lkml.org 
[lkml]   [2018]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 12/14] drm/mediatek: use layer_nr function to get layer number to init plane
Date
This patch use layer_nr function to get layer number to init plane

When plane init in crtc create,
it use the number of OVL layer to init plane.
That's OVL can read 4 memory address.

For mt2712 third ddp, it use RDMA to read memory.
RDMA can read 1 memory address, so it just init one plane.

For compatibility, this patch use mtk_ddp_comp_layer_nr function
to get layer number from their HW component in ddp for plane init.

Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 21 ++++++++++++++-------
drivers/gpu/drm/mediatek/mtk_drm_crtc.h | 1 -
2 files changed, 14 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index 2d6aa150a9ff..845d1608465e 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -45,7 +45,8 @@ struct mtk_drm_crtc {
bool pending_needs_vblank;
struct drm_pending_vblank_event *event;

- struct drm_plane planes[OVL_LAYER_NR];
+ struct drm_plane *planes;
+ unsigned int layer_nr;
bool pending_planes;

void __iomem *config_regs;
@@ -286,7 +287,7 @@ static int mtk_crtc_ddp_hw_init(struct mtk_drm_crtc *mtk_crtc)
}

/* Initially configure all planes */
- for (i = 0; i < OVL_LAYER_NR; i++) {
+ for (i = 0; i < mtk_crtc->layer_nr; i++) {
struct drm_plane *plane = &mtk_crtc->planes[i];
struct mtk_plane_state *plane_state;

@@ -351,7 +352,7 @@ static void mtk_crtc_ddp_config(struct drm_crtc *crtc)
}

if (mtk_crtc->pending_planes) {
- for (i = 0; i < OVL_LAYER_NR; i++) {
+ for (i = 0; i < mtk_crtc->layer_nr; i++) {
struct drm_plane *plane = &mtk_crtc->planes[i];
struct mtk_plane_state *plane_state;

@@ -403,7 +404,7 @@ static void mtk_drm_crtc_atomic_disable(struct drm_crtc *crtc,
return;

/* Set all pending plane state to disabled */
- for (i = 0; i < OVL_LAYER_NR; i++) {
+ for (i = 0; i < mtk_crtc->layer_nr; i++) {
struct drm_plane *plane = &mtk_crtc->planes[i];
struct mtk_plane_state *plane_state;

@@ -450,7 +451,7 @@ static void mtk_drm_crtc_atomic_flush(struct drm_crtc *crtc,

if (mtk_crtc->event)
mtk_crtc->pending_needs_vblank = true;
- for (i = 0; i < OVL_LAYER_NR; i++) {
+ for (i = 0; i < mtk_crtc->layer_nr; i++) {
struct drm_plane *plane = &mtk_crtc->planes[i];
struct mtk_plane_state *plane_state;

@@ -598,7 +599,12 @@ int mtk_drm_crtc_create(struct drm_device *drm_dev,
mtk_crtc->ddp_comp[i] = comp;
}

- for (zpos = 0; zpos < OVL_LAYER_NR; zpos++) {
+ mtk_crtc->layer_nr = mtk_ddp_comp_layer_nr(mtk_crtc->ddp_comp[0]);
+ mtk_crtc->planes = devm_kzalloc(dev, mtk_crtc->layer_nr *
+ sizeof(struct drm_plane),
+ GFP_KERNEL);
+
+ for (zpos = 0; zpos < mtk_crtc->layer_nr; zpos++) {
type = (zpos == 0) ? DRM_PLANE_TYPE_PRIMARY :
(zpos == 1) ? DRM_PLANE_TYPE_CURSOR :
DRM_PLANE_TYPE_OVERLAY;
@@ -609,7 +615,8 @@ int mtk_drm_crtc_create(struct drm_device *drm_dev,
}

ret = mtk_drm_crtc_init(drm_dev, mtk_crtc, &mtk_crtc->planes[0],
- &mtk_crtc->planes[1], pipe);
+ mtk_crtc->layer_nr > 1 ? &mtk_crtc->planes[1] :
+ NULL, pipe);
if (ret < 0)
goto unprepare;
drm_mode_crtc_set_gamma_size(&mtk_crtc->base, MTK_LUT_SIZE);
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.h b/drivers/gpu/drm/mediatek/mtk_drm_crtc.h
index 9d9410c67ae9..60bcc8aba8e3 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.h
@@ -18,7 +18,6 @@
#include "mtk_drm_ddp_comp.h"
#include "mtk_drm_plane.h"

-#define OVL_LAYER_NR 4
#define MTK_LUT_SIZE 512
#define MTK_MAX_BPC 10
#define MTK_MIN_BPC 3
--
2.12.5.2.gbdf23ab
\
 
 \ /
  Last update: 2018-08-09 04:17    [W:0.122 / U:20.280 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site