lkml.org 
[lkml]   [2018]   [Sep]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] ASoC: AMD: Fix capture unstable in beginning for some runs
Date
alsa_conformance_test -C hw:0,4 -p 1024 --debug
would sometime show:
TIME_DIFF(s) HW_LEVEL READ RATE
0.000095970 1024 1024 10670001.041992
0.042609555 1024 2048 24032.168372
0.021330364 1024 3072 48006.681930
0.021339559 1024 4096 47985.996337
The issue is that in dma pointer function we can have stale value
of the register for current descriptor of channel.
The register retains the number of the last descriptor that
was transferred.

Fix ensures that we report position, 0, till the one period worth of
data is transferred. After one period of data, in handler of period
completion interrupt we update the config and correct value of descriptor
starts reflecting.

Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>

---
v2: fix overrun issue and missed case where bytescount = rtd->bytescount
sound/soc/amd/acp-pcm-dma.c | 22 ++++++++++++++--------
1 file changed, 14 insertions(+), 8 deletions(-)

diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c
index b0e245c..0ac4b5b 100644
--- a/sound/soc/amd/acp-pcm-dma.c
+++ b/sound/soc/amd/acp-pcm-dma.c
@@ -1035,16 +1035,22 @@ static snd_pcm_uframes_t acp_dma_pointer(struct snd_pcm_substream *substream)

if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
period_bytes = frames_to_bytes(runtime, runtime->period_size);
- dscr = acp_reg_read(rtd->acp_mmio, rtd->dma_curr_dscr);
- if (dscr == rtd->dma_dscr_idx_1)
- pos = period_bytes;
- else
- pos = 0;
bytescount = acp_get_byte_count(rtd);
- if (bytescount > rtd->bytescount)
+ if (bytescount >= rtd->bytescount)
bytescount -= rtd->bytescount;
- delay = do_div(bytescount, period_bytes);
- runtime->delay = bytes_to_frames(runtime, delay);
+ if (bytescount < period_bytes) {
+ pos = 0;
+ } else {
+ dscr = acp_reg_read(rtd->acp_mmio, rtd->dma_curr_dscr);
+ if (dscr == rtd->dma_dscr_idx_1)
+ pos = period_bytes;
+ else
+ pos = 0;
+ }
+ if (bytescount > 0) {
+ delay = do_div(bytescount, period_bytes);
+ runtime->delay = bytes_to_frames(runtime, delay);
+ }
} else {
buffersize = frames_to_bytes(runtime, runtime->buffer_size);
bytescount = acp_get_byte_count(rtd);
--
1.9.1
\
 
 \ /
  Last update: 2018-09-18 09:29    [W:0.059 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site