lkml.org 
[lkml]   [2018]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 2/2] media: usb: pwc: Don't use coherent DMA buffers for ISO transfer
2018-08-09 12:51 GMT+03:00 Laurent Pinchart <laurent.pinchart@ideasonboard.com>:
> Hi Matwey,
>
> Thank you for the patch.
>
> On Thursday, 9 August 2018 12:33:07 EEST Matwey V. Kornilov wrote:
>> DMA cocherency slows the transfer down on systems without hardware
>> coherent DMA. Instead we use noncocherent DMA memory and explicit sync at
>> data receive handler.
>>
>> Based on previous commit the following performance benchmarks have been
>> carried out. Average memcpy() data transfer rate (rate) and handler
>> completion time (time) have been measured when running video stream at
>> 640x480 resolution at 10fps.
>>
>> x86_64 based system (Intel Core i5-3470). This platform has hardware
>> coherent DMA support and proposed change doesn't make big difference here.
>>
>> * kmalloc: rate = (2.0 +- 0.4) GBps
>> time = (5.0 +- 3.0) usec
>> * usb_alloc_coherent: rate = (3.4 +- 1.2) GBps
>> time = (3.5 +- 3.0) usec
>>
>> We see that the measurements agree within error ranges in this case.
>> So theoretically predicted performance downgrade cannot be reliably measured
>> here.
>>
>> armv7l based system (TI AM335x BeagleBone Black @ 300MHz). This platform has
>> no hardware coherent DMA support. DMA coherence is implemented via disabled
>> page caching that slows down memcpy() due to memory controller behaviour.
>>
>> * kmalloc: rate = (114 +- 5) MBps
>> time = (84 +- 4) usec
>> * usb_alloc_coherent: rate = (28.1 +- 0.1) MBps
>> time = (341 +- 2) usec
>>
>> Note, that quantative difference leads (this commit leads to 4 times
>> acceleration) to qualitative behavior change in this case. As it was
>> stated before, the video stream cannot be successfully received at AM335x
>> platforms with MUSB based USB host controller due to performance issues
>> [1].
>>
>> [1] https://www.spinics.net/lists/linux-usb/msg165735.html
>>
>> Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru>
>> ---
>> drivers/media/usb/pwc/pwc-if.c | 47 ++++++++++++++++++++++++++++-----------
>> 1 file changed, 35 insertions(+), 12 deletions(-)
>>
>> diff --git a/drivers/media/usb/pwc/pwc-if.c b/drivers/media/usb/pwc/pwc-if.c
>> index 72d2897a4b9f..17f2015a75bb 100644
>> --- a/drivers/media/usb/pwc/pwc-if.c
>> +++ b/drivers/media/usb/pwc/pwc-if.c
>> @@ -159,6 +159,31 @@ static const struct video_device pwc_template = {
>> /**************************************************************************
>> */ /* Private functions */
>>
>> +static void* pwc_alloc_urb_buffer(struct device *dev, size_t size,
>> dma_addr_t *dma_handle) {
>
> There are several violations of the Linux coding style here, could you please
> run your patch through checkpatch.pl to fix them ?

Thanks. I'll fix them. I really need to configure git hooks with checkpatch.

>
>> + void* buffer = kmalloc(size, GFP_KERNEL);
>> +
>> + if (buffer == NULL) {
>> + goto fail_kmalloc;
>> + }
>
> No need for a goto, you can just return NULL here.
>
>> + *dma_handle = dma_map_single(dev, buffer, size, DMA_FROM_DEVICE);
>> + if (dma_mapping_error(dev, *dma_handle)) {
>> + goto fail_dma_map_single;
>
> And you can inline the error handling code here as it's used from a single
> location.
>
>> + }
>> +
>> + return buffer;
>> +
>> +fail_dma_map_single:
>> + kfree(buffer);
>> +fail_kmalloc:
>> + return NULL;
>> +}
>> +
>> +static void pwc_free_urb_buffer(struct device *dev, size_t size, void*
>> buffer, dma_addr_t dma_handle) {
>> + dma_unmap_single(dev, dma_handle, size, DMA_FROM_DEVICE);
>> + kfree(buffer);
>> +}
>> +
>> static struct pwc_frame_buf *pwc_get_next_fill_buf(struct pwc_device *pdev)
>> {
>> unsigned long flags = 0;
>> @@ -306,6 +331,8 @@ static void pwc_isoc_handler(struct urb *urb)
>> /* Reset ISOC error counter. We did get here, after all. */
>> pdev->visoc_errors = 0;
>>
>> + dma_sync_single_for_cpu(&urb->dev->dev, urb->transfer_dma,
>> urb->transfer_buffer_length, DMA_FROM_DEVICE);
>> +
>> /* vsync: 0 = don't copy data
>> 1 = sync-hunt
>> 2 = synched
>> @@ -428,16 +455,13 @@ static int pwc_isoc_init(struct pwc_device *pdev)
>> urb->dev = udev;
>> urb->pipe = usb_rcvisocpipe(udev, pdev->vendpoint);
>> urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
>> - urb->transfer_buffer = usb_alloc_coherent(udev,
>> - ISO_BUFFER_SIZE,
>> - GFP_KERNEL,
>> - &urb->transfer_dma);
>> + urb->transfer_buffer_length = ISO_BUFFER_SIZE;
>> + urb->transfer_buffer = pwc_alloc_urb_buffer(&udev->dev,
>> urb->transfer_buffer_length, &urb->transfer_dma);
>> if (urb->transfer_buffer == NULL) {
>> PWC_ERROR("Failed to allocate urb buffer %d\n", i);
>> pwc_isoc_cleanup(pdev);
>> return -ENOMEM;
>> }
>> - urb->transfer_buffer_length = ISO_BUFFER_SIZE;
>> urb->complete = pwc_isoc_handler;
>> urb->context = pdev;
>> urb->start_frame = 0;
>> @@ -488,15 +512,14 @@ static void pwc_iso_free(struct pwc_device *pdev)
>>
>> /* Freeing ISOC buffers one by one */
>> for (i = 0; i < MAX_ISO_BUFS; i++) {
>> - if (pdev->urbs[i]) {
>> + struct urb* urb = pdev->urbs[i];
>> +
>> + if (urb) {
>> PWC_DEBUG_MEMORY("Freeing URB\n");
>> - if (pdev->urbs[i]->transfer_buffer) {
>> - usb_free_coherent(pdev->udev,
>> - pdev->urbs[i]->transfer_buffer_length,
>> - pdev->urbs[i]->transfer_buffer,
>> - pdev->urbs[i]->transfer_dma);
>> + if (urb->transfer_buffer) {
>> + pwc_free_urb_buffer(&urb->dev->dev, urb->transfer_buffer_length,
>> urb->transfer_buffer, urb->transfer_dma); }
>> - usb_free_urb(pdev->urbs[i]);
>> + usb_free_urb(urb);
>> pdev->urbs[i] = NULL;
>> }
>> }
>
> --
> Regards,
>
> Laurent Pinchart
>
>
>



--
With best regards,
Matwey V. Kornilov.
Sternberg Astronomical Institute, Lomonosov Moscow State University, Russia
119234, Moscow, Universitetsky pr-k 13, +7 (495) 9392382

\
 
 \ /
  Last update: 2018-08-09 12:09    [W:0.040 / U:54.908 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site