schrieb Anson Huang:
> This patch set adds i.MX6ULZ SoC support, i.MX6ULZ is a new SoC of
> i.MX6 family, compared to i.MX6ULL, it removes below modules:
>
> - UART5/UART6/UART7/UART8;
> - PWM5/PWM6/PWM7/PWM8;
> - eCSPI3/eCSPI4;
> - CAN1/CAN2;
> - FEC1/FEC2;
> - I2C3/I2C4;
> - EPIT2;
> - LCDIF;
> - GPT2;
> - TSC;
>
> And i.MX6ULZ has same soc_id as i.MX6ULL, but SRC_SBMR2 bit[6] is
> to differentiate i.MX6ULZ from i.MX6ULL, 1'b1 means i.MX6ULZ and
> 1'b0 means i.MX6ULL. i.MX6ULZ reuse most of i.MX6UL/i.MX6ULL code,
> just add the new CPU type and remove those non-exist modules from dtb.
>
> Anson Huang (4):
> ARM: dts: imx: add i.mx6ulz and i.mx6ulz 14x14 evk support
> ARM: imx: add i.mx6ulz msl support
> clk: imx6ul: add i.mx6ulz support
> dt-bindings: arm: add compatible for i.MX6ULZ 14x14 EVK board
>
>

i recommend the following patch order:
ARM: imx: add i.mx6ulz msl support
clk: imx6ul: add i.mx6ulz support
dt-bindings: arm: add compatible for i.MX6ULZ 14x14 EVK board
ARM: dts: imx: add i.mx6ulz and i.mx6ulz 14x14 evk support

Stefan

\
 
 \ /
  Last update: 2018-09-18 09:40    [W:0.089 / U:0.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site