lkml.org 
[lkml]   [2018]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] vfio/pci: Some buggy virtual functions incorrectly report 1 for intx.
Date
PCI_INTERRUPT_PIN should always read  0 for SRIOV Virtual Functions.

Some SRIOV devices have some bugs in RTL and VF's end up reading 1
instead of 0 for the PIN.

Since this is a spec required value, rather than having a device specific
quirk, we could fix it permanently in vfio.

Reworked suggestions from Alex https://lkml.org/lkml/2018/7/16/1052

Reported-by: Gage Eads <gage.eads@intel.com>
Tested-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: iommu@lists.linux-foundation.org
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Gage Eads <gage.eads@intel.com>
---
drivers/vfio/pci/vfio_pci.c | 12 +++++++++---
drivers/vfio/pci/vfio_pci_config.c | 3 ++-
2 files changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
index b423a30..32943dd 100644
--- a/drivers/vfio/pci/vfio_pci.c
+++ b/drivers/vfio/pci/vfio_pci.c
@@ -433,10 +433,16 @@ static int vfio_pci_get_irq_count(struct vfio_pci_device *vdev, int irq_type)
{
if (irq_type == VFIO_PCI_INTX_IRQ_INDEX) {
u8 pin;
- pci_read_config_byte(vdev->pdev, PCI_INTERRUPT_PIN, &pin);
- if (IS_ENABLED(CONFIG_VFIO_PCI_INTX) && !vdev->nointx && pin)
- return 1;
+ /*
+ * INTx must be 0 for all VF's. Enforce that for all
+ * VF's since this is a spec requirement.
+ */
+ if (!IS_ENABLED(CONFIG_VFIO_PCI_INTX) || vdev->nointx ||
+ vdev->pdev->is_virtfn)
+ return 0;

+ pci_read_config_byte(vdev->pdev, PCI_INTERRUPT_PIN, &pin);
+ return (pin ? 1 : 0);
} else if (irq_type == VFIO_PCI_MSI_IRQ_INDEX) {
u8 pos;
u16 flags;
diff --git a/drivers/vfio/pci/vfio_pci_config.c b/drivers/vfio/pci/vfio_pci_config.c
index 115a36f..e36b7c3 100644
--- a/drivers/vfio/pci/vfio_pci_config.c
+++ b/drivers/vfio/pci/vfio_pci_config.c
@@ -1676,7 +1676,8 @@ int vfio_config_init(struct vfio_pci_device *vdev)
*(__le16 *)&vconfig[PCI_DEVICE_ID] = cpu_to_le16(pdev->device);
}

- if (!IS_ENABLED(CONFIG_VFIO_PCI_INTX) || vdev->nointx)
+ if (!IS_ENABLED(CONFIG_VFIO_PCI_INTX) || vdev->nointx ||
+ pdev->is_virtfn)
vconfig[PCI_INTERRUPT_PIN] = 0;

ret = vfio_cap_init(vdev);
--
2.7.4
\
 
 \ /
  Last update: 2018-08-09 21:38    [W:0.111 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site