lkml.org 
[lkml]   [2018]   [Sep]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v8 07/26] PM / Domains: Add genpd governor for CPUs
On Fri, Sep 14, 2018 at 12:44 PM Lorenzo Pieralisi
<lorenzo.pieralisi@arm.com> wrote:
>
> On Fri, Sep 14, 2018 at 11:50:15AM +0200, Rafael J. Wysocki wrote:
> > On Thursday, August 9, 2018 5:39:25 PM CEST Lorenzo Pieralisi wrote:
> > > On Mon, Aug 06, 2018 at 11:20:59AM +0200, Rafael J. Wysocki wrote:
> > >
> > > [...]
> > >
> > > > >>> > @@ -245,6 +248,56 @@ static bool always_on_power_down_ok(struct dev_pm_domain *domain)
> > > > >>> > return false;
> > > > >>> > }
> > > > >>> >
> > > > >>> > +static bool cpu_power_down_ok(struct dev_pm_domain *pd)
> > > > >>> > +{
> > > > >>> > + struct generic_pm_domain *genpd = pd_to_genpd(pd);
> > > > >>> > + ktime_t domain_wakeup, cpu_wakeup;
> > > > >>> > + s64 idle_duration_ns;
> > > > >>> > + int cpu, i;
> > > > >>> > +
> > > > >>> > + if (!(genpd->flags & GENPD_FLAG_CPU_DOMAIN))
> > > > >>> > + return true;
> > > > >>> > +
> > > > >>> > + /*
> > > > >>> > + * Find the next wakeup for any of the online CPUs within the PM domain
> > > > >>> > + * and its subdomains. Note, we only need the genpd->cpus, as it already
> > > > >>> > + * contains a mask of all CPUs from subdomains.
> > > > >>> > + */
> > > > >>> > + domain_wakeup = ktime_set(KTIME_SEC_MAX, 0);
> > > > >>> > + for_each_cpu_and(cpu, genpd->cpus, cpu_online_mask) {
> > > > >>> > + cpu_wakeup = tick_nohz_get_next_wakeup(cpu);
> > > > >>> > + if (ktime_before(cpu_wakeup, domain_wakeup))
> > > > >>> > + domain_wakeup = cpu_wakeup;
> > > > >>> > + }
> > > > >>
> > > > >> Here's a concern I have missed before. :-/
> > > > >>
> > > > >> Say, one of the CPUs you're walking here is woken up in the meantime.
> > > > >
> > > > > Yes, that can happen - when we miss-predicted "next wakeup".
> > > > >
> > > > >>
> > > > >> I don't think it is valid to evaluate tick_nohz_get_next_wakeup() for it then
> > > > >> to update domain_wakeup. We really should just avoid the domain power off in
> > > > >> that case at all IMO.
> > > > >
> > > > > Correct.
> > > > >
> > > > > However, we also want to avoid locking contentions in the idle path,
> > > > > which is what this boils done to.
> > > >
> > > > This already is done under genpd_lock() AFAICS, so I'm not quite sure
> > > > what exactly you mean.
> > > >
> > > > Besides, this is not just about increased latency, which is a concern
> > > > by itself but maybe not so much in all environments, but also about
> > > > possibility of missing a CPU wakeup, which is a major issue.
> > > >
> > > > If one of the CPUs sharing the domain with the current one is woken up
> > > > during cpu_power_down_ok() and the wakeup is an edge-triggered
> > > > interrupt and the domain is turned off regardless, the wakeup may be
> > > > missed entirely if I'm not mistaken.
> > > >
> > > > It looks like there needs to be a way for the hardware to prevent a
> > > > domain poweroff when there's a pending interrupt or I don't quite see
> > > > how this can be handled correctly.
> > > >
> > > > >> Sure enough, if the domain power off is already started and one of the CPUs
> > > > >> in the domain is woken up then, too bad, it will suffer the latency (but in
> > > > >> that case the hardware should be able to help somewhat), but otherwise CPU
> > > > >> wakeup should prevent domain power off from being carried out.
> > > > >
> > > > > The CPU is not prevented from waking up, as we rely on the FW to deal with that.
> > > > >
> > > > > Even if the above computation turns out to wrongly suggest that the
> > > > > cluster can be powered off, the FW shall together with the genpd
> > > > > backend driver prevent it.
> > > >
> > > > Fine, but then the solution depends on specific FW/HW behavior, so I'm
> > > > not sure how generic it really is. At least, that expectation should
> > > > be clearly documented somewhere, preferably in code comments.
> > > >
> > > > > To cover this case for PSCI, we also use a per cpu variable for the
> > > > > CPU's power off state, as can be seen later in the series.
> > > >
> > > > Oh great, but the generic part should be independent on the underlying
> > > > implementation of the driver. If it isn't, then it also is not
> > > > generic.
> > > >
> > > > > Hope this clarifies your concern, else tell and will to elaborate a bit more.
> > > >
> > > > Not really.
> > > >
> > > > There also is one more problem and that is the interaction between
> > > > this code and the idle governor.
> > > >
> > > > Namely, the idle governor may select a shallower state for some
> > > > reason, for example due to an additional latency limit derived from
> > > > CPU utilization (like in the menu governor), and how does the code in
> > > > cpu_power_down_ok() know what state has been selected and how does it
> > > > honor the selection made by the idle governor?
> > >
> > > That's a good question and it maybe gives a path towards a solution.
> > >
> > > AFAICS the genPD governor only selects the idle state parameter that
> > > determines the idle state at, say, GenPD cpumask level it does not touch
> > > the CPUidle decision, that works on a subset of idle states (at cpu
> > > level).
> >
> > I've deferred responding to this as I wasn't quite sure if I followed you
> > at that time, but I'm afraid I'm still not following you now. :-)
> >
> > The idle governor has to take the total worst-case wakeup latency into
> > account. Not just from the logical CPU itself, but also from whatever
> > state the SoC may end up in as a result of this particular logical CPU
> > going idle, this way or another.
> >
> > So for example, if your logical CPU has an idle state A that may trigger an
> > idle state X at the cluster level (if the other logical CPUs happen to be in
> > the right states and so on), then the worst-case exit latency for that
> > is the one of state X.
>
> I will provide an example:
>
> IDLE STATE A (affects CPU {0,1}): exit latency 1ms, min-residency 1.5ms
>
> CPU 0 is about to enter IDLE state A since its "next-event" fulfill the
> residency requirements and exit latency constraints.
>
> CPU 1 is in idle state A (given that CPU 0 is ON, some of the common
> logic shared between CPU {0,1} is still ON, but, as soon as CPU 0
> enters idle state A CPU {0,1} can enter the "full" idle state A
> power savings mode).
>
> The current CPUidle governor does not check the "next-event" for CPU 1,
> that it may wake up in, say, 10us.

Right.

> Requesting IDLE STATE A is a waste of power (if firmware or hardware
> does not demote it since it does peek at CPU 1 next-event and actually
> demote CPU 0 request).

OK, I see.

That's because the state is "collaborative" so to speak. But was't
that supposed to be covered by the "coupled" thing?

> The current flat list of idle states has no notion of CPUs sharing
> an idle state request and that's where I think this series kicks in
> and that's the reason I say that the genPD governor can only demote
> an idle state request.
>
> Linking power domains to idle states is the only sensible way I see
> to define what logical cpus are affected by an idle state entry, this
> information is missing in the current kernel (whether that's wortwhile
> adding it that's another question).

OK, thanks for the clarification!

Cheers,
Rafael

\
 
 \ /
  Last update: 2018-09-14 13:35    [W:1.322 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site