lkml.org 
[lkml]   [2018]   [Sep]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[GIT PULL 1/3] bcm2835-dt-next-2018-09-09
Date
Hi Florian,

The following changes since commit 5b394b2ddf0347bef56e50c69a58773c94343ff3:

Linux 4.19-rc1 (2018-08-26 14:11:59 -0700)

are available in the git repository at:

git://github.com/anholt/linux tags/bcm2835-dt-next-2018-09-09

for you to fetch changes up to 6ef5bd6cfd5da9fe67aea031fd0a66ff77d64ad6:

ARM: dts: bcm283x-rpi-lan7515: Enable Ethernet LEDs (2018-09-05 21:31:25 +0200)

----------------------------------------------------------------
This pull request brings in a board DT for the Raspberry Pi Compute
Module 3, its I/O board and enables the Ethernet LEDs for the RPi 3B+.

----------------------------------------------------------------
Stefan Wahren (3):
dt-bindings: bcm: Add Raspberry Pi CM3 and CM3L
ARM: dts: add Raspberry Pi Compute Module 3 and IO board
ARM: dts: bcm283x-rpi-lan7515: Enable Ethernet LEDs

.../devicetree/bindings/arm/bcm/brcm,bcm2835.txt | 8 ++
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts | 87 ++++++++++++++++++++++
arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi | 52 +++++++++++++
arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi | 14 ++++
5 files changed, 162 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
create mode 100644 arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi

\
 
 \ /
  Last update: 2018-09-13 07:51    [W:0.855 / U:0.784 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site